Page 2 - Copyright; All rights reserved.; Trademarks
- 2 - Copyright Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implicati...
Page 3 - TABLE OF CONTENTS; CHAPTER 2 | Getting to know the EZ ConnectTM Cable Modem Gateway
- 3 - TABLE OF CONTENTS CHAPTER 1 | Introduction Features and Benefits Package Contents Minimum Requirements CHAPTER 2 | Getting to know the EZ Connect™ Cable Modem Gateway LED Indicators Rear Panel Description Resetting and Restoring the EZ Connect™ Cable Modem Gateway CHAPTER 3 | Installation Basi...
Page 4 - CHAPTER 1 | Introduction; A new and improved way to install your Gateway
- 4 - CHAPTER 1 | Introduction Congratulations on your purchase of the EZ Connect™ Cable Modem Gateway. SMC is proud to provide you with a powerful yet simple communication device for connecting your local area network (LAN) to the Internet. Features and Benefits • EZ 3-Click Installation Wizard - A...
Page 8 - CHAPTER 3 | Installation; Note
- 8 - CHAPTER 3 | Installation The EZ Connect™ Cable Modem Gateway can be installed in any location where you have cable Internet access, and your cable Internet service provider has approved the Gateway. To confirm you meet these 2 criteria points, please contact your cable operator. For general in...
Page 9 - CHAPTER 4 | Configuring your Computer; Windows Me; NOTE; : Windows may ask you for the
- 9 - CHAPTER 4 | Configuring your Computer The information outlined in this chapter will guide you through the configuration for the following Operating Systems: • Windows 95/98 • Windows Me • Windows 2000 • Windows XP • Apple Macintosh Configuring Windows 95/98/Me 1. Access your Network settings b...
Page 10 - Configuring Windows XP
- 10 - Configuring Windows 2000 1. Access your Network settings by clicking [Start], choose [Settings], and then select [Control Panel] 2. In the Control Panel, locate and double-click the [Network and Dial-up Connections] icon 3. Locate and double-click the [Local Area Connection] icon for the Ethe...
Page 11 - Configuring a Macintosh Computer; Built-in Ethernet is selected in the Show field.
- 11 - 6. Reboot your PC. Configuring a Macintosh Computer You may find that the instructions here do not exactly match your screen. This is because these steps and screen shots were created using Mac OS 10.2. Mac OS 7.x and above are all very similar, but may not be identical to Mac OS 10.2. 1. Pul...
Page 12 - CHAPTER 5 | Configuring the EZ ConnectTM Cable Modem Gateway; Disable any firewall or security software that may be running.; Browser Configuration
- 12 - CHAPTER 5 | Configuring the EZ Connect™ Cable Modem Gateway After you have configured TCP/IP on a client computer, use a web browser to configure the EZ Connect™ Cable Modem Gateway. The Gateway can be configured by any Java-supported browser including Internet Explorer 5.0 or above, or Netsc...
Page 13 - : Usernames and Passwords are case sensitive
- 13 - Accessing the EZ Connect™ Cable Modem Gateway’s Web Management To access the EZ Connect™ Cable Modem Gateway’s web-based management screens, follow the steps below: 1. Launch your web-browser. NOTE : Your computer does not have to be ONLINE to configure the EZ Connect™ Cable Modem Gateway. 2....
Page 14 - Making Configuration Changes; SYSTEM; Password Settings; LAN; The; PRIVATE; Enable or Disable the integrated DHCP server
- 14 - CHAPTER 6 | Navigating the Web-based Administration The EZ Connect™ Cable Modem Gateway’s management interface allows you to configure both basic and advanced features and options. Some of these advanced functions include: hacker attack detection, IP and MAC address filtering, intrusion detec...
Page 15 - NAT; Port Forwarding
- 15 - LAN IP Use the LAN section to configure the LAN IP address for the Gateway and to enable the DHCP server for dynamic client address allocation. You can also configure the Lease Time for the DHCP clients on your network. Private LAN IP Settings Define the Gateway’s private LAN settings. The IP...
Page 16 - Predefined Service
- 16 - To access the Port Forwarding configuration page, on the Side Navigation bar, click on [NAT] link and then click on the [Port Forwarding] link. This Port Forwarding function supports 2 types of Services: • Predefined Service • Customer Defined Service Predefined Service The Predefined Service...
