Speco Technologies VM22TSLCD - Manuals

Page 4 - Damage Requiring Service; – The unit should be serviced by qualified service personnel; Replacement Parts; may result in fire, electrical shock or other hazards.; Service

4 8. Damage Requiring Service – The unit should be serviced by qualified service personnel when:  The power cord or the plug has been damaged; or  Objects have fallen or liquid has been spilled into the unit; or the unit has been exposed to rain or water; or  The unit does not appear to operated ...

Page 5 - Touch Panel LCD: Key define

5 AUTO: Auto-optimize displaying picture under PC mode. Enter: This “ Auto” Button can be either “Enter” function in OSD Menu) MENU: OSD menu ON / OFF control. (EXIT Item) ADJUST: Increase or decrease the value on OSD menu. Up: Increase value or turn ON / OFF function. Down: Decrease value or turn O...

Page 6 - Touch Panel LCD: Connection define

6 1. VGA input 2. DVI input 3. PC audio in 4. VIDEO1 In: Video input Out: Video loop output S-VIDEO:Y/C input Audio: Audio input 5. VIDEO2 In: Video input Out: Video loop output Audio: Audio input 6. Port 1 / Port 2 (Touch setting) RS-485 connector Single mode – PTZ to port 1 / DVR to port 2 Matrix ...

Page 7 - Default:

7 Brightness: Adjusts the overall picture shade and brightness. Contrast: Permits adjustment of contrast between light and dark areas of the picture. Saturation: Adjusts the intensity of the color. Hue: To determine the lightness and colorfulness of the picture. Sharpness: Sets the desired sharpenin...

Page 11 - Touch Panel LCD: System Setting

11 Aspect Ratio: To change the display mode. Auto Source Detection: The monitor will auto detect the video source when power ON. Color Temperature: Selects color temperature of either 6500°K or 9300°K. Channel Display: This function is to allow the channel title to be displayed on the monitor. Langu...

Page 13 - Control mode

13 SINGLE mode: Only one control keyboard in the system. Single mode can be includes these systems below.  System A:  System B:  System C: RS-485(RJ-11) pin define: 3 + / 4 - Control mode P/T/Z Dome Touch panel LCD DVR Video RS-485 Video RS-485 Port 1 Port 2 Touch panel LCD DVR Video RS-485 Port ...

Page 15 - PTZ control with number table

15 PTZ control with number table Touch Icon Icon Mode Notice CAM: 000 Camera ID Call camera ID status DVR: 000 DVR ID Call DVR ID status MON: 000 Monitor ID Call monitor ID status AV 1 Channel 1 Video 1 input source display AV 2 Channel 2 Video 2 input source display ~ ID(number) ID + Set / ID + Cal...

Page 16 - PTZ Preset Function ID corresponding table

16 PTZ Preset Function ID corresponding table Preset ID ID + Call ID + Set count to 3 seconds 33 180 degree rotating 34 Speed dome return to zero 76 Start auto pan 92 Set line scan left stop 93 Set line scan right stop 95 Speed dome OSD Menu 96 Stop line scan 99 Start line scan Pan / Tile Control Mo...

Page 18 - Extension page

18 Extension page Touch Icon Icon Mode Notice CAM: 000 Camera ID Call camera ID status DVR: 000 DVR ID Call DVR ID status MON: 000 Monitor ID Call monitor ID status AV 1 Channel 1 Video 1 input source display AV 2 Channel 2 Video 2 input source display Up Direction button DVR OSD item select Zoom/En...

Page 19 - DVR control with number table

19 DVR control with number table Touch Icon Icon Mode Notice CAM: 000 Camera ID Call camera ID status DVR: 000 DVR ID Call DVR ID status MON: 000 Monitor ID Call monitor ID status AV 1 Channel 1 Video 1 input source display AV 2 Channel 2 Video 2 input source display ~ ID(number) ID + Full button to...