SMC Networks SMC6405TX - Manual

Page 5 - Limited Warranty

L IMITED W ARRANTY Limited Warranty Limited Warranty Statement: SMC Networks, Inc. (“SMC”) warrants its products to be free from defects in workmanship and materials, under normal use and service, for the applicable warranty term. All SMC products carry a standard 90-day limited warranty from the da...

Page 7 - OMPLIANCES; EC Conformance Declaration - Class B

i C OMPLIANCES FCC - Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea-sonable protection against harmful interference in a residential installation. This equip-ment ...

Page 8 - ii; Industry Canada - Class B; Safety Compliance

C OMPLIANCES ii Industry Canada - Class B This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled “Dig-ital Apparatus,” ICES-003 of the Department of Communications. Cet appareil num...

Page 9 - iii

C OMPLIANCES iii Wichtige Sicherheitshinweise (Germany) 1. Bitte lesen Sie diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den späteren Gebrauch auf. 3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie keine Flüssigoder Aerosolreiniger. Am besten eignet sich...

Page 10 - iv

Page 11 - ABLE

T ABLE OF C ONTENTS v T ABLE OF C ONTENTS Description of Hardware . . . . . . . . . . . . . . . . . . . . . . . . 1 Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Front Panel LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Side-Pane...

Page 13 - ESCRIPTION; Features and Benefits

1 D ESCRIPTION OF H ARDWARE D ESCRIPTION OF H ARDWARE The EZ Switch™ 10/100, SMC6405TX, is a 5-port Fast Ethernet switch. Its 5 10BASE-T/100BASE-TX ports deliver dedicated 10/100 Mbps links to each attached LAN segment—all with conventional cabling and adapters. Auto-negotiation is used to select th...

Page 14 - Front Panel LEDs

D ESCRIPTION OF H ARDWARE 2 • Light weight, compact construction with versatile switch stand for installation on a desktop or wall. Front Panel LEDs The front panel of the switch provides status LEDs for “at-a-glance” system monitoring. The following table details the functions of the various indica...

Page 15 - Rear and Bottom Panel Tracks

D ESCRIPTION OF H ARDWARE 3 Side-Panel RJ-45 Ports The side-panel ports are dual-speed RJ-45 ports that support auto-configuration for MDI or MDI-X cable connection. PCs , switches or hubs can be connected to these ports with straight-through cable. Each port supports auto-negotiation, so the optimu...

Page 16 - NSTALLING; Equipment Checklist

I NSTALLING THE S WITCH 4 I NSTALLING THE S WITCH With its versatile switch stand, the EZ Switch 10/100 SMC6405TX can be securely mounted on a desktop or shelf, in either an upright or flat position, or on a wall. Equipment Checklist After unpacking the EZ Switch 10/100, check the contents of the bo...

Page 17 - Selecting a Site

I NSTALLING THE S WITCH 5 Selecting a Site Be sure to follow the site selection guidelines below when choosing a location: • Select a suitable location for the switch: • It should be accessible for installing, cabling and maintaining the switch. • The temperature and humidity should be within the ra...

Page 18 - Instructions

I NSTALLING THE S WITCH 6 Instructions 1. Positioning the Switch: For wall mounting, attach the switch stand to the wall with two small screws, and then slide the switch’s rear-panel track onto the stand. To stand the switch upright, slide the base of the switch onto the stand. To lay the switch fla...

Page 19 - Sample Application

I NSTALLING THE S WITCH 7 Sample Application A typical application for the EZ Switch 10/100 is illustrated below: EZ Switch 10/100 SMC6405TX Desktop PC Printer Notebook PC Scanner Ethernet Hub or Switch

Page 20 - ROUBLESHOOTING

T ROUBLESHOOTING 8 T ROUBLESHOOTING 1. Symptom Power LED does not light after power on. Probable Causes Power outlet or power cord may be defective. Possible Solutions • Check for loose connections. • Check the power outlet by using it for another device. • Replace the power cord. 2. Symptom Link LE...

Page 21 - ABLES; Cable Specifications

C ABLES 9 C ABLES Cable Specifications Twisted-Pair Cable and Pin Assignments Caution: DO-NOT plug a phone jack connector into any RJ-45 port. Use only twisted-pair cables with RJ-45 connectors that conform with FCC standards. For 10BASE-T/100BASE-TX connections, a twisted-pair cable must have two p...

Page 23 - Connectivity Guidelines

C ABLES 11 Connectivity Guidelines Note: Network diameter is defined as the wire distance between two end stations in the same collision domain. Maximum Fast Ethernet Network Diameter Repeater Type and Number Twisted Pair 100BASE-TX Twisted Pair/Fiber 100BASE-TX and FX 1 Class I 200 m (656 ft) 260.8...

Page 24 - PECIFICATIONS

S PECIFICATIONS 12 S PECIFICATIONS EZ Switch 10/100 (SMC6405TX) Ports 5 RJ-45 portsPorts 1-5: Twisted-pair, Auto-MDIX configuration Network Interface RJ-45: 100 ohm, UTP cable 10BASE-T - Categories 3, 4, or 5100BASE-TX - Category 5 LEDs Power - oneLink/Activity - one per port Switching Method Store-...

SMC Networks SMC6405TX - Manual

Table of Contents:

Summary

Other SMC Networks Models