Page 3 - About This Manual; About area codes
3 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB02REG_STR-DN610-U2.fm masterpage: Right STR-DN610 4-167-824- 13 (1) Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indi...
Page 4 - On Copyrights
4 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB02REG_STR-DN610-U2.fm4-167-824- 13 (1) masterpage: Left STR-DN610 4-167-824- 13 (1) This receiver incorporates Dolby* Digital and Pro Logic Surround and the DTS** Digital Surround System.* Manufactured under license from Dolby Laboratories. Dol...
Page 5 - Table of Contents
5 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB01COV_STR-DN610-U2TOC.fm masterpage: Right STR-DN610 4-167-824- 13 (1) Table of Contents About This Manual ........................................ 3Supplied accessories ...................................... 6Description and location of parts....
Page 6 - Additional Information; Supplied accessories
6 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB01COV_STR-DN610-U2TOC.fm masterpage: Left STR-DN610 4-167-824- 13 (1) Additional Information Glossary ....................................................... 71Precautions .................................................. 73Troubleshooting ......
Page 7 - Description and location of parts; Remote sensor; White lamp; Front panel; qa
7 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB03DES_STR-DN610-U2.fm masterpage: Right STR-DN610 4-167-824- 13 (1) Description and location of parts A ? / 1 (on/standby) (page 31) B Remote sensor Receives signals from remote commander. C White lamp Lights up when the receiver is on.Lights o...
Page 8 - Indicators on the display; qs; Indicator and explanation
8 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB03DES_STR-DN610-U2.fm masterpage: Left STR-DN610 4-167-824- 13 (1) Indicators on the display LFE NEO : 6 L C SL S PL II x HDMI - E S DTS 9 6 / 24 SLEEP D . RANGE ST RDS COAX OPT LPCM SW SB SBL R SR SBR D EX qs qa q; 1 2 3 4 5 6 9 7 8 Indicator ...
Page 10 - Rear panel; Audio signal section; Video signal section; DIGITAL INPUT/OUTPUT
10 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB03DES_STR-DN610-U2.fm masterpage: Left STR-DN610 4-167-824- 13 (1) * You can watch the selected input image when you connect the HDMI TV OUT or MONITOR OUT jack to a TV (page 20, 23). Rear panel L R L R R L FRONT A CENTER SURROUND ANTENNA TV O...
Page 11 - You can use the supplied remote; Remote commander
11 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB03DES_STR-DN610-U2.fm masterpage: Right STR-DN610 4-167-824- 13 (1) You can use the supplied remote RM-AAU073 (Models of area code CA2 only) or RM-AAU075 (Models of area code CEK, ECE only) to operate the receiver and to control the Sony audio...
Page 12 - Notes on using the SHIFT (; Press and hold SHIFT (; To control the receiver; Name and function
12 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB03DES_STR-DN610-U2.fm masterpage: Left STR-DN610 4-167-824- 13 (1) Notes on using the SHIFT ( O ) and TV ( P ) button SHIFT ( O ) button Press and hold SHIFT ( O ), then press the button with pink printing that you want to use.Example: Press a...
Page 13 - To control a Sony TV; ) and then press the
13 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB03DES_STR-DN610-U2.fm masterpage: Right STR-DN610 4-167-824- 13 (1) a) The following buttons have tactile dots: – RM-AAU073: 5/VIDEO 1, AUDIO, N and TV CH +/SOUND FIELD + – RM-AAU075: 5/VIDEO 1, , N and PROG +/SOUND FIELD +/ c Use the tactile ...
Page 14 - AUDIO
14 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB03DES_STR-DN610-U2.fm masterpage: Left STR-DN610 4-167-824- 13 (1) a) The following buttons have tactile dots. – RM-AAU073: 5/VIDEO 1, AUDIO, N and TV CH +/SOUND FIELD + – RM-AAU075: 5/VIDEO 1, , N and PROG +/SOUND FIELD +/ c Use the tactile d...
Page 15 - To control other Sony components; Notes
15 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB03DES_STR-DN610-U2.fm masterpage: Right STR-DN610 4-167-824- 13 (1) To control other Sony components a) The following buttons have tactile dots. – RM-AAU073: 5/VIDEO 1, AUDIO, N and TV CH +/SOUND FIELD + – RM-AAU075: 5/VIDEO 1, , N and PROG +/...
