SPRAYIT SPRAYIT SP-33500 - Manuals

Page 2 - Technical Data; Important Safety Instructions

- 2 - Description The SPRAYIT SP-33500 LVLP Gravity Feed Mini Spray Gun can be used for variety of different applications such as Automotive, Industrial, Marine and Wood Working. The LVLP features require less air allowing you to use a smaller air compressor. Using the SPRAYIT SP-33500 reduces overs...

Page 3 - Instructions For Operation; Preparation; WARNING; Adjustment

- 3 - 5.Use clean, dry and regulate compressed air rated at 2.0~3.5bar, never exceed maximum permissive operating pressure (see fig 4) 6.Never use homogenate hydrocarbon solvent, which can chemically react with aluminum and zinc parts and chemically compatible with aluminum and zinc pats. 7.Never po...

Page 4 - Operation; Maintenance; Storing; which will reduce spring tension on needle fluid tip.; MUST BE; well cleaned and lightly lubricated.

- 4 - Operation 1. Begin spraying. Always keep the gun at right angles to the work . 2. Keep the nozzle about 6 to 12 inches from the work surface. Grip the gun keeping perpendicular with spraying area then move it parallel for several times, Stopping gun movement in mid-stroke will cause a buildup ...

Page 5 - Trouble shooting; Pattern is not

- 5 -  Trouble shooting Symptom Problems Solution Fluttering or spitting 1. Material level tool low. 2. Container tipped too far. 3. Loose fluid inlet connection. 4. Loose or damaged fluid tip/seat. 5. Dry or loose fluid needle packing nut. 6. Air vent clogged 1. Add material into container. 2. Hol...

Page 6 - Parts

Page 8 - Warranty

- 8 - Warranty Disclaimers and Limitations of Remedies This warranty gives you specific legal right, and you may also have other rights which may vary from State to State. Disclaimer of other Warranties To the fullest extent permitted by applicable law, this limited warranty is exclusive and express...

SPRAYIT SPRAYIT SP-33500 - Manuals

Manuals:

User Manual SPRAYIT SPRAYIT SP-33500

Summary