Page 2 - Ster ling Ma te rial Pro cess ing; These op er at ing in struc tions are for:
Parts and Ser vice: Tele phone: (800) 423-3183 Edi tion: 12/98 a 5 3 6- 3 M S SFC-A 2 Ster ling Ma te rial Pro cess ing 5200 West Clinton Ave. Mil wau kee, WI 53223 Tele phone: (414) 354-0970Fax: (414) 354-6421 www.sterlco.com These op er at ing in struc tions are for: * Se ri al num ber: Built in: ...
Page 3 - All rights re served.
Ster ling Ma te rial Pro cess ing re tains all rights to change the in for ma tion in theseop er at ing in struc tions at any time with out no tice. We as sume no li a bil ity for any er rors or di rect or in di rect dam age re sult ing in con -text with these op er at ing in struc tions. Copying, t...
Page 5 - Ta ble of con tents
Ta ble of con tents 1. Safety in struc tions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1.1. Warn ings and sym bols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.2. Ex pla na tions and in for ma tion . . . . . . . . . . . . . ....
Page 7 - Safety in struc tions; Safety in struc tions 6
1. Safety in struc tions » These safety in struc tions ap ply to all per sons within the range of ac tion of the equip ment. Please in form all per sons within the range of ac tion of theequip ment of the di rect and in di rect haz ards con nected withthe equip ment. These op er at ing in struc tion...
Page 8 - Safety in struc tions 7
1.1. Warn ings and sym bols The fol low ing warn ings and sym bols are used in these op er at ing in struc tions: » This sym bol in di cates dan ger to life! Fa tal or se ri ous in jury ispos si ble if the cor re spond ing in struc tions, reg u la tions orwarn ings are not ob served. L This sym bol ...
Page 10 - Safety in struc tions 9
1.3. For your safety · The op er at ing per son nel of this equip ment must be at least 16 years old. · Please read these op er at ing in struc tions care fully be fore tak ing into op er a tion forthe first time. Con tact us should ques tions arise. This avoids in jury and dam age to equip ment! · ...
Page 11 - Safety in struc tions 10
· Do not mod ify, add other equip ment or change the de sign of the equip ment with -out the ap proval of the man u fac turer. Cau tion: Dan ger of ac ci dents! · Com pile de tailed op er at ing in struc tions based on these Op er ating in struc tions for the se quence of pro ce dures to be car ried...
Page 12 - Safety in struc tions 11
· This equip ment is not suit able for food pro cess ing. · Please note that sound lev els ex ceed ing 85 db(A) may in the long term dam ageyour health. Use the ap pro pri ate ear muffs. This avoids im pair ment of hear ing! · At tach ments not sup plied by Ster ling must be man u fac tured in ac co...
Page 14 - All com po nents must be suf fi ciently grounded.; Safety in struc tions 13
· Check the col lect ing con tainer for tight ness fol low ing each clean ing pro ce dure. · Make sure that the one-way restrictor reg u la tion should not be changed. · The op er at ing in struc tions of the con nected ma chines must be fol lowed. · All com po nents must be suf fi ciently grounded....
Page 15 - In stal la tion in struc tions; En sure in each case that the per son nel are in formed.; In stal la tion in struc tions 14
2. In stal la tion in struc tions » These in stal la tion in struc tions are in tended for per sons withskills in elec tri cal and me chan i cal ar eas due to their train ing,ex pe ri ence and re ceived in struc tions. Per son nel us ing these in stal la tion in struc tions must be in -structed in t...
Page 16 - In stal la tion in struc tions 15
F In stall the equip ment such that all parts are eas ily ac ces si ble; this fa cil i tates main te nance and re pair work. a 5 3 6- 3 M S SFC-A In stal la tion in struc tions 15
Page 17 - In stal la tion in struc tions 16
2.1. Trans port The unit is de liv ered as a com plete sub-assembly. Trans port the unit on a pal let.Lift the unit only by the wall sup port flange (B) or by the sep a ra tor con tainer (A).Use only suit able lift ing gear (e.g. hoist ing crane or fork lift). » Ob serve the car ry ing ca pac ity of...
Page 18 - In stal la tion in struc tions 17
2.2. In stal la tion For in stal la tion, the wall sup port flange (A) is used. F In stall the safety fil ter by means of four screws which guar an -tee a car ry ing ca pac ity of at least 100 kg (220 lbs.). In stall the safety fil ter in the suc tion tube di rectly be fore the vac uum gen er a tor....
Page 19 - In stal la tion in struc tions 18
2.3. Com pressed air sup ply For op er a tion of the valve, a com pressed-air sup ply (1/4 “) is needed. Check com pressed air pip ing for cor rect in stal la tion and as sem bly. Check fit tings, length and qual ity of the hose con nec tions for agree ment with re -quire ments. The op er at ing pre...