Page 18 - FIREWALL; Firewall Enable/Disable; public LAN
- 18 - With this configuration, all HTTP (Web) TCP traffic on port 8000 from any IP Address from the WAN side will be redirected through the firewall to the Internal Server (192.168.0.100) on port 80. NOTE : This configuration is useful because you don’t have to reconfigure your web server to accept...
Page 19 - Predefined Filtering; Predefined Filtering Access Rule:; Under the Customer Defined Section, click on the [Add] button
- 19 - The second section is used to configure Access Rules for the Private LAN to the Internet. These rules will block services on the private LAN to the Internet. For convenience, each Access Control section includes 2 filtering options: • Predefined Filtering • Customer Defined Filtering Predefin...
Page 20 - : The Name is only for reference purposes.
- 20 - 3. On the Customer Defined Filter page, define a Name for the service/application that you want to block. NOTE : The Name is only for reference purposes. 4. Then select the protocol type from the pull-down menu that they would like to block. The options are TCP | UDP | TCP/UDP. 5. Select the ...
Page 21 - IR Replacement – Default Setting: Disable address replacement; host – Default Setting: unchecked
- 21 - To configure a Special Application Rule, follow the steps outlined below: 1. On the Side Navigation bar, click on [Firewall] then select [Special Application] 2. Click on the [Add] button on the Special Application page to access the [Trigger] configuration section. 3. Enter in the [Name] tha...
Page 22 - URL Blocking; Press the [Add Keyword] button to save this keyword or URL.; : This list will support 50 Keywords or URLs.; Schedule Rule
- 22 - URL Blocking This section allows you to control the content network. This feature is good for both business and parents looking to control the content accessible from a web browser. To access the URL Blocking configuration page, on the Side Navigation bar, click on [Firewall] link and then cl...
Page 23 - Define the appropriate settings for a schedule rule.
- 23 - To access the Schedule Rule configuration page, on the Side Navigation bar, click on [Firewall] link and then click on the [Schedule Rule] link. To enable this option, click the [Enable Schedule Function] checkbox. To configure Schedule Rules, follow the steps outlined below: 1. On the Side N...
Page 24 - TOOLS; Click [OK] on the confirmation dialog box; : The Reboot will be complete when the power LED stops blinking.; STATUS
- 24 - TOOLS The Tools menu allows a user to Reboot the Gateway. To reboot the Gateway, follow the steps below: 1. Click the [Apply] button 2. Click [OK] on the confirmation dialog box 3. The Gateway will reboot. NOTE : The Reboot will be complete when the power LED stops blinking. STATUS The Status...
Page 26 - B.1 | Verify you are connected to the EZ ConnectTM Cable Modem Gateway; Type “cmd” or “command” (without the quotes) to open a DOS prompt.
- 26 - APPENDIX A | Telnet and SSH CLI Commands Refer to the 8014 CLI document for command specifics. APPENDIX B | Troubleshooting This appendix describes common problems you may encounter and possible solutions to them. B.1 | Verify you are connected to the EZ Connect™ Cable Modem Gateway If you ar...
Page 27 - Open a DOS window as described above.
- 27 - Confirm that you have a good link light on the Gateway’s port to which this computer is connected. If not, please try another cable. If you have a good link light, please open up a DOS window as described in section A.1 and type “ipconfig /renew” (without the quotes) If you are still unable t...
Page 28 - Click Start, then choose Run; Good Connection
- 28 - settings will be erased! If you still cannot access the Gateway once you have reset it, please contact your cable operator for assistance. B.4 | Pinging the EZ Connect™ Cable Modem Gateway To verifying Your TCP/IP Connection is configured properly and you are able to access the EZ Connect™ Ca...
Page 30 - Configure a Special Application rule as described in the; Firewall section of
- 30 - ACTION: • Configure a Special Application rule as described in the Firewall section of CHAPTER 6. • Confirm that an Access Control (Port Filtering) rule is not blocking the ports used by the application. Refer to the Firewall section of CHAPTER 6. • Contact your cable operator for assistance ...
Page 32 - APPENDIX D | Compliances; FCC Interference Statement
- 32 - APPENDIX D | Compliances FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against radio interference in a commercial envir...
Page 33 - APPENDIX E | Technical Support
- 33 - APPENDIX E | Technical Support At this time, the SMC8014 is only distributed through cable operators. Contact your cable operator with any technical support needs you may have. PHONE From U.S.A. and Canada (24 hours a day, 7 days a week) • (800) SMC-4-YOU • (949) 679-8000 • Fax: (949) 679-148...
