Sterling SDAP - Manual

Sterling SDAP – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1

2

3

4

Page: / 4 Go to

Next Page

PDF Text Table of Contents

Table of Contents:

• Page 2 – SDAP Nomad Dryer with AP1 Control; Complete Operation and Installation Instructions; Sterling; Bulletin No: DH1-315.02; Start & Stop Conveying Feature; Convey to One Machine
• Page 3 – Maintenance; Cooling Coils: Cleaning and Replacement Procedures; Shut down the dryer, tag out and lock out the controls if; Filters: Recommendations for Cleaning and; Replacing; Vacuuming
• Page 4 – Spare Parts List

Loading the manual

SDAP Nomad Dryer with AP1 Control

Reference Manual (PN: 882.00281.00) for

Complete Operation and Installation Instructions

(Available online at www.sterlco.com)

Sterling

Part No:

682.92636.03

2900 S. 160

th

Street • New Berlin, WI 53151 USA

Bulletin No: DH1-315.02

Tel. 262.641.8610 • Fax 262.641.8653

Auto-Tuning the Dryer

1.

From the “Dryer Status” screen, press “Dry Menu”.

2.

Select Auto Tune to gain access to this screen. The

Access Code

into the Auto

Tune screen is:

1234

.

Note:

The auto tune feature can be enabled by pressing the

PUSH TO START

button.

AUTOTUNE IN PROGRESS

or

PROCESS NOT ACTIVE

will

inform the operator of the current status of this feature.

3.

At this point, the operator can return back to the

DRYER MENU

or

MAIN MENU

by touching the appropriate button on the screen.

Setting the Redundant Safety Controller

•

The Redundant Safety Controller alarm setting is changed
by pressing the up and down keys, which inputs the alarm
value.

•

The upper display reading indicates the Process Value,
while the lower display indicates the

High Point Setting

alarm value.

Quick Start Pre-Startup Checklist

1. Check the process and return hoses for tight connections.
2. Check all companion equipment, such as the drying hopper; verify the

loading system is ready for operation.

3. Verify all dryer electrical connections are tight.
4. Verify the thermocouple is properly installed at the hopper inlet.
5. Verify temperature unit/scale (°F or °C).

Quick Startup Checklist

1. Turn

ON

the power disconnect switch in your power drop, then turn

ON

the

power disconnect switch on the dryer.

2. Turn the dryer

ON/OFF

switch to

ON

to energize the display panel.

3. Check the display for the proper temperature scale (°F or °C).
4. Close the slide gate at the bottom of the drying hopper.
5. Fill the drying hopper with material.
6. Press

the

START

button on the touch screen to start the dryer (Display will

change to

SHUTDOWN

). The process blower starts.

a. Make sure the blower turns in the correct direction.
b. Disconnect the hose from drying hopper to the filter.
c. Quickly

turn

the

ON/OFF

switch to

OFF

. You

should feel a suction at the inlet of the filter. (Secure the
hose back in place).

Setting the Process Air Temperature

1. Press and hold the

SET POINT

Display until a number key pad appears.

2. Enter the values you would like to set in the screen by pressing the number keys.

3. Press

ENT

(Enter) when you are finished.

UP

&

DOWN

Keys

Other Sterling Models

• Sterling 2000
  • Manual
• Sterling S1201-0
  • Manual
• Sterling SSE-2
  • Manual
• Sterling CFP05-30W
  • Manual
• Sterling 7210-B
  • Manual
• Sterling E045200
  • Manual
• Sterling BB122430
  • Manual
• Sterling 131
  • Manual
• Sterling STT 500
  • Manual
• Sterling C711FST
  • Manual