Speco Technologies CVC5815DNVW - Manual

- 5 - Package Contents Please make sure that the following items are included in the Package: 1) CVC5815DNV, CVC5815DNVW, CVC5915DNV, CVC5915DNVW • 1 Video Test Connector, Power Jack • 1 3Axis Bracket Round Base Adaptor • 2 Wrenches • Set Screw - 4 Tapping Screws 4x25 - 4 Hexagon Socket Screws M5x10

- 6 - CAMERA INSTALLATION jvuulj{Gwv~ly Gjhis lG XUG~ oluG|zpunGXYG} vs {zGkjGOŠ–•š›ˆ•›G–“›ˆŽŒG\WWG”h PG YUG~ oluG|zpunGY[G} vs {zGh jGO[WG} –“›Gh ”—šP ZUGjvuulj{G} pklvGjh is lG T jvuulj{GiujGjhislG{vG{olGiujGqhjrUG kjGXY} Gw–žŒ™Gzœ——“  w–žŒ™ Gp•—œ›Gay lk jŒ•›Œ™ GaGORP ishjraOTP y lkORP w–žŒ™Gzœ——...

- 7 - CAMERA INSTALLATION Compatibility 1) CVC5815DNV, CVC5815DNVW, CVC5915DNV, CVC5915DNVW CVCJBB INTJBS INTCM

- 9 - CVC5815DNVCVC5815DNVW 600TV LinesDC Auto Iris Varifocal Lens(2.8mm-12mm) True Day/Night Capability ICR-IR Cut Filter Removable850nm IR LEDs * 35pcsHeater 4EA ■ ■ IR LED's 35EA & Heater's 4EA SPECIFICATIONS Intense - IR Bullet Camera DC Auto Iris Varifocal Lens(2.8mm-12mm) / IR LED Built-in...

- 11 - CAMERA DIMENSION 1) CVC5815DNV, CVC5815DNVW, CVC5915DNV, CVC5915DNVW 3.70” 11.22” 5.90” 5.31” 10.62” 4.05” 3.54” 3.89” di a

- 12 - OSD Control Button 1. Type A, Type B, Type C of OSD button could be used when it needs to OSD control. 2. Type D is extra Option (wired Remote controller)

- 16 - Menu items can be selected by using the OSD buttons of the camera 1. Press the Set Up button. * The Set Up menu will be displayed on the monitor. 2. Move and select the required function using the Up and Down button. * Move the arrow indicator Up or Down to select the desired feature by press...

- 17 - 3. Change menu settings using the Left or Right button. * Available values or Status are displayed by pressing the Left or Right buttons. Press the button until desired value / status is displayed. 4. After Changing the setting move the arrow indicator to EXIT and press the SET button to EXIT...

- 21 - * HSBLE: HSBLC function is especially effective for reading car number plates at the night time. You can select and define the required observation area for the target object and ignore a strong light area. Press the "ENTER" button at the AREA menu, you can change the position as show...

- 22 - * D-WDR: This camera which is using 3D-DNR DSP provides intelligent light level control to overcome even strong backlight conditions. → OFF: D-WDR function does not operate. When there are simultaneous bright & dark image area WDR makes them both distinct and can be selected as OUTDOOR an...

- 23 - White Balance The White Balance function is used to control the “on-screen” colors. 1. Move the arrow indicator to WHITE BAL on the SETUP menu screen using the Up and Down button. 2. Select the desired mode by using the Left or Right button. * There are three user selectable White Balance set...

- 27 - Special When the SETUP menu screen is displayed, select SPECIAL using the Up and Down buttons. Select one of the mode using the Up and Down button. 1. CAM TITLE : When input, the Camera ID is displayed on the monitor. 1-1) Move the arrow indicator to CAMERA ID using the Up or Down button on t...

- 31 - 2-2) D - ZOOM: Digital zoom available, range x1 ~ x32. PAN : The pan range can be controlled between -10 ~ + 100 TILT : The tilt range can be controlled between -10 ~ + 100 * V-FLIP : Flip the image vertically on the screen. * ROTATE : Flip the horizontal image vertically on the screen. * OFF...

- 35 - ADJUST 1. When the SETUP menu screen is displayed, select ADJUST using the Up and Down buttons. SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.DAY / NIGHT 5.3DNR 6.SPECIAL 7.ADJUST 8.RESET 9.EXIT DC ATW AUTO ON 2. Select the desired mode by using Up or Down button. SHARPNESS : Improving image clarity....

- 36 - RESET Resets the camera settings to the factory defaults. EXIT Press the SET button in the EXIT menu to save the current settings and exit the SETUP menu. SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.DAY / NIGHT 5.3DNR 6.SPECIAL 7.ADJUST 8.RESET 9.EXIT DC ATW AUTO ON RESET FACTORYRETURN RET SETUP 1....

- 37 - Trouble Shooting PROBLEM Northing appears on the screen. ☞ Check the power cable, power supply output and video connection between the camera and monitor. ☞ Are the camera lens or the lens glass dirty? Clean the lens / glass with a soft clean cloth. ☞ Adjust the monitor controls, as required....