Page 16 - : Installing the speakers; Center speaker; Connections
16 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB04CON_STR-DN610-U2.fm masterpage: Left STR-DN610 4-167-824- 13 (1) Inserting batteries into the remote Insert two R6 (size-AA) batteries in the RM-AAU073 (Models of area code CA2 only) or RM-AAU075 (Models of area code CEK, ECE only) Remote Co...
Page 18 - : Connecting the speakers
18 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB04CON_STR-DN610-U2.fm masterpage: Left STR-DN610 4-167-824- 13 (1) 2: Connecting the speakers Before connecting the cords, be sure to disconnect the AC power cord (mains lead). 10 mm (13/32") L R R L TV OUT 1 N I 2 N I HDMI ASSIGNABLE (INP...
Page 19 - Bi-amplifier connection
19 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB04CON_STR-DN610-U2.fm masterpage: Right STR-DN610 4-167-824- 13 (1) Connecti ons a) Notes on the SPEAKERS SURROUND BACK/BI-AMP/FRONT B terminals connection. – If you connect only one surround back speaker, connect it to the L of this terminals...
Page 23 - b: Connecting the video components; HDMI features; • A digital audio signals transmitted by HDMI; Components to be connected; Component Page
23 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB04CON_STR-DN610-U2.fm masterpage: Right STR-DN610 4-167-824- 13 (1) Connecti ons 4b: Connecting the video components Connect your video components according to the table below. * We recommend that you connect your video components via HDMI con...
Page 24 - We recommend that you use a Sony HDMI cable.
24 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB04CON_STR-DN610-U2.fm masterpage: Left STR-DN610 4-167-824- 13 (1) * For details on the audio connection of the TV to the receiver, see page 20. Notes • Be sure to change the initial setting of the HDMI 1-3 input button on the remote so that y...
Page 26 - Connecting a Blu-ray disc player
26 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB04CON_STR-DN610-U2.fm masterpage: Left STR-DN610 4-167-824- 13 (1) The following illustration shows how to connect a Blu-ray disc player. A Coaxial digital cord (not supplied) B Optical digital cord (not supplied) C Audio cord (not supplied) D...
Page 27 - Connecting a DVD player, DVD recorder
27 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB04CON_STR-DN610-U2.fm masterpage: Right STR-DN610 4-167-824- 13 (1) Connecti ons The following illustration shows how to connect a DVD player or DVD recorder. A Coaxial digital cord (not supplied) B Optical digital cord (not supplied) C Compon...
Page 28 - Note; Connecting a satellite tuner, cable TV tuner
28 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB04CON_STR-DN610-U2.fm masterpage: Left STR-DN610 4-167-824- 13 (1) The following illustration shows how to connect a satellite tuner or cable TV tuner. A Audio cord (not supplied) B Optical digital cord (not supplied) C Component video cord (n...
Page 31 - Initializing the receiver; Press; To turn off the speaker output; Preparing the Receiver; To select the front speakers
31 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB04CON_STR-DN610-U2.fm masterpage: Right STR-DN610 4-167-824- 13 (1) Pre p aring the R eceive r Initializing the receiver Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedur...
Page 33 - “START” appears on the display.; Setting up the Auto Calibration; Performing Auto Calibration
33 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB04CON_STR-DN610-U2.fm masterpage: Right STR-DN610 4-167-824- 13 (1) Pre p aring the R eceive r 1 Connect the supplied optimizer microphone to the AUTO CAL MIC jack. 2 Set up the optimizer microphone. Place the optimizer microphone at your list...
Page 34 - When you have finished; To cancel Auto Calibration; When error codes appear; Measurement for; Error and warning codes; Error code
34 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB04CON_STR-DN610-U2.fm masterpage: Left STR-DN610 4-167-824- 13 (1) The table below shows the display when measurement starts. * The corresponding speaker indicator lights up in the display during measurement. 4 Measurement ends. “COMPLETE” app...
Page 35 - When warning codes appear
35 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB04CON_STR-DN610-U2.fm masterpage: Right STR-DN610 4-167-824- 13 (1) Pre p aring the R eceive r When warning codes appear During Auto Calibration, the warning code provides information on the measurement result. The warning code will appear on ...
