Shop Fox d3012-3016 - Manual
Shop Fox d3012-3016 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
COPYRIGHT © 2001 BY WOODSTOCK INTERNATIONAL, INC. REVISED JUNE, 2011 (JB)
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
Printed in China
Model D3012–D3016
Wood Clamp Hardware Kit
Instruction Sheet
Phone #: (360) 734-3482 • Online Tech Support: [email protected] • Web: www.shopfox.biz
Introduction
The Shop Fox Wood Clamp Hardware Kit provides
all the necessary hardware to make your own
wood clamp. Wood clamps are very handy during
many woodworking applications. Wood jaws are
non-marring and eliminate the need for pads, and
two wood clamps can work together for a quick
and easy bench vise. The jaws of the clamp should
be made from a hardwood such as maple.
Inventory
Item
Qty.
Wooden Handles .......................................
2
Threaded Clamp Rods .................................
2
Handle Pins .............................................
2
Dowel Nuts (Right-Hand Threads) ...................
2
Dowel Nuts (Left-Hand Threads) ....................
2
Tools Required
• Saw (Hand Saw, Bandsaw, Table Saw or Jig
Saw)
• Drill Press/Drill Bit Set
• Ball Peen Hammer
• Sandpaper
Materials Required
• Hardwood Stock (see
Sizing Information
for
approximate dimensions).
Wear safety glasses during
the entire assembly process.
Failure to comply may result
in serious personal injury.
Be sure to read the entire instruction sheet
before beginning the construction of the wood
clamps. Follow every step and use the rec-
ommended tools and supplies. Also, read the
instruction manuals and follow all safety pre-
cautions for any tools you are using to com-
plete this project. Be certain that the tools
used for this installation are intended for the
task that will be performed. Failure to do this
could result in serious personal injury.
Figure
1
.
Wood Clamp Hardware Kit.
We stand behind our products! In the event that
questions arise about this product, please contact
Woodstock International Technical Support at (360)
734-3482 or send e-mail to:
.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
