Shure 503BG - Manual
Shure 503BG – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
MODEL 503BG
Unidirectional Dynamic Microphone
Developed for computer voice recognition applications,
the 503BG microphone offers excellent voice fidelity while
reducing background noise. Also use the 503BG in other
close-talking applications such as paging and talkback.
The 503BG features a low-impedance, moving coil type
transducer with an integral humbucking coil and an attached
two-conductor shielded cable with a built-in strain relief. It
produces a frequency response with an essentially constant
output voltage over the voice spectrum when used close to
the sound source.
The 503BG’s case is aluminum with a black enamel finish.
It mounts to a gooseneck, a fixed pipe or a microphone stand
using a standard 5/8”-27 thread. To secure the mounted
BG503, tighten the 4-40 screw with the supplied #4 Allen (hex-
head) wrench.
Features
Optimized performance in voice processing and
computer voice recognition applications.
Smooth frequency response with excellent fidelity
in the voice range.
Cardio
i
d pickup pattern and close-talking opera-
tion keep unwanted signals and background noise
at low levels.
Constant output over voice spectrum when close
talked.
Humbucking coil minimizes undesirable hum
effects such as CRT interference.
Low-impedance design permits long cable runs in
extreme hum fields.
Small unobtrusive design does not interfere with
CRT visibility.
Rugged and reliable for years of consistent
operation.
SPECIFICATIONS
Type
Dynamic, unidirectional (cardio
i
d), close-talking
Frequency Response
100 to 7,000 Hz (Figure 1)
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
TYPICAL FREQUENCY RESPONSE
FIGURE 1
Impedance
170 ohms actual
Output Level (Open Circuit Voltage)
–61.5 dBV/Pa (.84mV)*
–41.5 dB (8.4 mV)**
*1 Pa = 94 dBSPL
**0 dB = 1V/100
µ
bar
Polarity
Positive pressure on diaphragm produces positive voltage
on white conductor with respect to black conductor (Figure 2)
INTERNAL CONNECTIONS
FIGURE 2
Hum Pickup
Maximum 15 dB equivalent SPL in m0e field
Cable
1.2 m (4 ft) two-conductor shielded
Case
Aluminum with black enamel finish; stainless steel
screen.
Model 503BG User Guide
27
C
8091 (
Rev. 7
)
200
7
Shure Incorporated
Printed in
U.S.A
1 cm*
5 cm*
dB
Hz
* distance from speaker to microphone grille
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