Page 36 - Tips; • The speaker cords may not be connected
36 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB04CON_STR-DN610-U2.fm masterpage: Left STR-DN610 4-167-824- 13 (1) Adjusting the speaker levels (TEST TONE) You can adjust the speaker levels while listening to the test tone from your listening position. 1 Press AMP MENU. 2 Press V / v repeat...
Page 37 - Playback; Turn on the receiver.; You can also use INPUT SELECTOR; Play back the source.; To activate the muting function; MUTING on the receiver again.; Basic Operations
37 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB05BAS_STR-DN610-U2.fm masterpage: Right STR-DN610 4-167-824- 13 (1) B a si c Op era tio ns Playback 1 Turn on the connected component. 2 Turn on the receiver. 3 Press one of the input buttons to select the component you want. You can also use ...
Page 38 - FM and AM band; Naming inputs
38 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB05BAS_STR-DN610-U2.fm masterpage: Left STR-DN610 4-167-824- 13 (1) You can enter a name of up to 8 characters for inputs (except TUNER) and display it on the receiver’s display.This is convenient for labeling the jacks with the names of the co...
Page 39 - Using the Sleep Timer; The display changes as follows:; OFF; Recording; Recording onto a CD-R
39 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB05BAS_STR-DN610-U2.fm masterpage: Right STR-DN610 4-167-824- 13 (1) B a si c Op era tio ns Using the Sleep Timer You can set the receiver to turn off automatically at a specified time. 1 Press AMP MENU. 2 Press V / v repeatedly to select “SYST...
Page 40 - Listening to FM/AM radio; Tip; Tuner Operations
40 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB05BAS_STR-DN610-U2.fm masterpage: Left STR-DN610 4-167-824- 13 (1) 1 Press one of the input buttons to select the playback component. You can also use INPUT SELECTOR +/– on the receiver. 2 Prepare the playback component for playing. For exampl...
Page 41 - If you cannot tune in a station
41 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB05BAS_STR-DN610-U2.fm masterpage: Right STR-DN610 4-167-824- 13 (1) T u n e r Op era tio ns 1 Press TUNER repeatedly to select the FM or AM band. 2 Press TUNING + or TUNING –. Press TUNING + to scan from low to high; press TUNING – to scan fro...
Page 42 - Changing the AM tuning scale
42 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB05BAS_STR-DN610-U2.fm masterpage: Left STR-DN610 4-167-824- 13 (1) (Models of area code CA2 only) You can change the AM tuning scale to either 9 kHz or 10 kHz using the buttons on the receiver. 1 Press ?/1 to turn off the receiver. 2 While hol...
Page 43 - Tuning to preset stations
43 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB05BAS_STR-DN610-U2.fm masterpage: Right STR-DN610 4-167-824- 13 (1) T u n e r Op era tio ns 4 Press and hold SHIFT, then press the numeric buttons to select a preset number. You can also press PRESET + or PRESET – to select a preset number. 5 ...
Page 44 - Selecting the sound field; Receiving RDS broadcasts
44 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB06ENJ_STR-DN610-U2.fm masterpage: Left STR-DN610 4-167-824- 13 (1) Using the Radio Data System (RDS) (Models of area code CEK, ECE only) This receiver allows you to use Radio Data System (RDS), which enables radio stations to send additional i...
Page 45 - DCS; Movie mode
45 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB06ENJ_STR-DN610-U2.fm masterpage: Right STR-DN610 4-167-824- 13 (1) Enjo ying Surr ound Sound Notes • When headphones are connected, “HP DIR” appears on the display. • You cannot select Analog Direct when you select DVD, DMPORT and HDMI 1-3 as...
Page 46 - If you connect a subwoofer; Notes on sound fields; Music mode
46 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB06ENJ_STR-DN610-U2.fm masterpage: Left STR-DN610 4-167-824- 13 (1) You can take advantage of surround sound simply by selecting one of the receiver’s preprogrammed sound fields. They bring the exciting and powerful sound of concert halls into ...
Page 50 - What is “BRAVIA” Sync?; • If your TV is not compatible with the; “BRAVIA” Sync Features
50 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB07BRA_STR-DN610-U2.fm masterpage: Left STR-DN610 4-167-824- 13 (1) What is “BRAVIA” Sync? “BRAVIA” Sync is compatible with Sony TV, Blu-ray Disc/DVD player, AV amplifier, etc., that is equipped with the Control for HDMI function.By connecting ...
