Summit Appliance SCFF-55 - Manual
Summit Appliance SCFF-55 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – We Care for the Environment
- Page 3 – IMPORTANT; Disposing of the Worn Out Appliance
- Page 4 – PLACING AND INSTALLATION; Connection to Power Supply; “DO NOT USE AN EXTENSION CORD.”; Operation Control
- Page 5 – Storing Fresh Foods; Food should not touch the rear wall of the freezer.
- Page 6 – Cleaning the Appliance; Switch Off the Appliance When Not in Use
- Page 7 – Trouble-Shooting Guide
- Page 8 – Door swing reversal
- Page 9 – Noise; Before Calling for Service; Specifications are Subject to Change Without
FELIX
STORCH,
INC.
SUMMIT
APPLIANCE
DIVISION®
INSTRUCTION MANUAL FOR MODEL:
SCFF-55
ALL-FREEZER
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
*Before Putting Into UsE* Before connecting the appliance to the power supply, leave it standing for about 2 hours, this will reduce the possibility of malfunctions in the cooling system due to transport handling. Clean the appliance thoroughly; especially in the interior (See Cleaning and Maintenan...
IMPORTANT If you bought this appliance to replace an old one equipped with a lock that cannot be opened from inside (lock, bolt), make sure that the lock is broken. This will make it impossible for children to lock themselves inside the appliance and suffocate. The appliance must be correctly connec...
PLACING AND INSTALLATION It is important to make sure the appliance is leveled evenly to prevent falling. Two spacers attached to the appliance must be fitted onto the upper edge of the condenser, thus preventing the appliance from being installed too close to the wall. Spacers are manufactured for ...
