Sun Microsystems 1 - Manual
Sun Microsystems 1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Quick Installation Instructions; To Install the Adapter
- Page 4 – To Install the Software; Install the software by entering
- Page 5 – Configure the Host Files; Assign the IP address by using
- Page 6 – Documentation Updates; Hardware Requirements
- Page 7 – LED Indicators; GigabitEthernet Link Negotiation; Purchasing Fiber Cables
- Page 8 – Configuring Driver Parameters; To Temporarily Change a Parameter; To access the parameters you can change using; type the following command:
- Page 9 – To change the default settings, use the following format:; Open Issues; Flow Control
901 San Antonio Road
Palo Alto, CA 94303 USA
415 960-1300
fax 415 969-9131
A Sun Microsystems, Inc. Business
Sun
™
GigabitEthernet PCI
Adapter 1.0 Product Notes
Part No.: 805-1138-10
Revision A, August 1997
SunSoft, Inc.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 Sun GigabitEthernet PCI AdapterProduct Notes These release notes provide the latest software information about the SunGigabitEthernet PCI Adapter 1.0. It is a supplement to the Sun GigabitEthernet PCIAdapter 1.0 User ’s Guide. Quick Installation Instructions This section provides you an overview o...
2 Sun GigabitEthernet PCI Adapter 1.0 Product Notes • August 1997 ▼ To Install the Software 1. Become root. 2. Place the CD-ROM into the CD-ROM drive. 3. Mount the CD-ROM on a local directory. If the Volume Manager (vold) is running, on your machine, then the CD-ROM ismounted automatically under /cd...
Sun GigabitEthernet PCI Adapter Product Notes 3 8. When you have finished loading the software, unmount the CD-ROM directory: If the automounter fails to flush a previous mount point, you may see the followingdirectory: If this should happen, remove the empty directory. ▼ Configure the Host Files 1....
