Simpson PRO300SG2DC2K - User Manual
Simpson PRO300SG2DC2K Impact Driver – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TROUBLESHOOTING GUIDE; Using the correct driving bit is necessary.
- Page 3 – DEEPER
- Page 4 – Quik Drive
- Page 5 – PRO SYSTEMS; INSTRUCCIONES DE OPERACIÓN; PRODW; INSTRUCCIONES RÁPIDAS PARA COMENZAR; Instrucciones completas en el interior; primero
- Page 6 – Use la punta correcta.
- Page 8 – Los Accesorios y Sistemas Quik Drive PRO
- Page 9 – INSTRUCTIONS D'UTILISATION; CONSERVEZ CES INSTRUCTIONS.; INSTRUCTIONS POUR UN DÉMARRAGE RAPIDE; Instructions complètes à l'intérieur; Réglez la profondeur.
- Page 10 – Il est nécessaire d’utiliser la mèche adéquate.
- Page 11 – PLUS PROFOND
- Page 12 – Les attachements et systèmes Quik Drive
PRO SYSTEMS
OPERATING INSTRUCTIONS
Attachments: QD
PRODW
, QDPRO
200
G2, QDPRO
200S
G2,QDPRO
250
G2, QDPRO
300S
G2, QDPRO
LDH
G2,
QDPRO
RF
G2, QDPRO
300SRF
G2, QDPRO
PH
G2, QD
HSD60
, QD
HSD75
, QD
PROHX14
G2, QD
PROHX516
G2,
QD
PROPP150
G2, QD
PRO250DW
G2, QD
PROSD150
G2, QD
PROSDX150
G2, QD
PRO250
G3
SAVE THESE INSTRUCTIONS
QUICK START INSTRUCTIONS
Complete instructions inside
DRIVING SCREWS
Be sure screwgun is in
FORWARD.
Start screwgun before
applying driving pressure.
Continue to apply pressure,
keeping bit engaged until
screw is fully driven and
clutch releases.
Keep screwgun running
between screws.
1.
2.
Pointed end first
Set driving depth
Use with or without the
“stand-up” extension
© 20
21
Simpson Strong-Tie Company Inc.
T-QDPROINSNA
21
Deeper
Correct grip
90°
3.
4.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
PARTS - SCHEMATIC - COMPONENTS Check the depth adjustment on the attachment. Reset if necessary.You may have missed the substrate.Example: In flooring, this will occur if you miss the joist. TROUBLESHOOTING GUIDE Guide Tube Feed Pawl Lever( Must be engaged in Feed Pawl Assembly Slot) Feed Pawl Assem...
OPERATING INSTRUCTIONS CONNECT ATTACHMENT TO SCREWGUN OR EXTENSION • Insert mandrel in extension or screwgun, slide attachment on and push tight - untilthe locking lever snaps in place. • You can rotate the attachment any way that is desired. • New tools may be tight and hard to lock in place. If so...
800-999-5099 strongtie.com READ AND FOLLOW ALL INSTRUCTIONSWHEN SERVICING USE ONLY IDENTICAL QUIK DRIVE ® REPLACEMENT PARTS. ATTENTION - Please see screwgun manufacturer’s instructions for safe use of electric power tools. CHANGING NON-SKID TEETH On models with removable non-skid teeth, the nibs can...