Shop Fox W1822 - Manual

-5- Model W1822 (For Machines Mfg. Since 9/10) SA FE T Y Additional Safety for Sliding Table Saws READ and understand this entire manual AND the table saw owner's manual before using this attach- ment. Serious personal injury may occur if safety and operational informa- tion is not understood and fo...

-6- Model W1822 (For Machines Mfg. Since 9/10) SE TU P The Model W1822 has been carefully packaged for safe transportation. If you notice the machine has been damaged during shipping, please contact your authorized Shop Fox dealer immediately. Unpacking SETUP Inventory Refer to Figures 1 – 2 and the...

-7- Model W1822 (For Machines Mfg. Since 9/10) SE TU P Assembly The assembly process typically requires modifications to your table saw. To make the process easier, we strongly recommend that you have another person help you. Also, if you have to drill new holes, we recommend clamping the components...

-12- Model W1822 (For Machines Mfg. Since 9/10) O PE R ATIO NS OPERATIONS Always wear safety glasses when oper- ating this machine. Failure to comply may result in serious personal injury. DO NOT investigate problems or adjustments while the table saw is running. Wait until the table saw is turned O...

-13- Model W1822 (For Machines Mfg. Since 9/10) O PE R ATIONS Crosscut Fence The crosscut fence can be positioned anywhere along the sliding table and at angle between 50° left and 50° right. To position the fence along the sliding table, loosen the two pivot handles, the set screw on the forward en...

-14- Model W1822 (For Machines Mfg. Since 9/10) O PE R ATIO NS Blade Crosscut Fence Workpiece Figure 19. Example of large panel rip cutting. Crosscutting The Model W1822 enables you to use your table saw to crosscut large panels, as shown in Figure 19 . To make a crosscut with the sliding table, do ...

-15- Model W1822 (For Machines Mfg. Since 9/10) O PE R ATIONS Blade Workpiece Figure 21. Example of miter cutting with the fence positioned 45° to the left. Miter Cutting Blade Workpiece Figure 20. Example of miter cutting with the fence positioned 45° to the right. The crosscut fence can be positio...

-16- Model W1822 (For Machines Mfg. Since 9/10) O PE R ATIO NS ACCESSORIES Sliding Table Saw Accessories The following sliding table saw accessories may be available through your local Woodstock International Inc. Dealer. If you do not have a dealer in your area, these products are also available th...

-17- Model W1822 (For Machines Mfg. Since 9/10) PA RT S 101 103 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 101 102 112 173 115 107 108 101 103 104 170 171 168 172 170 171 172 170 171 172 170 171 172 PARTS Table REF PART # DESCRIPTION REF PART # DESCRIPTION 101 XPBHS09M BUTTO...

-18- Model W1822 (For Machines Mfg. Since 9/10) PA RT S Fence 121 122 123 124 125 126 128 129 131 132 133 134 135 136 137 138 140 141 142 143 144 145 146 147 148 149 150 151 144 154 155 156V2 157 158 164 165 134 162 139 136 121 172 163 162 169 139 140 144 152 142 130V2 160 159 127V2 163 162 161 161 ...

WARRANTY Woodstock International, Inc. warrants all Shop Fox machinery to be free of defects from workmanship and materials for a period of two years from the date of original purchase by the original owner. This warranty does not apply to defects due directly or indirectly to misuse, abuse, neglige...

High Quality Machines and Tools Woodstock International, Inc. carries thousands of products designed to meet the needs of today's woodworkers and metalworkers. Ask your dealer about these fine products: