Page 2 - Copyright; specifications at any time without notice.; Trademarks; registered trademarks of their respective holders.
Copyright Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or ...
Page 3 - Compliances; • Reorient the receiving antenna
Compliances FCC - Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gener...
Page 4 - EC Conformance Declaration – Class B; SMC contact for these products in Europe is:; Important Safety Notices
EC Conformance Declaration – Class B SMC contact for these products in Europe is: SMC Networks Europe, Edificio Conata II Calle Fructuos Gelabert 6-8, 2o, 4a 08970 – Sant Joan Despi Barcelona, Spain This equipment complies with the requirements relating to electromagnetic compatibility, EN 55022/A1 ...
Page 5 - to be sure you have received the following components:
1 | System Requirements • Internet access from your local telephone company or Internet Service Provider (ISP) using a DSL modem, cable modem, Dial-Up modem, or ISDN modem • A PC using a fixed IP address or dynamic IP address assigned via DHCP, as well as a Gateway server address and DNS server addr...
Page 6 - | Functions and Features
3 | Functions and Features Broadband Modem and NAT Router Connects multiple computers to a broadband (cable or DSL) modem, and/or Ethernet router to access the Internet. 10/100 Mbps Ethernet Interface Provides a 10/100 Base-TX interface to connect to a DSL or cable modem for broadband Internet acces...
Page 9 - Windows NT
you have not previously installed TCP/IP protocols on your client PCs, refer to the following section. 6.1 | Installing TCP/IP Windows 95/98/Me 1. Click Start/Settings/Control Panel. 2. Double-click the Network icon and select the Configuration tab in the Network window. 3. Click the Add button. 4. ...
Page 12 - | Configuring Your Broadband VPN Router; Internet Explorer 5 or above (For Windows)
7 | Configuring Your Broadband VPN Router Before you attempt to log into the web-based Administration, please verify the following. 1. Your browser is configured properly (see below). 2. Disable any firewall or security software that may be running. 3. Confirm that you have a good link LED where you...
Page 13 - password is; smcadmin; button. If you typed the password correctly, the; Time Zone; to set the time zone. Select your time zone from the drop-down list.; Broadband Type
Note that there are two different Web user interfaces, one for general users and one for the system administrator. To log on as an administrator, enter the system password (default password is smcadmin ) and click the LOGIN button. If you typed the password correctly, the left panel of the Web user ...
Page 16 - password and apply the changes.
PPTP Point-to-Point Tunneling Protocol is a common connection method used for xDSL connections in Europe. It can be used to join different physical networks using the Internet as an intermediary. If you have been provided with the information as shown on the screen, enter the assigned IP address, su...
Page 19 - information is also used for your network logging.
7.4 | Advanced Setup – SYSTEM Time Zone Use the section below to configure the Barricade's system time. Select your timezone and configure the daylight savings option based on your location. This information is used for the time/date parental rules you can configure with the Barricade's Advanced Fir...
Page 21 - Syslog Server; radio button for Enable is checked and then submit the changes.
Syslog Server The Syslog Server tool will automatically download the Barricade log to the server IP address specified by the user. Enter the Server LAN IP Address and select the Enable radio button to enable this function. The broadband router is also able to send the log files to a specific email a...
Page 22 - Dynamic IP
7.5 | Advanced Setup - WAN Dynamic IP The cable modem option allows you to configure a host name and MAC Address. The Host Name is optional, but may be required by some ISPs. The default MAC address is set to the WAN’s physical interface on the Router. Use this address when registering for Internet ...
Page 23 - PPPoE; connection as soon as you attempt to access the Internet again.
PPPoE Enter the PPPoE User Name and Password assigned by your Service Provider. The Service Name is normally optional, but may be required by some service providers. Leave the Maximum Transmission Unit (MTU) at the default value unless you have a particular reason to change it. Enter a Maximum Idle ...
Page 29 - you can try setting your computer as a DMZ host.
For example, if you have an FTP server (port 21) at 192.168.123.1, a Web server (port 80) at 192.168.123.2, and a VPN server at 192.168.123.6, you need to specify the following virtual server mapping as shown in the table below: Service Port Server IP Enable 21 192.168.123.1 X 80 192.168.123.2 X 172...
Page 34 - every incoming packet to detect its validity.
7.8.5 | Advanced In this section you can enable/disable Stateful Packet Inspection (SPI), Discard Ping from WAN, and PPTP and IPSec VPN Passthrough types. When Discard Ping From WAN is enabled, computers on the Internet will not get a reply back from the VPN Broadband Router when it is being “ping”e...
Page 40 - authentication process.
7.9.5 | PPTP/L2TP Server Point-to-Point and Layer 2 Tunneling Protocols (PPTP / L2TP) allows the secure remote access over the Internet by simply dialing in a local point provided by an ISP. The following screen displays the management interface where you enter username and passwords for authorized ...
Page 44 - When this is enabled, the login page appears as follows:
When this is enabled, the login page appears as follows: 7.14 | DDNS (Dynamic DNS) Dynamic DNS provides users on the Internet a method to tie their domain name(s) to computers or servers. DDNS allows your domain name to follow your IP address automatically by having your DNS records changed when you...
