Sun Microsystems Ethernet PCI Adapter - Manual
Sun Microsystems Ethernet PCI Adapter – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Note –
- Page 4 – instructions for the following three steps.; Power off your system and open the system unit.; command to list the system’s network; hme
-
Page 5 – Perform a reconfiguration boot on your system.; grep; command to search the; Using the instance number found in Step 7, rename the;
file previously used by the SunSwift PCI adapter to -
Page 7 –
file previously used by the Sun FastEthernet PCI; adapter to reflect the new instance number. - Page 8 – Using the; test net; Known Problems; Fiber Optic Transceivers
- Page 9 – Autonegotiation; Autonegotiation is broken (10Mbps) in the
901 San Antonio Road
Palo Alto, California 94303 USA
415 960-1300
fax 415 969-9131
A Sun Microsystems, Inc. Business
Sun
™
FastEthernet PCI
Adapter Product Note
Part No.: 805-2715-10
Revision A, August 1997
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 Sun FastEthernet PCI AdapterProduct Note This document contains the late-breaking news and documentation updates for theSun™ FastEthernet™ PCI adapter. Replacing a SunSwift PCI Adapter Witha Sun FastEthernet PCI Adapter in theSame PCI Slot Your system will encounter network problems if you replace...
2 Sun FastEthernet PCI Adapter Product Note • August 1997 ▼ To Replace the SunSwift PCI Adapter With aSun FastEthernet PCI Adapter in the Same PCISlot Note – Refer to your system’s installation or service manual for detailed instructions for the following three steps. 1. Power off your system and op...
Sun FastEthernet PCI Adapter Product Note 3 6. Perform a reconfiguration boot on your system. After rebooting your system, login as super-user (root). 7. At the command line, use the grep command to search the /etc/path_to_inst file for hme devices. In the example above, the network@1,1 instance is ...
