Speco Technologies VL7038IRVF - Manual

Page 2 - Contents

1 Contents ◑ Contents ...................................................... 1 ◑ Precautions ................................................. 2, 3 ◑ Safety Instructions ...................................... 4 ◑ Package Contents ....................................... 5 ◑ Camera Installation .........

Page 3 - Precautions

2 Precautions Do not install the camera inextreme temperature conditions. Do not touch the front lens of thecamera. Never keep the camera pointeddirectly at strong light. Do not expose the camera toradioactivity. Do not install the camera underunstable lighting conditions. Do not drop the camera or ...

Page 5 - Safety Instructions; Precautions for use; This camera should be installed by qualified personnel only

4 Safety Instructions Precautions for use Please handle this camera carefully : ◑ This camera should be installed by qualified personnel only ◑ There are no user serviceable parts inside ◑ Do not disassemble this camera other than to make initial adjustments ◑ Use a UL approved regulated 24 volt AC ...

Page 6 - Package Contents

5 Package Contents Please make sure that the following items are included in the Package: 1) VL7038IRVF, VL7039IRVF • 1 Video Test Connector, Power Jack • 1 3Axis Bracket Round Base Adaptor • 2 Wrenches • Set Screw - 4 Tapping Screws 4x25 - 4 Hexagon Socket Screws M5x15

Page 7 - CAMERA INSTALLATION

6 CAMERA INSTALLATION jvuulj{Gwv~ly Gjhis lG XUG~ oluG|zpunGXYG} vs {zGkjGOGG\WWGh PG YUG~ oluG|zpunGY[G} vs {zGh jGO[WG} Gh P ZUGjvuulj{G} pklvGjh is lG T jvuulj{GiujGjhislG{vG{olGiujGqhjrUG kjGXY} GwGz w GpGay lk j GaGORP ishjraOTP y lkORP wGz h...

Page 8 - Compatibility

7 CAMERA INSTALLATION Compatibility 1) VL7038IRVF, VL7039IRVF INTJBS INTCM

Page 10 - SPECIFICATIONS

9 VL7038IRVF 600TV LinesDC Auto Iris Varifocal Lens(2.8mm-12mm) True Day/Night Capability ICR-IR Cut Filter Removable850nm IR LEDs * 63pcs ■ SPECIFICATIONS Day/Night Weather-proof Bullet Camera DC Auto Iris Varifocal Lens(2.8mm-12mm) / IR LED Built-in 63pcs 1/3” Sony Super HAD ll CCDNTSC, PALNTSC=81...

Page 12 - CAMERA DIMENSION

11 CAMERA DIMENSION 1) VL7038IRVF / VL7039IRVF 5.31” 11.57” 11.22” 5.98” 4.76” 3.74” 3.42” 3.54” di a

Page 13 - General Features; Ultra High Sensitivity; SSNR; Disk Saving Effects; Controlled by OSD Menu

12 General Features ◑ Ultra High Sensitivity - The built-in high sensitivity COLOR CCD produces a clear image even in 0Lux(B/W, IR-LED ON)or lower illumination. ◑ 600TV Lines - By adopting a diagonal 6mm(1/3") 410,000 (NTSC) pixel, 470,000(PAL) pixel SONY CCD, the camera produces clear picture q...

Page 14 - OSD Control Button

13 OSD Control Button 1. Type A, Type B, Type C of OSD button could be used when it needs to OSD control. 2. Type D is extra Option (wired Remote controller) ▲ Up button: Moves the cursor upwards. Use this button to select an item or adjust the parameters. ▼ Down button: Moves the cursor downwards. ...

Page 16 - Exposure Setting

15 - FOCUS ADJ : To adjust the DC lens focus correctly, you must activate the Focus Settings mode under each lens menu. Activate the Focus Settings mode, adjust the lens focus, and then deactivate the settings mode. ☞ NOTE ■ If color rolling occurs when using a DC lens, set Shutter to Fixed (---). ☞...

Page 18 - SSNR Setting

17 ※ Select one of the following 5 modes, as appropriate for your purpose.◆ ATW : Select this when the color temperature is between 1,700˚K and 11,000˚K.◆ OUTDOOR : Select this when the color temperature is between 1,700˚K and 11,000˚K. (sodium light inclusion)◆ INDOOR : Select this when the color t...

Page 19 - Backlight Setting

18 ● Backlight Setting Unlike conventional cameras, the SIR-4160 is designed to deliver a distinctive subject and background at the same time, even when the subject is backlight, by using the features of the proprietary W-V DSP chip.1. When the SETUP menu screen is displayed, select 'BACKLIGHT' by u...

Page 20 - DNR3 Setting

19 BLC SETUP HLC SETUP Press Set to Return Press Set to Return LEVEL TOP BOTTOM LEFT RIGHT LEVEL LIMITS MASK COLOR MASK TONE TOP BOTTOM LEFT RIGHT LOW 38 109 54 121 MIDDLE NIGHT ONLY BLACK 1 5 120 5 172 ☞ NOTE ■ Because there can be a difference in the effectiveness of HLC according to the amount of...

Page 22 - Special Setting

21 ◆ AUTO : The mode is switched to 'Color' in a normal environment, but switches to 'B/W' mode when ambient illumination is low. To set up the switching time for AUTO mode, press the Function Setup switch. You can turn on or off the burst signal on B/W mode.- BURST MODE : You can turn on or off the...

Page 23 - Select a desired mode using the Function Setup switch.

22 2. Select a desired mode using the Function Setup switch. SPECIAL IMAGE SETUP 1.IMAGE ADJ 2.CAM TITLE 3.SYNC 4.MOTION DET 5.PRIVACY 6.DIS 7.COMM ADJ 8.LANGUAGE 9.RETRUN 1.V-REV 2.H-REV 3.D-ZOOM 4.FONT COLOR 5.SHARPNESS 6.MONITOR 7.RETURN OFF INT OFF OFF OFF ENGLISH OFF OFF WHITE ON LCD ◆ IMAGE AD...

Page 24 - SHOP

23 ☞ NOTE ■ When the V-REV or H-REV mode is enabled, the text on the screen does not flip.■ If you increase the SHARPNESS level too high, the picture may become distorted or noise may appear. ☞ NOTE ■ When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen even if you ente...

Page 25 - ◆ PRIVACY : Mask an area you want to hide on the screen.

24 ☞ NOTE ■ When using AC power at 60Hz(NTSC), 50Hz(PAL), frequency, you can use the L/L type synchronization.■ When the power is DC 12V, the SYNC menu is fixed to the ‘INT’ mode. ◆ MOTION DET :This product has a featurethat allows you to observe movement ofobjects in 8 different areas on the screen...

Page 27 - Exit Setting

26 ◆ LANGUAGE : You can select the menu language according to your requirements.◆ RETURN : Select this to save the SPECIAL menu settings and return to the MAIN SETUP menu. ● Exit Setting Select a desired EXIT mode using the Function Setup Switch.- SAVE : Save the current settings and exit the MAIN S...

Page 28 - Trouble Shooting; PROBLEM

27 ● Trouble Shooting PROBLEM Northing appears on the screen. ☞ Check the power cable, power supply output and video connection between the camera and monitor. ☞ Are the camera lens or the lens glass dirty? Clean the lens / glass with a soft clean cloth. ☞ Adjust the monitor controls, as required. ☞...

Page 30 - ▶ MEMO