Page 51 - Control for HDMI function is turned on.; Switches to appropriate HDMI input; Receiver and TV
51 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB07BRA_STR-DN610-U2.fm masterpage: Right STR-DN610 4-167-824- 13 (1) “BRA VIA” Sy nc Features If your TV is not compatible with the “Control for HDMI-Easy Setting” function 1 Perform the steps given in “If your TV is compatible with the “Contro...
Page 52 - • When you adjust the TV volume, the; • Turns on
52 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB07BRA_STR-DN610-U2.fm masterpage: Left STR-DN610 4-167-824- 13 (1) Enjoying the TV sound from the speakers connected to the receiver (System Audio Control) You can enjoy the TV sound from the speakers connected to the receiver by a simple oper...
Page 53 - Press and hold TV, then press
53 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB07BRA_STR-DN610-U2.fm masterpage: Right STR-DN610 4-167-824- 13 (1) “BRA VIA” Sy nc Features Turning off the receiver with the TV (System Power Off) When you turn the TV off by using the POWER button on the TV’s remote, the receiver and the co...
Page 55 - Audio input modes; Advanced Operations
55 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB08ADV_STR-DN610-U2.fm masterpage: Right STR-DN610 4-167-824- 13 (1) A d v a n c ed Op e ratio n s Switching between digital and analog audio (INPUT MODE) When you connect components to both digital and analog input jacks on the receiver, you c...
Page 56 - Assigning input jacks; Assignable input jacks
56 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB08ADV_STR-DN610-U2.fm masterpage: Left STR-DN610 4-167-824- 13 (1) Assigning input jacks * Initial setting Notes • When you assign the digital audio input, the INPUT MODE setting may change automatically (page 55). • You cannot reassign more t...
Page 58 - Using the setting menu; The setting is entered automatically.; To exit the menu
58 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB08ADV_STR-DN610-U2.fm masterpage: Left STR-DN610 4-167-824- 13 (1) Notes • Set “SB ASGN” to “BI-AMP” before you perform Auto Calibration. • If you set “SB ASGN” to “BI-AMP”, the speaker level and distance settings of the surround back speakers...
Page 59 - Overview of the menus; Menu
59 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB08ADV_STR-DN610-U2.fm masterpage: Right STR-DN610 4-167-824- 13 (1) A d v a n c ed Op e ratio n s The following options are available in each menu. For details, see the page in the parentheses. Overview of the menus Menu [Display] Parameters [...
Page 62 - Adjusting the speaker level; The dynamic range is not compressed.; AUTO CAL menu
62 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB08ADV_STR-DN610-U2.fm masterpage: Left STR-DN610 4-167-824- 13 (1) You can perform automatic calibration to get proper sound balance in your room.For details, see “Calibrating the appropriate speaker settings automatically (AUTO CALIBRATION)” ...
Page 63 - PATTERN; SPEAKER menu; Speaker
63 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB08ADV_STR-DN610-U2.fm masterpage: Right STR-DN610 4-167-824- 13 (1) A d v a n c ed Op e ratio n s You can set the size and distance of the speakers connected to this receiver. x PATTERN Lets you set the number of speakers connected to this rec...
Page 64 - FRT SIZE; CNT SIZE; • LARGE; SUR SIZE; • SMALL
64 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB08ADV_STR-DN610-U2.fm masterpage: Left STR-DN610 4-167-824- 13 (1) x FRT SIZE • LARGE If you connect large speakers that will effectively reproduce bass frequencies, select “LARGE”. Normally, select “LARGE”. However, if you have selected a spe...
Page 65 - SB ASGN; • SPK B; The distance is displayed in meters.
65 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB08ADV_STR-DN610-U2.fm masterpage: Right STR-DN610 4-167-824- 13 (1) A d v a n c ed Op e ratio n s x SB ASGN • SPK B If you connect an additional front speaker system to the SPEAKERS SURROUND BACK/BI-AMP/FRONT B terminals, select “SPK B”. • BI-...
Page 66 - EFFECT; FM MODE; • STEREO; NAME IN; The audio output is not delayed.; SURROUND menu
66 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB08ADV_STR-DN610-U2.fm masterpage: Left STR-DN610 4-167-824- 13 (1) You can select the sound field you want for your listening pleasure. x S.F. SELCT Lets you select the sound field you want. For details, see “Enjoying Surround Sound” (page 44)...
