SIIG 04-0202A - Manual
SIIG 04-0202A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Package Contents; Hardware Installation; Add New Hardware Wizard
- Page 5 – File; Remove the diskette and restart the system for the new setup to
- Page 6 – Troubleshooting; Driver Update
- Page 7 – Technical Support; Online Support; Step 2: Complete the RMA form; must be; Step 3: Ship the Product
- Page 8 – FCC COMPLIANCE STATEMENT:; • Reorient or relocate the receiving antenna
1
Low Profile PCI I/O
Quick Installation Guide
04-0202A
Introducing the
Low Profile PCI I/O
The
Low Profile PCI I/O
conforms to the new PCI card form factor
standard made for space constrained system designs. Since this
installation guide is written for both,
Low Profile PCI -1S and Low Profile
PCI -1P
boards, some features on this installation guide might not be
present on the model you bought. Please only refer to the features that
apply to your board.
Features and Benefits
•
Conforms to PCI v2.2 Plug and Play
•
Full support for DOS- and Windows-based software
•
IRQ sharing feature eliminates IRQ conflicts
Serial interface:
•
High-speed 16550 UART serial port (9-pin) supports baud rates
up to 920Kbps. Works with various types of serial devices
•
Built-in 16-byte FIFO buffers dramatically increase data transmit/
receive speed
Parallel interface:
•
Conforms to IEEE 1284-1994 parallel port standard
•
High-speed parallel port supports various types of parallel port
devices
•
Supports EPP, ECP(PIO mode), Bi-directional Parallel Port (BPP)
and Standard Parallel Port (SPP) modes
Dimensions:
• PCB: 119.91 mm (L) x 64.41 mm (H)
• Bracket: 18.42 mm (W) x 79.20 mm (H)
System Requirements
•
Pentium or equivalent computer with an available 32-bit PCI slot
•
DOS/Windows 3.1x, Windows 95/98/98 SE/ME/NT 4.0/2000
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Package Contents • One Low Profile PCI I/O board • One Driver Installation diskette• One 5-year warranty card• This quick installation guide Hardware Installation General instructions for installing the card are provided below, since the design of computer cases and motherboards vary. Refer to you...
5 DOS/Windows 3.1x: 1. Insert the Driver Installation diskette, from the C: prompt, type in copy a:\dos\*.*, then press <Enter> . 2. Type in edit autoexec.bat, then press <Enter> . 3. Add C:\CB20XPC.exe at the bottom of the autoexec.bat file. 4. Go to File , save the changes and exit. 5....
6 Troubleshooting Problem: I am installing a parallel port(s) and my system freezes up when Windows tries to install the driver for my printer port. Solution: Enter your system bios, set the onboard parallel port I/O address to 278h, save and exit. In certain systems, the address 278h is reserved fo...
