SIIG 04-0381A - Manual
SIIG 04-0381A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – USB CardBus Dual-M to be powered. Please plug in; power cable if your device needs additional power.
- Page 4 – USB2EHCI_v108 disk icon that appears on the
- Page 5 – To Verify Mac OS Driver Installation
- Page 7 – Technical Support and Warranty; Q U E S T I O N S ? S I I G ’ s O n l i n e S u p p o r t h a s a n s w e r s !
- Page 8 – FCC COMPLIANCE STATEMENT:; Networking, Sound Cards, and other accessories. SIIG is the premier
1
Hi-Speed USB
CardBus Dual-M
Quick Installation Guide
04-0381A
Features and Benefits
•
Compliant with USB specifications revision 2.0
•
PC Card Interface with Power Management
•
Supports simultaneous operation of multiple high-
speed USB 2.0 and USB 1.1 devices
•
Supports high-speed (480 Mbps), full-speed (12
Mbps), and low-speed (1.5 Mbps) data transfer
modes
•
Includes a high quality switching power adapter to
provide standard power output for each port
Note: USB 1.1 devices are limited to USB 1.1 speeds
even when they are connected to USB 2.0 host adapter
or USB 2.0 hubs.
System Requirements
•
PowerBook G3 or later with an available PC Card
slot
•
Mac OS 8.6 or later *
* Requires Mac OS X (version 10.1.3 or later) for USB
2.0 support
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Package Contents • Hi-Speed USB CardBus Dual-M • Switching power adapter • USB power cable • Driver CD • This quick installation guide Layout * Note: Some USB devices may require the Hi-Speed USB CardBus Dual-M to be powered. Please plug in either the Switching power adapter or the USB power cable...
4 5. Double click v108.img, then double click the USB2EHCI_v108 disk icon that appears on the desktop. 6. At the next window, double click USB2EHCI_v108 to start installation. 7. At the Authorization window, click the lock icon, enter your administrator password, and click OK. 8. Click Continue. Whe...
5 Mac OS X (v10.2.8) or later Mac OS X (v10.2.8) or later have built-in driver support for this Cardbus. Just install the Cardbus and Mac OS will automatically detect and install the correct drivers for it. No additional driver is necessary. To Verify Mac OS Driver Installation Mac OS 8.6, 9.x, X (v...
