Shure A412B - Manual
Shure A412B – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Model A412B Microphone Base
User Guide
©2005 Shure Incorporated
27D2977 (Rev. 4)
Printed in U.S.A.
GENERAL
The Shure A412B microphone base allows gooseneck micro-
phones to be quickly mounted in situations where permanent in-
stallation is impractical. The angled XLR input connector maintains
a low profile, while inside the base there is ample room for custom
circuitry.
INSTALLATION
Attaching a Microphone to the Base
Insert the XLR connector on the microphone into the female XLR
connector on the top of the microphone base.
Securing the Microphone Base to a Surface (Optional)
1. Install two No. 6 wood screws, two inches apart, on the mount-
ing surface (see Figure 1, diagram A).
2. Place the key holes over the screw heads and push the micro-
phone into position. Adjust the height of the screws as neces-
sary to secure the microphone (see Figure 1, diagram B).
SECURING THE A412B TO A MOUNTING SURFACE
FIGURE 1
SPECIFICATIONS
Dimensions
See Figure 2
Weight
0.68 kg (1.5 lbs) net
0.91 kg (2.0 lbs) packaged
REPLACEMENT PARTS AND ACCESSORIES
Cable (10 ft)........................................................................ C121
Base Plate Bumpers...................................................80A8053A
DIMENSIONS
FIGURE 2
REMOVING THE BACK PLATE
FIGURE 3
A
B
2 in.
5.16 cm
(2 1/32 in.)
3.0 m
(10 ft)
11.6 cm
(4 9/16 in.)
16.2 cm
(6 3/8 in.)
WIRING DIAGRAM
(3/8 in.)
1 cm
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
