Stanton STR8-90 - Manual
Stanton STR8-90 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – ASSEMBLY; Cartridge; CONNECTIONS; needle to the vinyl.; The fourth and last adjustment is that of the tone arm height.
- Page 3 – PART NAMES & FUNCTIONS
- Page 4 – SPECIFICATIONS; TURNTABLE SECTION
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
ASSEMBLY Remove all the parts from the box. Please check to make sure the following items are included with the main unit in the carton: (1) Operating instructions (2) Platter (3) Slip mat (4) Counterweight (5) 45-rpm adapter (6) Headshell (7) AC cord (8) Connecting cord (9) Cartridge CONNECTIONS 1....
PART NAMES & FUNCTIONS 1) STROBE DOTS The dots around the edge of the platter are used in conjunction with the light located inside the motor ON/OFF switch. While the platter is in rotation, the dots help to indicate the speed of rotation. The speed is lower than the displayed speed (33,45,78) w...
SCRATCH PROTECTION The STR8-90 includes a pair of rubber protectors. These were designed to protect the turntable’s rounded aluminum edges from the mixer while scratching. When the turntables are placed sideways, the round edges of the turntable may come in contact with the mixer’s rack ears causing...
