SPRAYIT SPRAYIT SP-33500 - User Manual
SPRAYIT SPRAYIT SP-33500 Paint Sprayer – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Technical Data; Important Safety Instructions
- Page 3 – Instructions For Operation; Preparation; WARNING; Adjustment
- Page 4 – Operation; Maintenance; Storing; which will reduce spring tension on needle fluid tip.; MUST BE; well cleaned and lightly lubricated.
- Page 5 – Trouble shooting; Pattern is not
- Page 6 – Parts
- Page 8 – Warranty
- 1 -
Model No. SP-33500
Low Volume Low Pressure (LVLP) Gravity Feed Mini Spray Gun
Please read this Instruction Manual carefully and understand it completely, basic
precautions should be strictly followed to prevent the damage to the tool and injury
to the operator. Retain this manual for further reference.
CONTAIN:
Description
Specification and Technical Data
Important Safety Instruction
Instructions for Operation
Maintenance/Storing
Troubleshooting/Repairs
Parts List
Warranty
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
- 2 - Description The SPRAYIT SP-33500 LVLP Gravity Feed Mini Spray Gun can be used for variety of different applications such as Automotive, Industrial, Marine and Wood Working. The LVLP features require less air allowing you to use a smaller air compressor. Using the SPRAYIT SP-33500 reduces overs...
- 3 - 5.Use clean, dry and regulate compressed air rated at 2.0~3.5bar, never exceed maximum permissive operating pressure (see fig 4) 6.Never use homogenate hydrocarbon solvent, which can chemically react with aluminum and zinc parts and chemically compatible with aluminum and zinc pats. 7.Never po...
- 4 - Operation 1. Begin spraying. Always keep the gun at right angles to the work . 2. Keep the nozzle about 6 to 12 inches from the work surface. Grip the gun keeping perpendicular with spraying area then move it parallel for several times, Stopping gun movement in mid-stroke will cause a buildup ...