Sun Joe 24V-TLR-LTE - User Manual

© 2020 by Snow Joe

®

, LLC

All rights reserved. Original instructions.

SAVE THESE INSTRUCTIONS

1

EN

A Division of Snow Joe

®

, LLC

24V-TLR-LTE

Form No. SJ-24V-TLR-LTE-880E-MR4

R

OPERATOR’S MANUAL

CORDLESS TILLER + CULTIVATOR

24V MAX* | 2.0 Ah | 6" STEEL TILLING BLADES

IMPORTANT!

Safety Instructions
All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

General Safety WARNINGS!

You and any other operator of this cordless tiller + cultivator

must read, understand, and follow these instructions in their

entirety. Failure to follow these instructions may result in

ELECTRIC SHOCK, FIRE, and/or serious PERSONAL INJURY.
Notice the personal safety alert symbol

m

used in this

manual to draw your attention to a WARNING given along

with the particular operating instruction. This means that

the operation requires special ATTENTION, CAUTION, and

AWARENESS.

1. Keep work area clean and well-lit – Cluttered, dark

areas invite accidents.

2. Replacement parts – When servicing this unit, use only

identical replacement parts. Replace or repair damaged

parts immediately.

3. Keep children, bystanders, and pets away –

All spectators, including pets, should be kept a safe

distance away from the work area.

4. Know your product – Know how to start and stop the

machine. Be thoroughly familiar with the controls.

5. Use the right tool – Do not use this machine for any job

except that for which it was intended.

6. Dress properly – Do not wear loose clothing or jewelry as

such articles can become caught in moving parts.

Wear a protective covering to contain long hair.

Wearing rubber gloves and substantial non-slip footwear

is recommended when working outdoors.

7. Avoid accidental starting – Do not carry the cordless

tiller + cultivator

with your finger on the switch.

m

CAUTION!

Moving parts will continue to run for several

seconds after turning off the machine.

8. Moving parts – Keep hands and feet away from moving

parts. Keep guards in place and in proper working order.

9. Do not force the tool – It will perform better with less

likelihood of personal or mechanical injury if it is used at

the rate for which it was designed.

10. Do not overreach – Keep proper footing and balance at

all times.

If the cordless tiller + cultivator strikes a foreign object,

follow these steps:

•

Stop the cordless tiller + cultivator.

•

Inspect for damage.

•

Repair any damage before restarting and

operating the tool.

11. Use safety glasses – Also use safety footwear,

snug-fitting clothing, protective gloves, hearing, and head

protection.

12. Remove the battery – Remove the battery from the

cordless tiller + cultivator when it is not in use,

before servicing it, when changing accessories,

and when performing any other maintenance task.

13. Store idle tool indoors – When not in use, the cordless

tiller + cultivator should be stored indoors in a dry and

high or locked-up place out of the reach of children.

14. Maintain the cordless tiller + cultivator with care –

Keep the cutting edges sharp and clean for optimal

performance and to reduce the risk of injury.

Keep the handles dry, clean, and free from oil and grease.

Follow the additional recommendations described in the

maintenance section of this manual.

15. Avoid dangerous environments – Do not use the tiller

+ cultivator in rain or in damp or wet locations. Do not

operate the tiller + cultivator in gaseous or explosive

atmospheres or use the tiller + cultivator near flammable

or combustible liquids. Motors in these tools normally

spark, and the sparks might ignite fumes.

16. Stay alert – Watch what you are doing. Use common

sense. Do not operate the cordless tiller + cultivator when

you are tired or under the influence of drugs, alcohol

,

or other medication.

17. Check for damaged parts – Before further use of the

appliance, a guard or other part that is damaged should be

carefully checked to determine that it will operate properly

and perform its intended function. Check for alignment of

moving parts, binding of moving parts, breakage of parts,

mounting, and any other condition that may affect its

operation. A guard or other part that is damaged should

be properly repaired or replaced. Contact the Snow Joe

®

+ Sun Joe

®

customer service center at 1-866-SNOWJOE

(1-866-766-9563) for assistance.