Speco Technologies VM15LCD - Manual

Page 2 - CONTENTS; ENVIRONMENT; care not to catch your feet on the cables.; POWER CORD; ● Do not modify or damage the cord. Damage to a power cord can cause; Table of Contents

Important Information Table of Contents ----------------------------------------------------------------------------- 2 Safety Information -------------------------------------------------------------------- ----- 3~5 Connection -----------------------------------------------------------------------...

Page 3 - ● If the power cord or plug is damaged, liquid has been spilled,

type plug has two blades and a third grounding prong. ● This monitor is designed to operate on 100-240V AC supply. Do not connect too many appliances to the same outlet as this can cause electric shock. MOUNTING ● Place the monitor on a secure table or have it properly mounted to the wall. Do not ha...

Page 4 - Connecting with PC, DVR at VGA; VGA; Connecting the Device with Video; Connection

1. Rear interface Explanation of connectors This section describes the jacks on the back panel of your monitor. There are several ways to connect devices. DC12V: Use only the power supply included with the monitor DVI: Connect with detachable DVI cable Remark: DVI cable is for Dual mode use only. VG...

Page 5 - Front Controls; SOURCE MENU - + POWER; and VGA; Controls

Connect the audio (red and white) cables to the AUDIO INPUT R and L jacks on the back of the monitor and to the Audio Output jacks on the DVR. Viewing the Picture From the Connected Device 1. Plug in the monitor and the device if they aren't already plugged in. 2. Turn on the monitor and the device ...

Page 6 - BASIC ON-SCREEN DISPLAY SETUP; PICTURE; Menu Setup

If you want to use an external input source, before to select the source, you need to connect the devices, otherwise when you select the source, the none or no signal will appear on the screen. Press the source button on the monitor or remote control and the menu will appear on the screen. Then pres...

Page 7 - and; FUNCTION

AUDIO BASS: Adjustment range:0-100 TREBLE: Adjustment range:0-100 BALANCE: Adjusts how much audio is sent to the left and right (-50 to +50). The intermediate value is 0. When indication value of balance increases toward +50, the volume of the right and left speaker increase and decrease. When the i...

Page 8 - or; NOISE REDUCTION

2. AV Input Mode PICTURE BRIGHTNESS: Adjusts the brightness of the picture. CONTRAST: Adjusts the difference between the light and dark areas of the picture. HUE: -50 to +50 (only available on AV PAL) SATURATION: 0-100 SHARPNESS: 0-100 COLOR TEMP: Press the “+” button to change the color intensity o...

Page 9 - HSTART

3. DVI Input mode PICTURE CONTRAST: Adjusts the difference between the light and dark areas of the picture. BRIGHTNESS: Adjusts the brightness of the picture. COLOR TEMP: Press + or － button to go into the Color Temp sub menu. Press the “+” button to change the color intensity of the temperature sel...

Speco Technologies VM15LCD - Manual

Table of Contents:

Summary

Other Speco Technologies Models