SMC Networks SMCGS24C-Smart - Manual

SMC Networks SMCGS24C-Smart

SMC Networks SMCGS24C-Smart – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
35 Page 35
36 Page 36
37 Page 37
38 Page 38
39 Page 39
40 Page 40
41 Page 41
42 Page 42
43 Page 43
44 Page 44
45 Page 45
46 Page 46
47 Page 47
48 Page 48
49 Page 49
50 Page 50
51 Page 51
52 Page 52
53 Page 53
54 Page 54
55 Page 55
56 Page 56
57 Page 57
58 Page 58
59 Page 59
60 Page 60
61 Page 61
62 Page 62
63 Page 63
64 Page 64
65 Page 65
66 Page 66
67 Page 67
68 Page 68
69 Page 69
70 Page 70
71 Page 71
72 Page 72
73 Page 73
74 Page 74
75 Page 75
76 Page 76
77 Page 77
78 Page 78
79 Page 79
80 Page 80
81 Page 81
82 Page 82
83 Page 83
84 Page 84
85 Page 85
86 Page 86
87 Page 87
88 Page 88
89 Page 89
90 Page 90
91 Page 91
92 Page 92
93 Page 93
94 Page 94
95 Page 95
96 Page 96
97 Page 97
98 Page 98
99 Page 99
100 Page 100
101 Page 101
102 Page 102
103 Page 103
104 Page 104
105 Page 105
106 Page 106
107 Page 107
108 Page 108
109 Page 109
110 Page 110
111 Page 111
112 Page 112
113 Page 113
114 Page 114
115 Page 115
116 Page 116
117 Page 117
118 Page 118
Page: / 118

Table of Contents:

