Page 3 - From SMC’s Tiger line of feature-rich workgroup LAN solutions
20 Mason,Irvine, CA 92618Phone: (949) 679-8000 TigerAccess-EE CPEInstallation Guide From SMC’s Tiger line of feature-rich workgroup LAN solutions February 2007 Pub. # 150200004100H
Page 6 - ii
ii WARRANTIES EXCLUSIVE: IF AN SMC PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY SHALL BE REPAIR OR REPLACEMENT OF THE PRODUCT IN QUESTION, AT SMC’S OPTION. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMP...
Page 7 - iii; OMPLIANCES
iii C OMPLIANCES FCC - Class B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired oper...
Page 8 - iv; Industry Canada - Class B
C OMPLIANCES iv If your equipment causes harm to the telephone network, the telephone company may discontinue your service temporarily. If possible, they will notify you in advance. But if advance notice is not practical, you will be notified as soon as possible. You will be informed of your right t...
Page 10 - Warnings and Cautionary Messages; End of Product Life Span
C OMPLIANCES vi Warnings and Cautionary Messages Warnings (in German) Environmental Statement The manufacturer of this product endeavours to sustain an environmentally-friendly policy throughout the entire production process. This is achieved though the following means:• Adherence to national legisl...
Page 11 - vii; Manufacturing Materials; Purpose
C OMPLIANCES vii Manufacturing Materials There are no hazardous nor ozone-depleting materials in this product. Documentation All printed documentation for this product uses biodegradable paper that originates from sustained and managed forests. The inks used in the printing process are non-toxic. Pu...
Page 12 - viii
Page 13 - ix; ABLE
ix T ABLE OF C ONTENTS 1 About the TigerAccess-EE CPE . . . . . . . . . . . . . . . . . 1-1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1VDSL Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 14 - Glossary
Page 15 - Overview
1-1 C HAPTER 1 A BOUT THE T IGER A CCESS -EE CPE Overview This Ethernet-Over-VDSL2 CPE system consists of an end-user CPE (Customer Premise Equipment) and a VDSL2 switch that are connected by standard telephone cable. The VDSL connection delivers an Ethernet data link rated up to 100 Mbps symmetric ...
Page 17 - VDSL T; VDSL Technology; Figure 1-1 Providing Broadband Internet Access through VDSL
VDSL T ECHNOLOGY 1-3 VDSL Technology VDSL (Very High Bit-Rate Digital Subscriber Line) is at the high-end of all the DSL technologies, offering the best combination of fiber optics and copper to provide high-speed broadband Internet access. VDSL’s primary application is in providing a broadband data...
Page 18 - Features and Benefits; High-speed Internet access over existing phone lines
A BOUT THE T IGER A CCESS -EE CPE 1-4 data rate in the downstream (receive) direction than in the upstream (transmit) direction. VDSL delivers high-performance online applications, such as high-quality video and other switched multimedia services. This Ethernet VDSL2 CPE system provides robust perfo...
Page 19 - System Requirements
S YSTEM R EQUIREMENTS 1-5 • Supports ITU-T VDSL/VDSL2 and ANSI T1E1.4 Part 1 VDSL interface standards, as well as other evolving ETSI, ANSI, and ITU VDSL standards for the copper local loop • Spectral compatibility with VDSL, VDSL2, ADSL, ADSL2+, ISDN (2B1Q/4B3T), Smartphone digital PBX extensions a...
Page 21 - Unpacking
2-1 C HAPTER 2 H ARDWARE D ESCRIPTION Unpacking After unpacking this CPE, check the contents to be that sure you have received all the components. Then, before beginning the installation, be sure that you have all other necessary installation equipment. Please inform your dealer if there are any inc...
Page 22 - Front and Rear Panel; The following figure shows the external components of the CPE:; Figure 2-1 Front and Rear Panels
H ARDWARE D ESCRIPTION 2-2 Front and Rear Panel This device is an external VDSL2 CPE for high-speed Internet access applications. The front panel of the CPE provides an array of system and port status indicators. The rear panel includes ports for the VDSL line, a 10/100 Mbps Ethernet connection to a...
Page 23 - System and Port Status LEDs; Table 2-1 System and Port Status LEDs; Status
S YSTEM AND P ORT S TATUS LED S 2-3 System and Port Status LEDs The CPE includes key system and port indications that simplify installation and network troubleshooting. The LEDs, which are located on the front panel for easy viewing, are described in the following table. Table 2-1 System and Port St...
Page 25 - Installation Overview; Figure 3-1 Connecting the CPE
3-1 C HAPTER 3 I NSTALLATION Installation Overview Before installing the CPE, verify that you have all the items listed in the “Unpacking” on page 2-1. If any of the items are missing or damaged, contact your local distributor. Also, be sure you have all the necessary tools and cabling before instal...
Page 26 - Powering On
I NSTALLATION 3-2 1. Using standard telephone cable, connect the CPE’s RJ-11 LINE port to the RJ-11 telephone wall jack providing the VDSL service. 2. Connect a telephone or fax machine to the RJ-11 port on the CPE labeled PHONE. 3. For the Ethernet connection, make sure you have installed a 10BASE-...
Page 27 - Configuring the TCP/IP Protocols; Select “TCP/IP” from the list of network protocols this may include
C ONFIGURING THE TCP/IP P ROTOCOLS 3-3 Configuring the TCP/IP Protocols To connect the CPE to a computer through its Ethernet port, the computer must have an Ethernet network adapter card installed, and be configured for the TCP/IP protocol. Many service providers configure TCP/IP for client compute...
Page 28 - Windows XP
I NSTALLATION 3-4 Windows XP 1. Click “Start/Control Panel/Network Connections.” 2. Right-click the “Local Area Connection” icon for the adapter you want to configure. 3. Highlight “Internet Protocol (TCP/IP).” 4. Click on “Properties.” 5. Select the option “Obtain an IP address automatically” and “...
