Sherwood R-972 - Manual
Sherwood R-972 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Connecting TV & DVD Player; IC
- Page 3 – Turning on the Unit
- Page 4 – Enjoying Surround Sound
• Be sure to connect speakers firmly and cor-
rectly according to the channel (left and
right) and the polarity (+ and -). If the con-
nections are faulty, no sound will be heard
from the speakers, and if the polarity of the
speaker connection is incorrect, the sound
will be unnatural and lack bass.
■
Caution
• Be sure to use the speakers with the imped-
ance of 6 ohms or above.
• Do not let the bare speaker wires touch
each other or any metal part of this unit.
This could damage this unit and/or the
speakers.
• Never touch the speaker terminals while the
AC input cord is connected to the wall AC
outlet. Doing so could result in electric
shocks.
Placing Speakers
Q
U
IC
K
S
T
A
R
T
G
U
ID
E
1
Connecting Speakers
■
If you have 5.1 ch speakers
■
If you have 7.1 ch speakers
1. Front Left
2. Front Right
3. Center
4. Surround Left
5. Surround Right
6. Subwoofer
7. Surround Back Left
8. Surround Back Right
•
This guide shows you how to connect your speakers and DVD player and enjoy multi-channel surround sound.
•
For full details on using this unit, refer to the main operating instructions.
•
Please be certain that this unit is unplugged from the AC outlet before making any connections.
R-972(AG)-Quick_090225:R-972(AG)-Quick 2009-03-23 오 9:06 페이지 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Connecting TV & DVD Player Q U IC K S T A R T G U ID E 2 • There are three types of video jacks (COMPONENT, S-VIDEO, (composite) VIDEO) for analog video connections and the HDMI connector for digital video and audio connections. Connect them to the corresponding video jacks according to their ca...
Turning on the Unit Playing a DVD Player (VIDEO 2) Q U IC K S T A R T G U ID E 3 1. Connect the AC input cord. 2. Press the [POWER] switch on the front panel to enter the standby mode.3. In the standby mode, press the [ON/STANDBY] button on the front panel or [POWER ON] button on the remote control ...
Enjoying Surround Sound 4 1. Depending on how to select a surround mode, press the [SURROUND] button to select the auto surround mode or the manual surround mode. Auto Surround Mode : The optimum surround mode will be automatically selected depending on the signal format being input. Manual Surround...
