SOUNDSTREAM Class A 5.2 102 - Manual
SOUNDSTREAM Class A 5.2 102 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Table of Contents
- Page 3 – power; SLEEPING BEAUTY
- Page 5 – Hawkins Bass Control; The Boost control; Adjustment
- Page 6 – INSTALLATION STEP 2; SELECTING THE SPEAKER OUTPUT MODE
- Page 7 – INSTALLATION STEP; use; BREAKERS AND FUSES; replace the; SAMPLE WIRING DIAGRAM; INSTALLATION STEP 4; of; POWER
- Page 8 – INSTALLATION STEP 5; TRIDENT PROTECTION CIRCUITRY; the problem before blowing multiple fuses!; TROUBLESHOOTING
SERVICE
Your
Soundstream
amplifier is protected
by a limited
warranty.
Please read the enclosed warranty card for details.
Stereo
1 Stereo
112 Stereo
Stereo
Maximum
POWER
(8 Bridged)
(4 Bridged)
(2 Bridged)
(1 Bridged)
Bridged)
Rated
(12.6 Vdc)
(14.4 Vdc)
(14.4 Vdc)
(14.4
(14.4 Vdc)
output
Class A
x 2
x2
250W x 2
x2
250W x 2
5.2
x 1)
x 1)
x 1)
x l )
x 1)
500
Watts
Class A
x2
250W x 2
500W x2
10.2
x 1)
x 1)
x 1)
x 1)
x 1)
1000 Watts
T H D
%
Signal to Noise
Frequency Response
20
Hz to 20
0.5
Stereo Separation
Damping
Input Sensitivity
300
to 5.0 Volts
Input Impedance
1 Ok
Ohms
Hawkins Bass Control
Sub Sonic Filter: No boost,
High Pass filter from
13 to 30
Hz.
Hawkins Bass Control: 0
to
Boost; Boost and Sub Sonic filter,
variable from 30 to 70 Hz.
Dimensions (W x D x H)
Class A 5.2: 13.0” X 9.8” X 2.25”
Class A 10.2:
15.0” X 9.8” X
2.25”
SOUNDSTREAM
T
E
H
N
L
E
SOUNDSTREAM TECHNOLOGIES
120 Blue Ravine Road
California 95630 USA
ph 916.351.1288
l
fax 916.351.0414
Class A
5.2
Power Amplifiers
Owner’s Manual
and
Installation Guide
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Table of Contents You now own a Soundstream CLASS A amplifier, the product of an uncompromising design and engineering philosophy. Your Soundstream CLASS A amplifier will outperform any other amplifier in the world. To Maximize the performance of your system, we recommend that you thor- oughly acqua...
Ultra Low-Impedance Output Capablility: The 0.2 and 5.2 are designed for optimal performance into loads as low as or ohm stereo (1 or ohm mono). This new proprietary power sup- ply topology eliminates “power sags” during low frequency reproductionby rapidly increasing the duty cycle, stabilizing the...
Hawkins Bass Control and Use HAWKINS BOOST Hz SUBSONIC 13-30 Hz FIG. 1 BASS CONTROL Hawkins Bass Control (parametric) is a unique subwoofer control circuit included with the Soundstream Class A 10.2 and 5.2 am- plifiers. It is capable of removing subsonic energyin program material while boosting sub...