Page 29 - Diagnosing CPE Indicators; Table A-1 Troubleshooting Chart
A-1 A PPENDIX A T ROUBLESHOOTING Diagnosing CPE Indicators CPE operation is easily monitored via the LED indicators to identify problems. The table below describes common problems you may encounter and possible solutions. If the solutions in the table fail to resolve the problem, contact technical s...
Page 30 - If You Cannot Connect to the Internet
T ROUBLESHOOTING A-2 If You Cannot Connect to the Internet • Check that your computer is properly configured for TCP/IP. See “Configuring the TCP/IP Protocols” on page 3-3. • Make sure the correct network adapter driver is installed for your operating system. If necessary, try reinstalling the drive...
Page 31 - Twisted-Pair Cable and Pin Assignments; Each wire pair must be attached to the RJ-45 connectors in a
B-1 A PPENDIX B C ABLES Twisted-Pair Cable and Pin Assignments For 10BASE-T and 100BASE-TX connections, the twisted-pair cable must have two pairs of wires. Each wire pair is identified by two different colors. For example, one wire might be green and the other, green with white stripes. Also, an RJ...
Page 32 - Pin
C ABLES B-2 10BASE-T/100BASE-TX Pin Assignments Use unshielded twisted-pair (UTP) or shielded twisted-pair (STP) cable for RJ-45 connections: 100-ohm Category 3, 4 or 5 cable for 10 Mbps connections, or 100-ohm Category 5 cable for 100 Mbps connections. Also be sure that the length of any twisted-pa...
Page 33 - Straight-Through Wiring
T WISTED -P AIR C ABLE AND P IN A SSIGNMENTS B-3 Straight-Through Wiring If twisted-pair cable is to join two ports and only one of the ports has an internal crossover (MDI-X), the two pairs of wires must be straight-through. (When auto-negotiation is enabled for the RJ-45 port on the CPE, you can u...
Page 34 - Crossover Wiring; Figure B-3 Crossover Wiring; Cable Testing for Existing Category 5 Cable
C ABLES B-4 Crossover Wiring If the twisted-pair cable is to join two ports and either both ports are labeled with an “X” (MDI-X) or neither port is labeled with an “X” (MDI), a crossover must be implemented in the wiring. (When auto-negotiation is enabled for the RJ-45 port on the CPE, you can use ...
Page 37 - VDSL Functional Criteria; Ports
C-1 A PPENDIX C S PECIFICATIONS VDSL Functional Criteria Band Plan: Up to 6 bandsSignal Bandwidth: 25 kHz to 30MHzOptional Band: US0 operating at 4~25 kHz (low end) to 138~276 kHz (high end) Multi-Carrier-Modulation (MCM) - DMT modulationInterleaving: general convolutionTone Spacing: 8.6 kHzUpstream...
Page 38 - Watts maximum; Standards
S PECIFICATIONS C-2 Power Consumption 7 Watts maximum Input Power 12 VDC (via AC power adapter), 1 A maximumTypical 700 mA maximum Size 15.5 x 12.85 x 2.8 cm (6.1 x 5.06 x 1.1 in.) Weight 374 g (13.19 oz) Temperature Operating: 0 °C to 40 °C (32 °F to 104 °F)Storage: -40 °C to 70 °C (-40 °F to 158 °...
Page 39 - Compliances; CE Mark
C OMPLIANCES C-3 Compliances CE Mark Emissions FCC Class BFCC Part 68Industry Canada Class BEN55022 (CISPR 22) Class BEN 61000-3-2/3CNS 13438 Class B Immunity EN 61000-4-2/3/4/5/6/8/11 Safety CSA/CUS (CSA 22.2. NO 60950-1 & UL60950-1)CB (IEC60950-1)
Page 41 - LOSSARY; Bandwidth
Glossary-1 G LOSSARY 10BASE-T IEEE 802.3 specification for 10 Mbps Ethernet over two pairs of Category 3, 4, or 5 UTP cable. 100BASE-TX IEEE 802.3u specification for 100 Mbps Fast Ethernet over two pairs of Category 5 or better UTP cable. Auto-Negotiation Signalling method allowing each node to sele...
Page 42 - International Telecommunication Union
G LOSSARY Glossary-2 Ethernet A network communication system developed and standardized by DEC, Intel, and Xerox, using baseband transmission, CSMA/CD access, logical bus topology, and coaxial cable. The successor IEEE 802.3 standard provides for integration into the OSI model and extends the physic...
Page 43 - A group of interconnected computer and support devices.
G LOSSARY Glossary-3 Local Area Network (LAN) A group of interconnected computer and support devices. Media Access Control (MAC) A portion of the networking protocol that governs access to the transmission medium, facilitating the exchange of data between network nodes. Management Information Base (...
Page 44 - Transmission Control Protocol/Internet Protocol; provides a datagram mode for packet-switched communications. It; Very high data rate Digital Subscriber Line
G LOSSARY Glossary-4 Transmission Control Protocol/Internet Protocol (TCP/IP) Protocol suite that includes TCP as the primary transport protocol, and IP as the network layer protocol. UTP Unshielded twisted-pair cable. User Datagram Protocol (UDP) UDP provides a datagram mode for packet-switched com...
Page 45 - Numerics; NDEX
Index-1 Numerics 10BASE-T/100BASE-TX pin assignments B-2 C cable crossover B-4straight-through B-3testing category 5 cable B-4 cable connections 3-1compliances emissions C-3immunity C-3safety C-3 CPE description 1-1features 1-4 crossover Ethernet cable B-4 F front panel 2-2 H hardware, description 2...
