Soundcore A3399Z11 - User Manual

Page 3 - At a Glance

01 EN At a Glance 8 2 1 3 4 5 6 7 9 10 11 12 13 14 15 1. PartyCast2. Volume up3. Play/Pause4. Volume down5. Light mode6. BassUp7. Power8. Bluetooth9. Mic reverb10. Mic gain11. Mic volume12. AUX13. USB-A for USB playback and charging out14. DC for charging in15. Microphone

Page 4 - Charging; Charge your Speaker; Check Battery Level

02 EN Charging Charge your Speaker Fully charge this speaker before the first use to prolong the lifespan of the built-in battery. DC 1.5m/4.9ft Battery level < 25 % Battery level 25 % - 50 % Battery level 51 % - 75 % Battery level 76 % - 99 %Fully charged Check Battery Level Battery level < 1...

Page 5 - Charge your USB Devices; ON; OFF; Press once

03 EN Charge your USB Devices Charge your USB devices through the USB port. USB Battery Capacity: 4900mAh/7.2V Powering On/Off ON OFF >2s ×1 OFF ON Press once Power on Steady whitePress and hold for 2 seconds Power off Light off

Page 6 - Using Your Speaker; Bluetooth Mode

04 EN This speaker will power off automatically after 20 minutes if no device is connected. Using Your Speaker Bluetooth Mode With this speaker, you can enjoy music through your Bluetooth-enabled devices. 1 x1 Soundcore Rave Party 2 2 Soundcore Rave Party 2 PAIRING CONNECTED Press Enter Bluetooth pa...

Page 7 - Enter TWS pairing mode

05 EN TWS (True Wireless Stereo) Mode Two identical Rave Party 2 speakers can pair with each other for stereo sound. Both speakers can play the same audio (one as L channel and the other as R channel). 1. Connect either speaker with your Bluetooth device. 2. On both speakers, press and hold the Blue...

Page 8 - PartyCast Mode

06 EN PartyCast Mode You can wirelessly connect up to 100 identical Rave Party 2 speakers together. 1. Connect a Rave Party 2 speaker with your smartphone or tablet as Speaker 1. 2. Press the PartyCast button once on Speaker 1 and all the additional speakers to enter the pairing mode. When successfu...

Page 9 - Button Controls; Press or press and hold

07 EN MIC/USB/AUX Mode Insert a microphone, a USB storage device, or a 3.5 mm audio cable. USB MIC AUX When using AUX mode, control audio playback via the connected device. Button Controls Press once Play/Pause Press twice Next track Press three times Previous track Press or press and hold Adjust vo...

Page 10 - Reset; least 4 seconds to reset the speaker.; Light Effects; Download the Soundcore app to check all available light modes.

08 EN Reset Press and hold the Bluetooth button and volume up button simultaneously for at least 4 seconds to reset the speaker. RESET >4s Light Effects Download the Soundcore app to check all available light modes. • Campfire Vibes • Romantic Stroll • Neon Night • Flow • Spring Break • Party • E...

Page 11 - Soundcore App; Product information:; Normal EQ mode with well-balanced sound.

09 EN Soundcore App Download the Soundcore app to enhance your experience. Product information: Check the product name and software version, or read the user manual. Firmware update: You will be informed once a new version of firmware is detected when you connect the speaker with the app. Battery st...

Page 12 - Specifications; Specifications are subject to change without notice.

10 EN Specifications Specifications are subject to change without notice. DC power input 12 V 2 A Battery capacity 4900 mAh/7.2 V USB output 5 V 2.1 A Audio output power 120 W Charging time 5.5 hours Playtime (varies by volume level and music content) Up to 16 hours Waterproof level IPX4 Bluetooth v...

Soundcore A3399Z11 - User Manual

Table of Contents:

Summary

Other Soundcore Portable Speakers Models