Sony RDP-X50IP - Manual

RDP-X50iP_4-199-673-32(2)_CEF/CEK/AU6

WARNING

To reduce the risk of fire or electric shock, do not

expose this apparatus to rain or moisture.

To reduce the risk of fire, do not cover the

ventilation of

the apparatus with newspapers, tablecloths, curtains, etc.

And do not place lighted candles on the apparatus.
To reduce the risk of fire or electric shock, do not expose

this apparatus to dripping or splashing, and do not place

objects filled with liquids, such as vases, on the

apparatus.
Do not install the appliance in a confined space, such as

a bookcase or built-in cabinet.
Do not expose the batteries (battery pack or batteries

installed) to excessive heat such as sunshine, fire or the

like for a long time.
As the main plug is used to disconnect the unit from the

mains, connect the unit to an easily accessible AC outlet.

Should you notice an abnormality in the unit, disconnect

the main plug from the AC outlet immediately.
The unit is not disconnected from the AC power source

(mains) as long as it is connected to the wall outlet, even

if the unit itself has been turned off.
The nameplate and important information concerning

safety are located on the bottom exterior of main unit

and on the surface of AC power adaptor.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same type.

Notice for customers: the following information is

only applicable to equipment sold in countries

applying EU directives

The manufacturer of this product is Sony Corporation,

1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The

Authorized Representative for EMC and product safety is

Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327

Stuttgart, Germany. For any service or guarantee matters

please refer to the addresses given in separate service or

guarantee documents.
The validity of the CE marking is restricted to only those

countries where it is legally enforced, mainly in the

countries EEA (European Economic Area).

Features

Compatible with iPod and iPhone

MEGA BASS

Audio in function

Wireless remote commander supplied









Precautions

Operate the unit on the power source specified in

“Specifications.”

To disconnect the AC power cord (mains lead), pull it

out by the plug, not the cord.

Since a strong magnet is used for the speaker, keep

personal credit cards using magnetic coding or spring-

wound watches away from the unit to prevent possible

damage from the magnet.

Do not leave the unit in a location near a heat source

such as a radiator or airduct, or in a place subject to

direct sunlight, excessive dust, mechanical vibration, or

shock.

Allow adequate air circulation to prevent internal heat

build-up. Do not place the unit on a surface (a rug, a

blanket, etc.) or near materials (a curtain) which might

block the ventilation holes.

Should any solid object or liquid fall into the unit,

unplug the unit and have it checked by qualified

personnel before operating it any further.

To clean the casing, use a soft cloth dampened with a

mild detergent solution.

If the unit is placed near a CRT-based TV or projector,

ghosting may occur on its screen. In this case, move the

unit away.

NOTES ON LITHIUM BATTERY

Wipe the battery with a dry cloth to assure a good

contact.

Be sure to observe the correct polarity when installing

the battery.

Do not hold the battery with metallic tweezers,

otherwise a short-circuit may occur.

Disposal of Old Electrical & Electronic

Equipment (Applicable in the European

Union and other European countries

with separate collection systems)

This symbol on the product or on its packaging indicates

that this product shall not be treated as household waste.

Instead it shall be handed over to the applicable

collection point for the recycling of electrical and

electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by

inappropriate waste handling of this product. The

recycling of materials will help to conserve natural

resources. For more detailed information about recycling

of this product, please contact your local Civic Office,

your household waste disposal service or the shop where

you purchased the product.

Applicable accessory: Remote Commander.

Disposal of waste batteries

(applicable in the European Union

and other European countries with

separate collection systems)

This symbol on the battery or on the packaging indicates

that the battery provided with this product shall not be

treated as household waste.

On certain batteries this symbol might be used in

combination with a chemical symbol. The chemical

symbols for mercury (Hg) or lead (Pb) are added if the

battery contains more than 0.0005% mercury or 0.004%

lead.

By ensuring these batteries are disposed of correctly, you

will help prevent potentially negative consequences for

the environment and human health which could

otherwise be caused by inappropriate waste handling of

the battery. The recycling of the materials will help to

conserve natural resources.
In case of products that for safety, performance or data

integrity reasons require a permanent connection with

an incorporated battery, this battery should be replaced

by qualified service staff only.

To ensure that the battery will be treated properly, hand

over the product at end-of-life to the applicable

collection point for the recycling of electrical and

electronic equipment.
For all other batteries, please view the section on how to

remove the battery from the product safely. Hand the

battery over to the applicable collection point for the

recycling of waste batteries.
For more detailed information about recycling of this

product or battery, please contact your local Civic Office,

your household waste disposal service or the shop where

you purchased the product.
If you have any questions or problems concerning your

unit, please consult your nearest Sony dealer.























Power sources

Preparing a power source

1

Connect the AC power cord (supplied) to the AC

power adaptor (supplied).

2

Connect the AC power adaptor to the

DC IN 20V

jack on the back of this unit firmly and plug it into a

wall outlet.

AUDIO IN

DC IN 20V

AC power

adaptor

AC power

cord

To wall

outlet

Note on the AC power adaptor

Use the Sony supplied AC power adaptor only. The polarity of the

plugs of other manufactures may be different. Failure to use the

supplied AC power adaptor may cause the unit to malfunction.

Preparing the remote

commander

Before using the remote commander for the first time,

remove the insulation film.

To know when to replace the battery

With normal use, the battery (CR2025) should last for

about 6 months. When the remote commander no longer

operates the unit, replace the battery with a new one.

with the + side

facing up



Notes

Do not attempt to charge the battery.

If you are not going to use the remote commander for a long time,

remove the battery to avoid any damage that may be caused by

leakage and corrosion.






4-199-673-

32

(2)

Personal Audio

Docking System

©2010 Sony Corporation

Printed in China

RDP-X50iP

Operating Instructions