Sun Microsystems DC200 - Manual
Sun Microsystems DC200 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Installing DIMMs; Note –; Use only dual inline memory modules (DIMMs) that
- Page 4 – Power off your system and open the system unit.
- Page 5 – Insert the DIMM into the first vacant socket.; DIMM slots
- Page 6 – There are four DIMM slots. The one nearest to the; Caution –; If you do not seat the DIMM into its slot evenly,; Detach the wrist strap and close the system unit.
DIMM Installation Guide
Netra T1 AC200 and DC200 Servers
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Installing DIMMs Note – Use only dual inline memory modules (DIMMs) that are specifically designed for the Netra™ T1 AC200 andDC200 servers. There are two DIMMs available: a 256 MbyteDIMM (sales part number X7083A) and a 512 Mbyte DIMM(sales part number X7084). For the maximum 2 Gbytes ofmemory, ins...
1. Power off your system and open the system unit. Remove the top cover by following the procedure described in theNetra T1 AC200 and DC200 Server User ’s Guide (part number 806-5978-10). Make sure you disconnect all power cables and wear anantistatic wrist strap. 2. Locate the wrist strap, and atta...
Figure 1-2 Inserting a DIMM into Slot 0 5. Insert the DIMM into the first vacant socket. For illustrations of the correct insertion procedure, refer to thediagrams labeled “Memory insertion” inside the top cover of thesystem. If your system contains no DIMMs, use Slot 0 first (seenext Note box). DIM...