Page 47 - | IPSec Settings Guide
8 | IPSec Settings Guide (For Reference/Example Only) 8.1 | Local Security Policy Settings Step 1: In Windows 2000/XP click the Start button, select Settings and then Control Panel. The Control Panel window will open. Windows XP users may need to click “Performance and Maintenance” in the Control Pa...
Page 49 - and click “Add” to create a new rule.
8.2 | Create Two IP Filter Lists (PC -> Router / Router -> PC) Filter List 1 (XP PC -> Router) Step 1: From the “to_vpn_router” Properties window, deselect the “Use Add Wizard” check box and click “Add” to create a new rule. Step 2: The “Edit Rule Properties” window will open. Click “Add” t...
Page 50 - Step 4: Deselect the “Use Add Wizard” check box and click Add.
Step 3: The “IP Filter List” window opens. Enter “xp->router” in the “Name” field. Step 4: Deselect the “Use Add Wizard” check box and click Add. Step 5: The “Filter Properties” window opens. Select “A specific IP Address” from the Source Address field and enter the IP address (192.168.1.1). Step...
Page 52 - Step 13: Select “Custom” and click “OK”.
Step 11: The “Required Security Properties” window opens. Select “Negotiate security” and then check the “Session key perfect forward security (PFS)”. Step 12: Click the “Edit” button to select a security method. The “New Security Method” window will now appear. Step 13: Select “Custom” and click “O...
Page 55 - Step 18: Select the “Tunnel Setting” tab.
Step 18: Select the “Tunnel Setting” tab. Step 19: Check “The tunnel endpoint is specified by this IP address” and enter “192.168.1.254.” Step 20: Select the “Connection Type” tab. Step 21: On the “Connection Type” page, select “All Network connections”. Step 22: Click “OK” to complete the tunnel 1 ...
Page 57 - The “Key Exchange Settings” window opens.
Step 13: Click OK to complete the tunnel 1 router->xp configuration. 8.3 | Configuring the IKE Properties Step 1: From the “to_vpn_router Properties” window, select the “General” tab and click “Advanced”. The “Key Exchange Settings” window opens. Step 2: Check the “Master key perfect forward secr...
Page 58 - The “Key Exchange Security Methods” window opens.
The “Key Exchange Security Methods” window opens. Step 4: Click the “Add” button. The “IKE Security Algorithms” window opens. Step 5: Select “SHA1” from the Integrity algorithm field. Step 6: Select “3DES” from the Encryption algorithm field. Step 7: Select “Medium (2)” from the Diffie-Helman group.
Page 59 - | Example IPSec VPN Configuration; VPN Router
8. 4 | Example IPSec VPN Configuration VPN Router WAN IP Address: 192.168.1.254 LAN IP Address: 192.168.2.1 PC 192.168.2.xxx Set the VPN settings as follows: VPN: Enable Max. number of tunnels: 2 ID: 1 Tunnel Name: 1 Method: IKE When finished, click “More”.
Page 63 - | Troubleshooting; A. Verifying your connection to the router
9 | Troubleshooting A. Verifying your connection to the router If you are unable to access the Router’s web-based administration pages, then you may not be properly connected or configured. To determine your TCP/IP configuration status please follow the steps below: 1. Click Start then choose Run. 2...
Page 64 - Use the same pre-shared key between two endpoints; I. I have authentication problems with the L2TP or PPTP VPN Server
F. I am having problems establishing a PPPoE xDSL WAN connection Some ISP’s require you to enter the domain name in addition to your username and password. For instance, for SBC Global, enter [email protected]. For Ameritech users, enter [email protected]. BellSouth users may need to enter...
Page 65 - J. I forgot my password and can no longer log into the router.; to factory defaults.; K. Upgrading the firmware; continuing to use it.
J. I forgot my password and can no longer log into the router. You should restore your router to factory defaults via its hardware reset button. Locate the reset button (to the right of the power input). While the device is powered on, use a paper clip to depress this button for about 5-7 seconds an...
Page 66 - 0 | Technical Specifications; WAN Connection Types:
10 | Technical Specifications Standards: IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet Hardware / Ports: LAN Port 4x RJ45, 10/100 Mbps with Auto-MDI/MDIX (BR14VPN) 8x RJ45, 10/100 Mbps with Auto-MDI/MDIX (BR18VPN) WAN Port 1x RJ45, 10/100 Mbps with Auto-MDI/MDIX COM Port 1x DB9 (...
Page 67 - Operating Temperature:; VCCI
Dynamic IP L2TP PPTP BigPond Static IP Input Power: 5V 2A Operating Temperature: 0~40 o C Humidity: 10%~90% non-condensing Compliances: FCC CE VCCI UL
Page 69 - settings of every computer on your home network.
DHCP - Dynamic Host Configuration Protocol. This protocol automatically configures the TCP/IP settings of every computer on your home network. DMZ - Allows a networked computer to be fully exposed to the Internet. This function is used when the special application sensing tunnel feature is insuffici...
