Page 2 - Precautions
1 Precautions z All the safety and operation instructions should be read before the DVR-16/IP is operated. z All the safety and operation instructions should be retained for future reference. z Comply with operating instruction and notice warning information. z Do not use strong or abrasive detergen...
Page 3 - CONTENT
2 CONTENT 1. Features .................................................................................................................................. 5 2. DVR-16/IP Application............................................................................................................ 5 3. Quick I...
Page 7 - Quick Installation Guide; Master
6 3. Quick Installation Guide The DVR-16/IP is equipped with a mobile rack, the HDD is hot-swappable. You can exchange the HDD when the HDD is full. The following figures illustrate how to install HDD into the removable cartridge. Step1: Pull the active-handle outwards and unlock with the miniature ...
Page 8 - Front Panel Introduction; The Buttons on the Front Panel; unit. Press one of these buttons to view the channel full screen.; GOTO
7 GOTO 1 Minute 302 Hour 203 Day 214 Month 115 Year 025 Goto Begin 6 Goto End 7 Exit 4. Front Panel Introduction The DVR-16/IP front panel controls enable you to perform preset and programmable functions. The figures below show the available buttons on the front panels. **DVR-16/IP starts detecting ...
Page 9 - MENU; In Live mode, press this button to enter automatic sequential; Pages; This item allows you to set each page’s dwell time.; Page Setup; ESC
8 Sequence_1 Set Up 1 Pages 16 11 Page 8 2 Mode 0 12 Page 9 3 Timer 5 13 Page 10 4 Page 1 14 Page 11 5 Page 2 15 Page 12 6 Page 3 16 Page 13 7 Page 4 17 Page 14 8 Page 5 18 Page 15 9 Page 6 19 Page 16 10 Page 7 20 Exit MENU Press this button to enter OSD setup menu (the LED will be lit). ENTER / ZOO...
Page 17 - DSCP Speed Dome
16 DSCP Speed Dome 1 RS-485 ID Setup XXX2 Zoom 3 Brightness 4 Set Preset Point XXX5 Enter Speed Dome Menu 6 Exit 6.4.1.1 Install This item allows you to install each channel on 1 Configuration Table1. Every channel is “installed” by default; you may uninstall any one of them manually. Once a channel...
Page 18 - PELCO Speed Dome; Each PELCO dome camera should have a ID individually.
17 CHIPER CRT.V9KRP 1 ID Setup 12 Zoom 3 Focus 4 Brightness 5 Set Preset Point 16 Goto Preset Point 7 Set Group Dwell 8 Go Preset Group 9 Stop Preset Group 10 Exit PELCO Speed Dome 1 Protocol Setup D_Type2 ID Setup 13 Zoom 4 Focus 5 Bfightness 6 Set Preset Point 7 Goto Preset Point 8 Enter Speed Dom...
Page 19 - Press Enter to start sequencing.; Stop Preset Group; Press Enter to stop sequencing.
18 Goto Preset Point Press right/ left direction button to select the number of the wanted preset point; then press Enter to go to the selected preset point. Set Group Dwell Press the right/ left direction button to choose a proper dwell time. Go Preset Group Press Enter to start sequencing. Stop Pr...
Page 20 - Situation 1
19 Camera_1 ! ” # $ % & ( ) * + , _ . /0 1 2 3 4 5 6 7 8 9 : : < > ?@ A B C D E F G H I J K L M N OP Q R S T U V W X Y Z [ \ ] ^ _‘ a b c d e f g h i j k l m n op q r s t u v w x y z { | } ~ Record 1 Day / Night 2 Weekend 3 REC Event Only OFF 4 REC Priority Mode 5 Circular Record OFF6 HDD ...
Page 21 - HDD
20 Day / Night 1 Day Start Time 08:002 Day Stop Time 18:003 Day REC PPS 604 Day REC Quality Super5 Night REC PPS 606 Night REC Quality Super7 Exit Weekend 1 Weekend Setting OFF2 Start FRI3 Stop MON4 REC PPS 605 REC Quality Super6 Exit Total Record Time (Hour) HDD size Quality: Ultra Quality: Super Q...
Page 22 - Recording Mode Normal Status (Non-recording Mode)
21 6.5.3 REC Event Only You are allowed to decide the situation DVR-16/IP starts recording. If you select “OFF”, then DVR-16/IP will remain in recording mode all the time. If you choose a time, then DVR-16/IP starts recording only when an event (both Alarm and Motion events) is triggered, and the ti...
