Shindaiwa 80836 - Manual
Shindaiwa 80836 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Specifications; Introduction; Install the Pump Lever; Description
- Page 3 – Assembling the Spray Wand; Tightening; Adjusting the Shoulder Straps
- Page 4 – Calibrating the Sprayer; Typical Nozzle Assemblies
- Page 5 – Optional Accessories; Part Number; Application; AVAILABLE SPRAY NOZZLES
- Page 6 – Maintenance; Troubleshooting: Lack of Pressure; CAUSE
- Page 7 – Shindaiwa Limited Warranty
SHINDAIWA OWNER’S/OPERATOR’S MANUAL
SP415 BACK PACK SPRAYER
䊛
Part Number 80836 Rev. 1/04
WARNING!
Minimize the risk of injury to
yourself and others! Read this
manual and familiarize yourself with
the contents. Always wear eye
protection, gloves and a respirator
when operating this unit.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 This manual contains information for the proper assembly,operation and care of your SP415 sprayer. Carefully read andfollow the instructions contained in this manual before operat-ing your sprayer. Specifications Unpack the followingitems shipped inyour sprayer box: ■ Wand ■ Pump Lever andConnecti...
3 Push the wand into the trigger valve and secure with screwcap. Hand tighten to prevent leakage. CAUTION! Do not overtighten! Trigger Valve Wand Screw Cap Assembling the Spray Wand Adjustment Ring Buckle Tightening 1. Place the sprayer on your back with thestaps loosened. 2. Hold the adjustment rin...
4 3. Attach the flow calibrator bottle to the wand: a. Remove the nozzle, cap and filter from the spray wand. b. Mount the flow calibrator coverto the spray wand. c. Reinstall the nozzle, filter andnozzle cap. d. Screw the flow calibrator bottleinto the cover. 4. Using the flow calibrator bottle: a....