  • Page 3 – From SMC’s EZ line of cost-effective workgroup LAN solutions
  • Page 6 – ii
  • Page 7 – iii; OMPLIANCES; Industry Canada - Class A
  • Page 8 – iv
  • Page 9 – Safety Compliance; Warning: Fiber Optic Port Safety; Power Cord Safety
  • Page 11 – vii
  • Page 12 – viii
  • Page 13 – ix; Warnings and Cautionary Messages
  • Page 14 – End of Product Life Span; Purpose
  • Page 15 – xi; ABLE
  • Page 16 – xii
  • Page 17 – xiii; Glossary
  • Page 18 – xiv
  • Page 19 – xv; ABLES
  • Page 20 – xvi; IGURES
  • Page 21 – xvii
  • Page 22 – xviii
  • Page 23 – EZ S; WITCH; Overview; Figure 1-1 Front Panel
  • Page 24 – Switch Architecture
  • Page 25 – Description of Hardware; SFP Slots
  • Page 26 – Figure 1-3 Port LEDs and Power LED
  • Page 27 – Power Supply Socket; Figure 1-4 Power Supply Socket; Features and Benefits; Connectivity
  • Page 28 – Expandability
  • Page 29 – Introduction to Switching
  • Page 30 – Application Examples; Collapsed Backbone; Figure 2-1 Collapsed Backbone
  • Page 31 – Central Wiring Closet; Figure 2-2 Central Wiring Closet
  • Page 32 – Remote Connections with Fiber Cable; Figure 2-3 Remote Connections with Fiber Cable
  • Page 33 – Making VLAN Connections; Figure 2-4 Making VLAN Connections
  • Page 34 – Application Notes; link should not exceed:
  • Page 35 – Selecting a Site; - be at the center of all the devices you want to link and near a power
  • Page 36 – Ethernet Cabling; • Protection from radio frequency interference emissions
  • Page 37 – Equipment Checklist; Package Contents; Mounting
  • Page 38 – Rack Mounting; • Temperature: Since the temperature within a rack assembly may be
  • Page 39 – Bracket Mounting Kit.; Figure 3-2 Attaching the Brackets
  • Page 40 – If installing a single switch only, turn to “Connecting to a Power; Desktop or Shelf Mounting; Attach the four adhesive feet to the bottom of the first switch.; Figure 3-4 Attaching the Adhesive Feet; at the end of this chapter.
  • Page 41 – SFP T; Installing an SFP Transceiver; Figure 3-5 Inserting an SFP Transceiver into a Slot; To install an SFP transceiver, do the following:
  • Page 42 – Connecting to a Power Source; To connect a device to a power source:; Figure 3-6 Power Socket; For international use, you may need to change the AC line
  • Page 43 – Connecting Network Devices; Cabling Guidelines; See Appendix B “Cables” for further information on cabling.; Caution; : Do not plug a phone jack connector into an RJ-45
  • Page 44 – Connecting to PCs, Servers, Hubs and Switches; Attach one end of a twisted-pair cable segment to the device’s RJ-45; Figure 4-1 Making Twisted-Pair Connections
  • Page 45 – Network Wiring Connections; the other end to the patch panel.; Figure 4-2 Wiring Closet Connections
  • Page 46 – Fiber Optic SFP Devices; Remove and keep the LC port’s rubber cover. When not connected to
  • Page 47 – SFP D; Connect one end of the cable to the LC port on the switch and the; Figure 4-3 Making Connections to SFP Transceivers; As a connection is made, check the Link LED on the switch
  • Page 48 – Connectivity Rules; 000BASE-T Cable Requirements
  • Page 49 – 00 Mbps Fast Ethernet Collision Domain
  • Page 50 – Cable Labeling and Connection Records
  • Page 51 – Using the Web Interface
  • Page 52 – Navigating the Web Browser Interface; Home Page; Figure 5-1 Home Page
  • Page 53 – Configuration Options; Figure 5-2 Front Panel Indicators; Table 5-1 Web Page Configuration Buttons
  • Page 54 – Main Menu; Table 5-2 Switch Main Menu
  • Page 55 – Menu
  • Page 56 – Web Configuration; Displaying Status Overview; Field Attributes; System Information
  • Page 57 – Trunk Information
  • Page 58 – Web
  • Page 59 – Showing Port Statistics; Table 5-3 Port Statistics
  • Page 62 – Displaying System Name; You can easily identify the system by displaying the device name.; Switch Name; – Name assigned to the switch system.
  • Page 63 – Setting the Switch’s IP Address; – Address of the VLAN interface that is allowed
  • Page 64 – Manual Configuration; – Click System, LAN Settings. Enter the IP address, subnet mask and; Figure 5-6 LAN Settings; Configuring the Logon Password; – Specifies the user password.
  • Page 65 – – Click System, Password. To change the password for the; Figure 5-7 Password Settings; Tools; Restore to Factory Defaults
  • Page 67 – Figure 5-10 Upload/Download configuration
  • Page 68 – Register Product; – Click System, Register Product. Click the Register Now button to; Figure 5-12 Register Product; Static MAC; Add Static MAC
  • Page 69 – Static MAC Address Configuration; This table shows the stored static MAC entries in MAC table.; click ADD button to add a new static MAC address.; Figure 5-13 Static MAC Address Configuration; Counter Config; Please also note the following restrictions.
  • Page 71 – Port Configuration; – Allows you to manually set the port speed and duplex; • Flow Control; – Allows flow control to be enabled or disabled. When the; • Trunk; – Indicates if a port is a member of a trunk.
  • Page 72 – Configuring Rate Limits
  • Page 73 – – Click PORTS, Rate Limiting. This page enables you to set the rate; Figure 5-16 Rate Limiting
  • Page 74 – Storm Control; – List the type of traffic which can be rate limited, including ICMP,; • Enable Storm Control; – Click the check box to enable storm control
  • Page 75 – – Click PORTS, Storm Control. This page enables you to set the; Figure 5-17 Port Broadcast Control; Port Mirroring; Ports to Mirror; • Port to Mirror to; – The port that will “duplicate” or “mirror” the traffic
  • Page 76 – Cable Diagnostic; – Cable diagnostics is performed on a per-port
  • Page 77 – – Shows the cable length, operating conditions and isolates; Trunks Membership; – The front panel port number.
  • Page 78 – – These columns correspond to the eight trunks that are; – Click TRUNKS, Membership. To assign a port to a trunk, click the; Figure 5-20 Trunk Membership; Trunk Configuration; – Indicates trunk identification.
  • Page 79 – Trunk Rate Limit
  • Page 80 – VLAN Settings; Introduction to VLANs
  • Page 81 – – The port-number of the port or the ID of a trunk. This; • VLAN Awareness; – VLAN aware ports will strip the VLAN tag from; • QinQ; – A QinQ enabled port will accept packets up to 1526 bytes in
  • Page 82 – QinQ “customer” ports are those ports that are connected to; • Packet Type; – Sets the interface to accept all frame types, including; PVID; – VLAN ID assigned to untagged frames received on the
  • Page 83 – – Click VLANS, VLAN Port Configuration. Fill in the required; Figure 5-23 VLAN Settings; QOS Settings; QoS Disabled; QoS is turned off and all packets have equal priority.
  • Page 84 – DSCP
  • Page 85 – DSCP to configure the related parameters.; Security; - Select the IP filter mode for this port.
  • Page 87 – Port Security; - Set the maximum of; No Limit; - No limitation on the number of dynamcally learned MAC
  • Page 89 – ACL
  • Page 90 – IGMP Snoop; IGMP Snooping Configuration
  • Page 93 – Diagnosing Switch Indicators; Table A-1 Troubleshooting Chart
  • Page 94 – Power and Cooling Problems
  • Page 95 – Twisted-Pair Cable and Pin Assignments
  • Page 96 – Pin
  • Page 97 – Straight-Through Wiring
  • Page 98 – Crossover Wiring; Figure B-3 Crossover Wiring
  • Page 100 – Adjusting Existing Category 5 Cabling to Run 1000BASE-T; e or Category 6 cables.; Fiber Standards; Horizontal
  • Page 101 – Physical Characteristics; K MAC address entries, 1K static MAC addresses
  • Page 102 – Switch Features; Wire speed; Management Features; Web Interface
  • Page 103 – Software Loading; Standards; Ethernet, Fast Ethernet, Gigabit Ethernet; Compliances; CE Mark; Warranty; Limited Lifetime
  • Page 105 – Product Number
  • Page 107 – LOSSARY
  • Page 109 – Full Duplex; Institute of Electrical and Electronic Engineers.; LAN Segment; Separate LAN or collision domain.
  • Page 110 – A group of interconnected computers and support devices.
  • Page 111 – Ports that are on separate collision domains or LAN segments.
  • Page 113 – Numerics; NDEX
Loading the manual

USER GUIDE

EZ Switch

TM

10/100/1000

24-Port Smart Switch

SMCGS24C-Smart

ta

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 3 - From SMC’s EZ line of cost-effective workgroup LAN solutions

20 MasonIrvine, CA 92618Phone: (949) 679-8000 EZ Switch 10/100/1000User Guide From SMC’s EZ line of cost-effective workgroup LAN solutions March 2008 Pub. # 149100009500H E032008-AP-R04

Page 6 - ii

L IMITED W ARRANTY ii WARRANTIES EXCLUSIVE: IF AN SMC PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY SHALL BE REPAIR OR REPLACEMENT OF THE PRODUCT IN QUESTION, AT SMC’S OPTION. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES OR CONDITI...

Page 7 - iii; OMPLIANCES; Industry Canada - Class A

iii C OMPLIANCES FCC - Class A This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial...

Other SMC Networks Models

All SMC Networks Other