Speco Technologies CVC230HZ - Manual

Page 5 - Back; ) Video Output Jack

1) Camera mounting screw hole 2) Camera mounting screw hole Back 3) Key Buttons 4) Power LED 5) Video Output Jack 6) RS-485 9) Power Input Terminal 8) Communication Control Connector 7) External Control Connector

Page 6 - Illuminates when power is supplied.; Video Output Jack; Used to connect an external video monitor in jack.; Top Mounting Bracket Screw Hole; Used to fix tripod mounting bracket on top of the camera.; Tripod Mounting Hole

: To Move the arrow indicator to up. : To Move the arrow indicator to down. : To Move the arrow indicator to left. : To Move the arrow indicator to right. Main setup menu can be navigated using these buttons. SET : To access the main setup menu. UP (WIDE button) Down (TELE button) LEFT ( F-NEAR butt...

Page 7 - Power supply terminal; + Connect cables with the unit powered down.

7. External Control connector Relaters to the motion detection output signal. Zoom and focus functions can be controlled using external signals. 8. Communication Control Connector Used to connect the Remote Controller (Option). 9. Power Input Terminal Power supply terminal + Connection methods may v...

Page 8 - ) Connecting to Power

2) Connecting to Power Each model has a different power input specification. Please check the model type and standard power requirement before connecting to power. + Communication Control Connector Pin Description. Number Name Number Name 1 Right 4 Auto Focus 2 Left 5 Down 3 Setup 6 Up

Page 9 - MAIN SETUP MENU

MAIN SETUP MENU RESET EXIT MOTION DET OFF FOCUS MODE ZOOM SPEED DISP ZOOM MAG LENS INIT ZOOM TRK D-ZOOM ZOOM POS INIT END EXPOSURE BRIGHTNESS AGC END IRIS SSNR SHUTTER SENS-UP WHITE BALANCE ATW(OUTDOOR) MANUAL AWC  SET BACKLIGHT OFF HIGH MIDDLE LOW CAM TITLE OFF ON SPECIAL USER PRESET DAY/NIGHT COM...

Page 10 - Use the six buttons on back of the camera; Select the desired feature using the UP or DOWN button.

Up button SET button LEFT button RIGHT button DOWN button Use the six buttons on back of the camera 1. Press the SET button to access the main setup mode. - Main setup menu is displayed on the monitor screen MAIN SETUP CAM TITLE WHITE BAL BACKLIGHT MOTION DET FOCUS EXPOSURE SPECIAL RESET EXIT OFF AT...

Page 12 - When completed, move the cursor to ‘END’ and press SET button.

4. You can enter up to 20 characters. 1) Move the cursor to the character entry field using the LEFT or RIGHT button. 2) Use UP, DOWN, LEFT, and RIGHT buttons to select a desired character. CAM TITLE SETUP ABCDEFGHIJKLMNO PQRSTUVWXYZabcd e f g h i j k l m n o p q r s T u v w x y z 0 1 2 3 4 5 6 7 89...

Page 13 - The three white balance control modes are as follows :

Your camera provides three ‘WHITE BAL’ control modes for your choosing in Adjusting the white balance. 1. Press the SET button to access the main setup menu and move the indicator to ‘WHITE BAL’ using the UP or DOWN button. 2. Set ‘WHITE BAL’ using the LEFT or RIGHT button. MAIN SETUP CAM TITLE WHIT...

Page 15 - MODE: You can select the most suitable zoom mode. Move the arrow

+ Please press the SETUP button. - OFF : MOTION DETECTION mode is cancelled. - ON : Any motion in the selected areas is observed. + Please press the SETUP button. - OFF : MOTION DETECTION mode is cancelled. - ON : Any motion in the selected areas is observed. + Please select the area you wish to obs...

Page 16 - + MANUAL: Select ‘MANUAL’ and press the SET button to confirm. Increase

FOCUS SETUP MODE ZOOM TRK ZOOM SPEED D-ZOOM DISP ZOOM MAG ONE-PUSH ON FAST OFF ON ▶ ◀ ┘ + ONE PUSH: Focus is automatically adjusted just once, after zoom position is changed. Select ‘ONE PUSH’ and press the SET button to confirm. Increase or decrease optical zoom (ZOOM) or digital zoom (D-ZOOM) posi...

Page 17 - Set ‘ZOOM LIMIT’ to the desired level using the LEFT or RIGHT button.

FOCUS SETUP MODE ZOOM TRK ZOOM SPEED D-ZOOM DISP ZOOM MAG ONE-PUSH ON FAST ON ON ▶ ◀ ┘  D-ZOOM : Configure magnification limit from x2~x10 using this feature. Po sition the indicator over ‘D-ZOOM’ using the UP or DOWN button. Set ‘D-ZOOM’ to ‘ON’ and press the SET button to confirm. FOCUS SETUP MOD...

Page 21 - AUTO

 SENS-UP : This feature ensures clear images at night or under low lighting conditions. 1. Position the indicator over ‘SENS-UP’ using the UP or DOWN button. 2. Set ‘SENS-UP’ to the desired mode using the LEFT or RIGHT button. EXPOSURE SETUP BRIGHTNESS IRIS SHUTTER AGC SSNR SENS-UP END 50 ………… AUTO...

Page 24 - DIS : The DIS mode can compensate for vibration of the camera.

-   GROUP SEL -   MASK COLOR -   AREA SEL -   AREA MODE -   TOP -   BOTTOM -   LEFT -   RIGHT : Choose up to eight groups. Each group can consist of four mask areas. : Adjust desired mask color level. : Configure eight mask areas. : Mask area display. : To move the mask area up. : To move the mask a...

Page 26 - Includes image quality or special function factors.

 IMAGE ADJ : -   FREEZE -   H-REV -   V-REV -   SHARPNESS -   COLOR : Use this feature to freeze capture an image. : Use this feature to horizontally inverse the screen. : Use this feature to vertically inverse the screen. : Increasing this value sharpens object edges. Too high of a setting, howeve...

Speco Technologies CVC230HZ - Manual

Table of Contents:

Summary

Other Speco Technologies Models