Page 67 - DUAL; • MAIN; • AUTO; VIDEO menu
67 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB08ADV_STR-DN610-U2.fm masterpage: Right STR-DN610 4-167-824- 13 (1) A d v a n c ed Op e ratio n s x DUAL Lets you select the language you want to listen to during digital broadcast. This feature only functions for Dolby Digital sources.• MAIN/...
Page 68 - • OFF; SW LEVEL; Automatically sets the level to 0 dB or; • ARC OFF
68 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB08ADV_STR-DN610-U2.fm masterpage: Left STR-DN610 4-167-824- 13 (1) • OFF The receiver does not output HDMI signals when in the standby mode. Turn on the receiver to enjoy the connected component’s source on the TV. This setting saves power in ...
Page 69 - mote; You can customize the settings of the receiver.; DIMMER; • STBY OFF; With the AV; Example: With the AV; SYSTEM menu
69 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB09REM_STR-DN610-U2.fm masterpage: Right STR-DN610 4-167-824- 13 (1) Using the R e mote You can customize the settings of the receiver. x DIMMER Lets you adjust the brightness of the display in 3 levels. x SLEEP Lets you set the Sleep Timer on ...
Page 71 - rmation; Glossary; Cinema Studio EX
71 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB09REM_STR-DN610-U2.fm masterpage: Right STR-DN610 4-167-824- 13 (1) Additional Inf o rmation Glossary x Cinema Studio EX A surround sound mode that can be regarded as the compilation of Digital Cinema Sound technology, delivers the sound of a ...
Page 73 - Precautions; On safety; • Before operating the receiver, check that the; On heat buildup
73 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB09REM_STR-DN610-U2.fm masterpage: Right STR-DN610 4-167-824- 13 (1) Additional Inf o rmation x x.v.Color (x.v.Colour) x.v.Color (x.v.Colour) is a more familiar term for the xvYCC standard proposed by Sony, and is a trademark of Sony. xvYCC is ...
Page 74 - Troubleshooting; Audio
74 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB09REM_STR-DN610-U2.fm masterpage: Left STR-DN610 4-167-824- 13 (1) On placement • Place the receiver in a location with adequate ventilation to prevent heat buildup and prolong the life of the receiver. • Do not place the receiver near heat so...
Page 76 - Video
76 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB09REM_STR-DN610-U2.fm masterpage: Left STR-DN610 4-167-824- 13 (1) There is no sound from the subwoofer. • Check that the subwoofer is connected correctly and securely. • Make sure you have turned on your subwoofer. • Depending on the selected...
Page 77 - Tuner
77 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB09REM_STR-DN610-U2.fm masterpage: Right STR-DN610 4-167-824- 13 (1) Additional Inf o rmation The FM reception is poor. • Use a 75-ohm coaxial cable (not supplied) to connect the receiver to an outdoor FM antenna (aerial) as shown below. If you...
Page 78 - The remote does not function.
78 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB09REM_STR-DN610-U2.fm masterpage: Left STR-DN610 4-167-824- 13 (1) The Control for HDMI function does not work. • Check the HDMI connection (page 23).• Make sure “CTRL.HDMI” is set to “CTRL ON” in the HDMI menu. • Make sure the connected compo...
Page 79 - Specifications; Amplifier section; Error messages; To clear
79 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB09REM_STR-DN610-U2.fm masterpage: Right STR-DN610 4-167-824- 13 (1) Additional Inf o rmation If there is a malfunction, the display shows a message. You can check the condition of the system by the message. See the following table to solve the...
Page 80 - in the certain printed wiring boards.
80 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB09REM_STR-DN610-U2.fm masterpage: Left STR-DN610 4-167-824- 13 (1) Digital (Optical) S/N: 100 dB (A, 20 kHz LPF) Output (Analog) AUDIO OUT Voltage: 500 mV/ 10 kohms SUBWOOFER Voltage: 2 V/1 kohm Equalizer Gain levels ±6 dB, 1 dB step 3) INPUT ...
Page 81 - Index; Numerics
81 GB D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB01COV_STR-DN610-U2IX.fm masterpage: Right STR-DN610 4-167-824- 13 (1) Additional Inf o rmation Index Numerics 2 channel 445.1 channel 167.1 channel 16 A A.F.D. mode 45Analog Direct 44Audio Return Channel (ARC) 54 AUTO CALIBRATION 32 B BI-AMP 6...