Speco Technologies HTD8FFI/HTB11FFI/HT7248FFI - Manual

Page 3 - NOTE

Only use the camera under conditionswhere temperatures are between -10°C and +50°C. Be especially careful to provide ventilation when operating under high temperatures. This is one of the most important parts of the camera. Be careful not to leavefingerprints on the lens cover. It can cause malfunct...

Page 5 - Safety Instructions; Precautions for use; There are no user serviceable parts inside

4 Safety Instructions Precautions for use Please handle this camera carefully : ◑ ◑ There are no user serviceable parts inside ◑ Do not disassemble this camera other than to make initial adjustments ◑ Use a UL approved regulated 24 volt AC or 12 volt DC power supply ◑ rical shock ◑ Please insure tha...

Page 6 - Package Contents

Package Contents Please make sure that the following items are included in the Package: 1) HTD8FFI • 1 Video Test Connector, Power Jack • 2 Wrenches • Set Screw - 3 Tapping Screws 4x25 - 2 Hexagon Socket Screws M6x20 2) HTB11FFI • 1 Video Test Connector, Power Jack • 1 Bracket Base • 2 Wrenches • Se...

Page 8 - CAMERA INSTALLATION; Compatibility

CAMERA INSTALLATION Compatibility 1) HTD8FFI 2) HTB11FFI INTWM CVCJBB INTPM INTJBS JB03TG INTCM

Page 13 - Focus Free; SPECIFICATIONS; MODEL

650 Line Intensifier3 (Weatherproof Color Dome Camera) Focus free AI Motorized zoom Lens(2.8-10mm) HTD8FFI ■ Focus Free SPECIFICATIONS MODEL HTD8FFI 1/3” Sony Super HAD ll CCDNTSC, PALNTSC=811(H) * 508(V) / PAL=795(H) * 596(V)NTSC=768(H) * 494(V) / PAL=752(H) * 582(V)NTSC=15.734KHz(H) & 59.94Hz(...

Page 21 - Exposure Setting

20 3. THE Lens mode has sub menu items as listed below.- BRIGHTNESS : Adjusts the video brightness.- FOCUS ADJ : To adjust the DC lens focus correctly, you must activate the Focus Settings mode under each lens menu. Activate the Focus Settings mode, adjust the lens focus, and then deactivate the set...

Page 23 - WDR Setting

22 ※ Select one of the following 5 modes, as appropriate for your purpose.◆ ATW : Select this when the color temperature is between 1,700˚K and 11,000˚K.◆ OUTDOOR : Select this when the color temperature is between 1,700˚K and 11,000˚K. (sodium light inclusion)◆ INDOOR : Select this when the color t...

Page 24 - Backlight Setting; ◆ Select 'BLC' to adjust the area to be enhanced then adjust the level.

23 ● Backlight Setting Unlike conventional cameras, the 650Line Intensifier3™ Series are designed to deliver a distinctive subject and background at the same time, even when the subject is backlight, by using the features of the proprietary W-V DSP chip.1. When the SETUP menu screen is displayed, se...

Page 25 - SPECO DNR Setting

24 BLC SETUP HLC SETUP Press Set to Return Press Set to Return LEVEL TOP BOTTOM LEFT RIGHT LEVEL LIMITS MASK COLOR MASK TONE TOP BOTTOM LEFT RIGHT LOW 38 109 54 121 MIDDLE NIGHT ONLY BLACK 1 5 120 5 172 ☞ NOTE ■ Because there can be a difference in the effectiveness of HLC according to the amount of...

Page 27 - Special Setting

26 ◆ AUTO : The mode is switched to 'Color' in a normal environment, but switches to 'B/W' mode when ambient illumination is low. To set up the switching time for AUTO mode, press the Function Setup switch. You can turn on or off the burst signal on B/W mode.- BURST MODE : You can turn on or off the...

Page 28 - Select a desired mode using the Function Setup switch.

27 2. Select a desired mode using the Function Setup switch. SPECIAL IMAGE SETUP 1.IMAGE ADJ 2.MONITOR 3.CAM TITLE 4.SYNC 5.MOTION DET 6.PRIVACY 7.COMM ADJ 8.LANGUAGE 9.RETURN 1.V-REV 2.H-REV 3.D-ZOOM 4.DIS 5.FONT COLOR 6.SHARPNESS 7.RETURN OFF INT OFF OFF ENGLISH OFF OFF WHITE ON ◆ IMAGE ADJ. :1) W...

Page 29 - SHOP

28 ☞ NOTE ■ ■ If you increase the SHARPNESS level too high, the picture may become distorted or noise may appear. ☞ NOTE ■ When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen even if you enter one. ■ Only English is available in this mode. ■ If you move the cursor to C...

Page 31 - RETURN Setting; ◆ COMM ADJ

30 1) When the SPECIAL menu screen is displayed, press the Function Setup switch so that the arrow indicates 'PRIVACY'.2) Set up the mode using the Function Setup switch.- AREA : You can select up to 12 PRIVACY areas.- MODE : Determines whether to use the area selected in the AREA.- MASK COLOR : Det...

Page 32 - Trouble Shooting; PROBLEM

31 ● Trouble Shooting PROBLEM Northing appears on the screen. ☞ Check the power cable, power supply output and video connection between the camera and monitor. ☞ Are the camera lens or the lens glass dirty? Clean the lens / glass with a soft clean cloth. ☞ Adjust the monitor controls, as required. ☞...

Speco Technologies HTD8FFI/HTB11FFI/HT7248FFI - Manual

Table of Contents:

Summary

Other Speco Technologies Models