Page 4 - Copyright
Copyright Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or ...
Page 6 - ii
L IMITED W ARRANTY ii WARRANTIES EXCLUSIVE: IF AN SMC PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY SHALL BE REPAIR OR REPLACEMENT OF THE PRODUCT IN QUESTION, AT SMC’S OPTION. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES OR CONDITI...
Page 7 - iii; OMPLIANCES; Industry Canada - Class B
iii C OMPLIANCES FCC - Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment ...
Page 8 - iv; EC Conformance Declaration - Class B
C OMPLIANCES iv EC Conformance Declaration - Class B SMC contact for these products in Europe is: SMC Networks Europe,Edificio Conata II,Calle Fructuós Gelabert 6-8, 2 o , 4 a , 08970 - Sant Joan Despí,Barcelona, Spain. This information technology equipment complies with the requirements of the Coun...
Page 9 - Safety Compliance
C OMPLIANCES v Safety Compliance Underwriters laboratories Inc. (USA) Important! Before making connections, make sure you have the correct Cord Set. Check it (read the label on the cable) against the following specification list. Wichtige Sicherheitshinweise (Germany) 1. Bitte lesen Sie diese Hinwei...
Page 11 - vii; ABLE
vii T ABLE OF C ONTENTS TigerAccess Extended Ethernet CPE . . . . . . . . . . . . . . 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1VDSL Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 12 - viii
Page 13 - CPE; Introduction
1 T IGER A CCESS E XTENDED E THERNET CPE Introduction SMC’s TigerAccess Extended Ethernet CPE system consists of end-user CPE (Customer Premise Equipment) and a VDSL switch that are connected by standard telephone cable. The VDSL connection delivers an Ethernet data link rated up to 15 Mbps symmetri...
Page 15 - VDSL T; VDSL Technology
VDSL T ECHNOLOGY 3 VDSL Technology VDSL (Very High Bit-Rate Digital Subscriber Line) is at the high-end of the DSL technologies, offering the best combination of fiber optics and copper to provide high-speed broadband Internet access. VDSL’s primary application is in providing a broadband data servi...
Page 16 - Features and Benefits
T IGER A CCESS E XTENDED E THERNET CPE 4 VDSL delivers high-performance online applications, such as high-quality video and other switched multimedia services. SMC’s Ethernet VDSL CPE system provides robust performance, with a symmetric data rate up to 15 Mbps, and a range up to 1770 m (5800 ft). SM...
Page 17 - Package Checklist
P ACKAGE C HECKLIST 5 • Spectral compatibility with xDSL, ISDN (2B1Q/4B3T), Smartphone digital PBX extensions and narrowband interference • Robust operation on severely distorted lines • Supports power back-off algorithm that permits a mixed distance deployment • Simple plug-and-play installation • ...
Page 18 - System Requirements
T IGER A CCESS E XTENDED E THERNET CPE 6 System Requirements Before you start installing the SMC TigerAccess Extended Ethernet CPE, make sure you can provide the right operating environment. See the following installation requirements: • A PC or Macintosh with a 10/100 Mbps Ethernet adapter card ins...
Page 19 - TigerAccess Extended Ethernet CPE
7 H ARDWARE D ESCRIPTION TigerAccess Extended Ethernet CPE The SMC7500A/VCP is an external VDSL CPE product for high-speed Internet access applications. The device provides an Ethernet connection to a computer, and an RJ-11 telephone jack for connection to a telephone. The following figure shows the...
Page 20 - LED Status
H ARDWARE D ESCRIPTION 8 LED Status LED Status Description POWER On Power is being supplied to the CPE. LINK (LAN) On Indicates a valid 10/100BASE-TX Ethernet link. ACTIVITY (LAN) Flashing Indicates that the CPE is transmitting or receiving data on the Ethernet port. LINK (LINE) On Indicates that th...
Page 21 - NSTALLATION; Overview
9 I NSTALLATION Overview Before installing the CPE, verify that you have all the items listed in the Package Checklist, on page 5. If any of the items are missing or damaged, contact your local SMC distributor. Also, be sure you have all the necessary tools and cabling before installing the CPE. Mou...
Page 22 - Cable Connections
I NSTALLATION 10 Cable Connections Depending on the wiring configuration used in your house, separate wall jacks may be used for telephone and VDSL services. Otherwise, you will need to connect telephones and your computer directly to the CPE. 1. Using standard telephone cable, connect the CPE’s RJ-...
Page 23 - Powering On
P OWERING O N 11 When inserting an RJ-45 plug, be sure the tab on the plug clicks into position to ensure that it is properly seated. Caution: Do not plug a phone jack connector into any RJ-45 port. Use only twisted-pair cables with RJ-45 connectors that conform to FCC standards. Notes: 1. When conn...
Page 26 - ROUBLESHOOTING; Diagnosing CPE Indicators
14 T ROUBLESHOOTING Diagnosing CPE Indicators The TigerAccess Extended Ethernet CPE operation is easily monitored via the LED indicators to identify problems. The table below describes common problems you may encounter and possible solutions. If the solutions in the table fail to resolve the problem...
Page 28 - Straight-Through Cable
T ROUBLESHOOTING 16 connected straight through to pins 1, 2, 3, and 6 at the other end of the cable. Straight-Through Cable If the twisted-pair cable is to join two ports and only one of the ports has an internal crossover (MDI-X), the two pairs of wires must be straight-through. Pin MDI-X Signal Na...
Page 29 - Crossover Cable
C ROSSOVER C ABLE 17 Crossover Cable If the twisted-pair cable is to join two ports and both ports are labeled with an “X” (MDI-X), or neither port is labeled with an “X” (MDI), a crossover must be implemented in the wiring. RJ-11 Ports Standard telephone RJ-11 connectors and cabling can be found in...
Page 31 - PECIFICATIONS
19 S PECIFICATIONS Functional Criteria Data Rate/Range 15 Mbps symmetric up to 1070 m (3500 ft) 10 Mbps symmetric up to 1220 m (4000 ft)5 Mbps symmetric up to 1370 m (4500 ft)4 Mbps downstream/1 Mbps upstream asymmetric up to 1770 m (5800 ft) VDSL Specifications VDSL Standards Supports evolving ETSI...
