Shure microphone mixer - Manual
Shure microphone mixer – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Specifications; Optional Accesories
- Page 3 – Front Panel Controls, Connectors, and Indicators; Figure 1. Front Panel; Headphone Volume Control; Input Panel Connectors and Controls; Figure 2. Side Input Panel
- Page 4 – Output Panel Connectors; Operational Notes; Left and Right Positions—Secondary audio source. Monitors
- Page 5 – CAUTION – When set to super-bright intensity, the LEDs in the; Power Sources and Battery-Life; NOTE: AA carbon cells and AA nickel-cadmium cells are not rec-; Interconnecting the FP24 and FP33
- Page 6 – NOTE: When interconnecting the FP24 and FP33, inputs from; Figure 4. FP24/FP33 Mix Bus Interconnect Cable; Negative: Solder to sleeve; Figure 5. Attaching the Supplied Threaded Power; Certification; FCC Declaration of Conformity
General Description
The Shure FP24 is a studio-quality two-channel, portable, stereo
microphone mixer. With assignable L-C-R inputs, built-in slate mi-
crophone, 1 kHz tone oscillator, and headphone monitor, the FP24
is extremely flexible. Its impressive audio performance and com-
prehensive features make it suitable for the front end of any studio
or field production system. Radio, television, and film production
engineers will especially value its compact size, sunlight-readable
LEDs, and rugged mechanical and electrical construction that
make it able to withstand extremes in the field.
Features
High Performance Microphone Inputs
•
Maximum of 66 dB of gain (each input).
•
Premium Lundahl input transformers provide superior audio
quality and freedom from interference problems.
•
Sealed, conductive plastic potentiometers for long life and
reliable gain adjustment.
•
Phantom power, selectable between 48 volts and 15 volts.
•
Switchable low-cut filters with 80 and 160 Hz corner
frequencies, 6 dB per octave. Filters are inserted prior to
any active circuitry to maximize headroom.
•
Inputs assignable to Left, Center (both left and right) or
Right
Audio Performance
•
Dynamic range exceeding 110 dB.
•
10 Hz to 50 kHz audio bandwidth.
•
Exceptionally low distortion characteristics.
•
Discrete, 6-transistor, balanced output drivers provide signal
integrity over long cable runs.
Headphone Monitoring
•
Switchable between program audio or external (stereo) tape
returns.
•
High current headphone output has level control and peak
indicator.
Level Metering
•
Dual-color LEDs indicate clipping and limiter activity for
each channel.
•
Sunlight-readable, seven segment GaN LED output meters.
•
3-position LED brightness switch (intensity selector).
Audio Limiters
•
“Unclippable” input peak limiters with adjustable limiter
threshold (each input).
•
Dual mono or linked stereo limiter operation.
Flexible Powering
•
Internal power from two AA batteries with easy access
battery compartment.
•
Chassis-isolated 5 to 14 VDC input for easy external DC
powering.
•
Power LED indicates low battery power.
Trouble-Free Design
•
High-strength, extruded aluminum chassis with protective
metal end panels withstands punishing field conditions.
•
All-metal connectors mount directly to the chassis for
durability and RF immunity.
•
Free from “Pin 1” grounding problems.
•
RF filtering on all inputs and outputs.
Model FP24 User Guide
Microphone Mixer
27
A
8727 (
Rev. 1
)
200
5
, Shure Incorporated
Printed in U.S.A.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Specifications Gain: Mic Input to Output, per channel, continuously variable Output Gain Range LINE – ∞ – 66 dB TAPE – ∞ – 56 dB Frequency Response: 20 Hz – 30 kHz, +0.2, –0.5 dB; –1 dB at 5 Hz, 50 kHz (relative to 1 kHz level with 150 ohm source, gain controls setat 50%) Equivalent Input Noise: –...
3 Front Panel Controls, Connectors, and Indicators 1 2 L C R L C R TAPE RTN SLATE 1kHz METER L R –30 –15 0 +4 +8 +12 +16 INT EXT PHONES POWER MIC FP24 3 4 5 6 7 8 9 10 11 12 13 1 2 Figure 1. Front Panel 1. Input Gain ControlsSealed, conductive plastic rotary potentiometers. 2. Input Peak/Limiter LED...
4 Output Panel Connectors 1(L) 2(R) LINE OUTPUTS 5–14 VDC + – TAPE RTN 1 2 3 4 5 Figure 3. Side Output Panel 1. Strap SlotAttachment point for camera straps. 2. Tape Return Input Connector3.5 mm ( 1 / 8 in.) TRS stereo (unbalanced) input for head- phone monitoring of external audio sources. Tip = le...
