Snapper YZ16385BVE, YZ16385BVE - Manual
Snapper YZ16385BVE, YZ16385BVE – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – IMPORTANT SAFETY INSTRUCTIONS; PROTECTION FOR CHILDREN
- Page 3 – PREPARATION
- Page 4 – MAINTENANCE
- Page 5 – TABLE OF CONTENTS
- Page 6 – Section 1 - FAMILIARIZATION
- Page 7 – Section 2 - OPERATING INSTRUCTIONS
- Page 8 – WARNING
- Page 9 – BLADE; DO NOT park machine on slopes.
- Page 10 – SAFETY INTERLOCK SYSTEM CHECKS; ENGINE MUST NOT START IF:; ENGINE MUST BEGIN TO STOP IF:
- Page 11 – Section 3 - MAINTENANCE; SINGLE BLADE DECK
- Page 12 – Checking Mower Belt Tension
- Page 14 – Mower Deck Linkage - Lubrication
- Page 15 – Filter
- Page 16 – NEUTRAL POSITION ADJUSTMENTS; FRONT OF MOWER
- Page 18 – BELT REPLACEMENTS; MOWER
- Page 20 – FRONT OR REAR VIEW OF DECK
- Page 21 – 8” DECK SHOWN
- Page 22 – MOWER BLADE REPLACEMENT
- Page 23 – BLADE REPLACEMENT CHART
- Page 24 – TESTING; Battery Condition Chart; State of Charge
- Page 25 – TROUBLESHOOTING; PROBLEM
- Page 27 – SERVICE SCHEDULE; MAINTENANCE/REPLACEMENT PARTS
- Page 28 – YEAR LIMITED WARRANTY
- Page 29 – PRIMARY MAINTENANCE
- Page 33 – SNAPPER PRODUCT REGISTRATION FORM; IMPORTANT: KEEP THIS INFORMATION FOR YOUR PERSONAL RECORDS; Eastern Standard Time
- Page 34 – NOTES
Safety Instructions & Operator’s Manual for
SCRAMBLER
HYDRO DRIVE
SERIES 5
MODELS
YZ16335BVE
YZ16385BVE
MODEL NUMBER EXPLANATION
Y Z 16
33 5 B
V
E
MODEL DESIGNATION
ENGINE OPTIONS
DRIVE SYSTEM TYPE
ENGINE TYPE
ENGINE HORSE POWER
SERIES DESIGNATION
CUTTING WIDTH
Y – SCRAMBLER
Z – Zero Turning Radius
16 – 16.0 HP Engine
33 - 33” Cutting Deck
38 - 38” Cutting Deck
5 - Series Designation
B - Briggs Engine
V – Over Head Valve
E - Electric Start
Thank you for buying a SNAPPER Product! Before operating your SCRAMBLER, read this manual carefully
and pay particular attention to the “IMPORTANT SAFETY INSTRUCTIONS” on Pages 2 - 4. Remember that all
power equipment can be dangerous if used improperly. Also keep in mind that SAFETY requires careful use in
accordance with the operating instructions and common sense!
COPYRIGHT © 2003
SNAPPER PRODUCTS INC.
ALL RIGHTS RESERVED
MANUAL No. 7-5557 (I.R. 8/06/03)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 IMPORTANT SAFETY INSTRUCTIONS WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons. Th...
3 IMPORTANT SAFETY INSTRUCTIONS PREPARATION (Continued From Previous Page) 7. Keep people and pets out of mowing area. Immediately STOP blades, STOP engine, and STOP machine if anyone enters the area. 8. Check shields, deflectors, switches, blade controls and other safety devices frequently for prop...
4 IMPORTANT SAFETY INSTRUCTIONS MAINTENANCE 1. DO NOT store machine or fuel container inside where fumes may reach an open flame, spark or pilot light such as in a water heater, furnace, clothes dryer or other gas appliance. Allow engine to cool before storing machine in an enclosure. Store fuel con...