Page 27 - This item shows you the HDD information.; HDD Size; It shows how much available space the current HDD leaves.; Total Rec Time
26 Others 1 RS-485 ID Setup 2242 RS- 485 Protocol 3 Software Information 4 HDD Information 5 Shutdown 6 Exit Software Information 1 CPU Filename D6SE01002 FPGA Filename FPGA0505 3 Date 2002/01/234 Video System NTSC5 DSP BD HW SK1V33025 DSP BD SW SK1V33006 Exit Shutdown 1 Shutdown: No 2 Shutdown: Yes...
Page 28 - item to play the CD.; Engineer Set Up
27 Save/ Load Default 1 Load Installer Setting 2 Save Installer Setting 3 Load Factory Setting 4 Load Factory Password 5 Exit Load Installer Setting 1 Save/ Load: No 2 Save/ Load: Yes 3 Exit Engineer Set Up 1 Change Password 99992 Covert Cam Visible Yes3 Playback Check OFF4 Language English5 Format ...
Page 30 - Windows Application Software; Connect the USB Mobile Rack to PC
29 Format Disk 1 Format Hard Disk 1 2 Format Hard Disk 2 3 Exit Exit 1 Set Up Data: Save 2 Set Up Data: Cancel 3 Exit 6.10.6 Language This item allows you to select your native language. 6.10.7 Format Hard Disk This item allows you to format the HDDs. Choose the HDD you want and then press ENTER to ...
Page 33 - DVR-16IP Remote Access of Video over the Web; Button Introduction; Set; ” button to complete the procedure.; Go; ” button to go to it.
32 8. DVR-16IP Remote Access of Video over the Web This section discusses the remote control ability of DVR-16/IP; it is an optional function. Users are able to access live and recoded video from remote site through Internet with Ethernet port connected. Key in the correct IP address, and then below...
Page 34 - Direction buttons; items of speed dome camera.
33 4. Direction buttons 4.1 If the “Pan/ Tilt” (check box) is enabled (default), these buttons are used to pan/ tilt the connected dome cameras. Choose a wanted camera through “P/ T/ Z ID” before you tried to pan/ tilt it. 4.2 If the “Pan/ Tilt” (check box) is disabled, these buttons can be used to ...
Page 40 - Model Name
39 RS-485 (RJ11) The default RS-485 port connector is RJ11 6P6C connector. RJ11 Cable 6P6C pin definition: Pin No. Definition Direction 1 - - 2 - Reserved 3 GND Ground 4 DA (D +) I/O 5 DB (D − ) I/O 6 - - 10. Specification Model Name DVR-16/IP Compression Method Wavelet Video System NTSC PAL Resolut...
Page 41 - Appendix 1: Hard Disk Error Message
40 Appendix 1: Hard Disk Error Message Some messages will be shown on the screen when the H.D.D. cannot operate. Message: HDD Detect Time Out Symptom : The system checks H.D.D. but gets no response over 30 seconds Possible reason : H.D.D. power on failure Countermeasure : 1). Wait for the DVR rese...
Page 42 - Appendix 2: Supported HDD; Brand; RPM; Notice
41 Appendix 2: Supported HDD The supported HDDs are listed as below: Brand Capacity Rotation Speed Part Number Maxtor 40GB 5400 RPM 4D040k2 Maxtor 80GB 5400 RPM 4D080H4 Maxtor 80GB 7200 RPM D740X-6L Maxtor 80GB 7200RPM 6Y080P0 Maxtor 120GB 7200RPM 6Y120P0 Maxtor 160GB 7200RPM 6Y160P0 Maxtor 200GB 72...
Page 44 - Appendix 4: Super MMX & Super MPX System Setup
43 Appendix 4: Super MMX & Super MPX System Setup 1. MMX (Multiplexer-Matrix) Purpose: by using the call monitor output of the DVR-16/IP/multiplexer array to mimic (or emulate) a small matrix system, each one of the camera can be selected to be displayed on the system monitor. Ex: when users wan...
Page 45 - Only 15 Dome can be connect
44 MPX NO MPX ID Camera ID Remark 1 E0H, 224 01H – 10H, 1~16 Channel 1~16 of MPX #1 2 E1H, 225 11H – 20H, 17~32 3 E2H, 226 21H – 30H, 33~48 4 E3H, 227 31H – 40H, 49~64 5 E4H, 228 41H – 50H, 65~80 6 E5H, 229 51H – 60H, 81~96 7 E6H, 230 61H – 70H, 97~112 8 E7H, 231 71H – 80H, 113~128 9 E8H, 232 81H – ...
Page 46 - must be set up as indicated in the above table.
45 Notice : (1) All Multiplexers shown in the diagram can be DVR-16/IPs. (2) Choose “Super MPX” from “System Monitor Setting” in keyboard’s “System Setting” (3) All the device must be connected to the same RS485 bus, the RS485 ID for each device must be set up as indicated in the above table.