Page 20 - Ob serve the elec tri cal man ual of the con vey ing sys tem.; In stal la tion in struc tions 19
2.4. Elec tri cal con nec tion » The elec tri cal con nec tion may only be car ried out by trainedper son nel. The reg u la tions of the lo cal Elec tric ity Board must be ob -served. All work must be car ried out with the unit dis con nected fromvolt age and pres sure sup ply. It is not per mit ted...
Page 21 - In stal la tion in struc tions 20
a 5 3 6- 3 M S SFC-A In stal la tion in struc tions 20 1 2 3 4 5 6 VV 1 2 4 5 6 3 Han 6 S1 AV Con nec tion hous ing S1 = Sa fe ty switch AV = Clea ning val ve, top VV = Va cu um val ve, side
Page 22 - Func tioning de scrip tion; Func tioning de scrip tion 21
3. Func tioning de scrip tion » This func tion ing de scrip tion is in tended for all op er at ing per -son nel of the equip ment. Pre req ui site for this func tion ing de scrip tion is gen eral knowl -edge of con vey ing sys tems. En sure in each case that the op er at ing per son nel are suf fi -...
Page 23 - Func tioning de scrip tion 22
3.1. Gen eral The safety fil ter is used to clean the vac uum air of the en tire sys tem and must bein stalled in ev ery multi-location suc tion con veyor sys tem . A fil ter car tridge in side the safety fil ter sep a rates the vac uum air from the dustpar ti cles flow ing along with it. Vac uum pr...
Page 24 - Putting into op er a tion; This chap ter is in tended for op er at ing per son nel.; Putting into op er a tion 23
4. Putting into op er a tion » This chap ter is in tended for op er at ing per son nel. Pre req ui site for this chap ter is gen eral knowl edge of the op -er a tion of con vey ing sys tems. Also pre req ui site for this chap ter is that the func tion ing de -scrip tion has been read and un der stoo...
Page 26 - Main te nance 25
5. Main te nance » This chap ter is in tended for per sons with skills in elec tri caland me chan i cal ar eas due to their train ing, ex pe ri ence andre ceived in struc tions. Per son nel us ing the in struc tions in this chap ter must be in -structed of the reg u la tions for the pre ven tion of ...
Page 27 - Main te nance 26
L Dis con nect the equip ment from mains sup ply be fore start ingmain te nance pro ce dures to en sure that it can not be switched on un in ten tion ally. Depressurize all com pressed air pip ing of the equip ment be -fore start ing main te nance work. F Please ob serve the main te nance in ter val...
Page 28 - Main te nance 27
5.1. Main te nance in ter vals Daily: Check warn ing signs on equip ment for good leg i bil ity and com plete ness. Check the oil level in the oiler. Empty the wa ter sep a ra tor. Check op er at ing pres sure of the plant’s sup ply net work (5-6 bar (72-87 PSI) sys tem overpressure). Check waste le...
Page 29 - Main te nance 28
5.2. Clean col lect ing con tainer L For clean ing of the col lect ing con tainer, the plant should beswitched off. Open the tog gle-type fas ten - ers (C) on the sup port (B). Thecol lect ing con tainer (A) turnsdown to gether with the hold ingclamp. Pull the col lect ing con tainer (A) out of the ...
Page 31 - Main te nance 30
In stall the fil ter car tridge in the sep a ra tor con tainer (C). In stall the sep a ra tor lid (A) on the sep a ra tor con tainer (C). Mount the tight en ing strap (B) be tween the sep a ra tor lid (A) and the sep a ra torcon tainer (C). & Or der num ber fil ter car tridge: ID 86348 a 5 3 6- ...
Page 32 - Tech ni cal data 31
6. Tech ni cal data Ver sions: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SFC-A 40/50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SFC-A 65 Height: . . . . . . . . . . . . . . . . . . . . . ...
Page 33 - Tech ni cal data 32
6.1. Data sheet a 5 3 6- 3 M S SFC-A Tech ni cal data 32 41O mm 16.15" A 47O mm 18.5" 4OO mm 15.75" A 1 6 O m m 6 .3 " 1 5 O 0 m m 5 9 " 12 mm 0.47" A SFC-A 40: 40 mm; 1,6" SFC-A 50: 50 mm; 2,0" SFC-A 65: 65 mm; 2,5 “ Di men sions in mm. Spe ci fi ca tions may be sub ...
Page 34 - Ap pen dix 33
Page 35 - Ap pen dix 34
7.1. Spare parts list » This spare parts list is in tended to be used only by trained per -son nel. Other per sons are not per mit ted to mod ify or re pair the equip -ment. a 5 3 6- 3 M S SFC-A Ap pen dix 34
Page 36 - Ap pen dix 35
SFC-A 40/50/65 a 5 3 6- 3 M S SFC-A Ap pen dix 35 21 68 32 51 49 55 69 16 60 17 61 20 14 12 35 37 3 86 1 80 48 34 85
