St George 5566010 - User Manual
St George 5566010 Hob – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Ensure Suitability Of Location; Check Gas Type; Before Installation
- Page 3 – Clearances
- Page 4 – Installation Details; Lay The Rubber Seal; Attach The Duplicate Data Label
- Page 5 – Connect The Gas; Attach The Burner Head And Burner Cap
- Page 6 – Check For Leaks; Check Burner Operation; Check Igniter Operation
- Page 7 – Check Turn Down Settings And Adjust If Necessary; Gas Conversion; Change The Injectors
- Page 8 – Basic Servicing; Removing The Hob
Gas Cooktops
Installation Lea
fl
et
Safety Precautions
Before connecting to gas, ensure the cooktop is suited to the gas type required.
This cooktop shall not be installed on a boat or marine environment. This appliance shall not be
used as a space heater.
This appliance must be installed by a quali
fi
ed and competent person in accordance with the
gas installation code AS 5601, SAA Wiring Rules, as well as the requirements of all local statutory
and building authorities and regulations. The manufacturer does not accept any liability for any
damage or injury caused by improper installation.
Instruct The Customer
When satis
fi
ed that the cooktop has been installed and is operating correctly, instruct the
customer in its safe operation. Ensure the customer understands fully by having them operate the
cooktop.
This booklet must be left with the consumer.
Model No’s
5567800 5 burner gas cooktop
5566800 4 burner gas cooktop
5567100 5 burner gas cooktop with
fl
ame failure
5566010 4 burner gas cooktop with
fl
ame failure
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Ensure Suitability Of Location Before making any alterations to kitchen cabinetry, you should ensure that the proposed location for the cooktop is suitable: Electrical supply: there must be an earthed 240V 50 Hz 10Amp power socket within reach of the supplied electrical cable (approximately 850mm ...
3 Clearances Overhead Clearances Rangehoods and overhead exhaust fans must be installed with at least the clearances recommended by the manufacturer’s instructions, but in all cases the clearance from the top of the highest burner to a rangehood must be at least 650mm, and to an exhaust fan must be ...
4 Installation Details Lay The Rubber Seal Rubber sealing material has been provided to help seat the edges of the cooktop neatly onto the benchwork.The cooktop must not be bonded to the benchwork with any adhesive or permanent sealant, as this will prevent future servicing and maintenance work to b...
