Page 3 - IMPORTANT INFORMATION; RISK OF ELECTRIC; CAUTION
3 E IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFI...
Page 4 - B. Information on Disposal for Business Users
4 E IMPORTANT INFORMATION (Continued) A. Information on Disposal for Users (private households) 1. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dustbin! Used electrical and electronic equipment must be treated separately and in accordance ...
Page 5 - SAFETY PRECAUTIONS; DEAR SHARP CUSTOMER
5 E Thank you for your purchase of a SHARP LCD product. To ensure safety and many years of trouble-free operation of your product, please read the Safety Precautions carefully before using this product. SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause pe...
Page 6 - Especially for child safety
6 E SAFETY PRECAUTIONS (Continued) 19. Batteries — Incorrect use of batteries may cause the batteries to burst or ignite. A leaky battery may corrode the equipment, dirty your hands or spoil your clothing. In order to avoid these problems, make sure to observe the precautions below: • Use the specif...
Page 7 - TIPS AND SAFETY INSTRUCTIONS
7 E - The TFT color LCD panel used in this monitor is made with the application of high precision technology. However, there may be minute points on the screen where pixels never light or are permanently lit. Also, if the screen is viewed from an acute angle there may be uneven colors or brightness....
Page 8 - MOUNTING PRECAUTIONS
8 E MOUNTING PRECAUTIONS • This product is for use indoors.• A mounting bracket compliant with VESA specifications is required. • Since the monitor is heavy, consult your dealer before installing, removing or moving the monitor. • Mounting the monitor on the wall requires special expertise and the w...
Page 9 - Supplied Components; Contents
9 E Supplied Components If any component should be missing, please contact your dealer. Liquid Crystal Display Monitor: 1 Remote control unit: 1 Cable clamp: 2 Power cord: 1 R-6 battery (“AA” size): 2 CD-ROM (Utility Disk for Windows): 1 Setup Manual: 1 Vertical sticker (Operation pa...
Page 10 - Front view; Part Names; Rear view
10 E n Front view 1 2 3 4 5 1. LCD panel 2. Remote control sensor (See page 15. ) 3. Input switch (See page 18. ) 4. Power switch (See page 16. ) 5. Power LED (See page 16.) TIPS • Use a pointed object such as a pen tip to press the switches at the front of the monitor. Part Names n Rear view 17 16 ...
Page 12 - Connecting Peripheral Equipment; Input mode; Connection with a PC or AV equipment
12 E Connecting Peripheral Equipment Caution • Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/ disconnecting cables. Also, read the manual of the equipment to be connected. • Be careful not to confuse the input terminal with the output termi...
Page 13 - Connection when the PN-ZB01
13 E Connecting Peripheral Equipment Connection when the PN-ZB01 (optional) is attached The PN-ZB01 expansion board (optional) allows the use of additional connection terminals. 6. PC/AV DVI-D input terminal • Set DVI of INPUT SELECT on the OPTION menu according to the device to be connected. • Sele...
Page 14 - Connecting the Power Cord; Binding Cables; Removing the Handles
14 E Connecting the Power Cord Caution • Use only the power cord supplied with the monitor. 1. Turn off the main power switch. 2. Plug the power cord (supplied) into the AC input terminal. 3. Plug the power cord (supplied) into the AC power outlet. Binding Cables The cables connected to the terminal...
Page 15 - Preparing the Remote Control Unit; Installing the batteries; Remote control operation range
15 E Preparing the Remote Control Unit Installing the batteries 1. Press the cover gently and slide it in the direction of the arrow. 2. See the instructions in the compartment and put in the supplied batteries (R-6 (“AA” size) x 2) with their plus (+) and minus (-) sides oriented correctly. 3. Clos...
Page 16 - Turning on the main power
16 E Caution • Turn on the monitor first before turning on the PC or playback device. Turning on the main power Main power switch Caution • The main power must be turned on/off with the main power switch. Do not connect/disconnect the power cord or turn the breaker on/off while the main power switch...
Page 17 - Disabling power on/off operations
17 E Turning Power On/Off n Date/time setting • If the time has yet to be set when the monitor is first turned on, the date/time setting screen appears. Set the date and time. DATE/TIME SETTING SET CANCEL / / OK···[MENU] : : 01 01 11 / 12 AM 00 : / 20 1. Press , , or to select the date and time, and...
Page 18 - Basic Operation
18 E Basic Operation 1 2 3 4 5 6 7 8 1. INPUT (Input mode selection) The menu is displayed. Press or to select the input mode, and press to enter. * You can select the input terminal by pressing the input switch of the monitor. Input mode Video Audio PC D-SUB PC D-sub input terminal *1 Audio input t...
Page 20 - Displaying the menu screen; Example of operation; Menu screen display; Menu Items
20 E Menu Items Displaying the menu screen Video and audio adjustment and settings of various functions are enabled. This section describes how to use the menu items. See pages 21 to 25 for details of each menu items. Caution • Do not turn the main power switch off while the menu items are being dis...
Page 21 - Menu item details; SCREEN; PICTURE
21 E Menu item details The menu will differ depending on the input mode. n SCREEN You can move the menu screen display position each time DISPLAY is pressed. AUTO (PC D-SUB/PC RGB) The CLOCK, PHASE, H-POS, and V-POS are automatically adjusted. Pressing performs adjustment. Use this automatic adjustm...
Page 22 - AUDIO; SETUP
22 E USER Adjusts each item when the WHITE BALANCE is set to USER. R-CONTRAST .... Adjusts bright-toned red component. G-CONTRAST .... Adjusts bright-toned green component. B-CONTRAST .... Adjusts bright-toned blue component. R-OFFSET .......... Adjusts dark-toned red component. G-OFFSET ......... A...
Page 23 - OPTION
23 E Menu Items COPY SETTING VALUE When the monitor has been connected to multiple monitors by RS-232C, the settings in the monitor can be copied to the monitor connected to the RS-232C output terminal and to the daisy chain of connected monitors that follows. Selects the settings to copy with COPY ...
Page 24 - MULTI
24 E Menu Items SCAN MODE (AV input) Sets the scan mode used for AV mode input. MODE1 ............... Over-scan display MODE2 ............... Under-scan display MODE3 ............... Under-scan display when the input signal is 1080i/p. Otherwise, over-scan display * Even when MODE1 is selected, unde...
Page 25 - Dual screen display
25 E Menu Items n PIP/PbyP PIP MODES Sets the display method. OFF ......... Displays one screen. PIP ........... Displays a sub screen inside a main screen. PbyP ........ Displays a main screen and a sub screen in a line. PbyP2 ...... Displays a main screen which measures 1280 pixels in the longest ...
Page 26 - Enlarge
26 E n Enlarge • You can align several monitors and integrate them into a single large screen to display. • Up to five monitors can be aligned in both the horizontal and vertical directions. • Each monitor displays enlarged views of separated images. (Example) Horizontal direction: 2 monitors Vertic...
Page 28 - Adjustments for PC screen display; Automatic adjustment; Screen display for adjustment
28 E n ADVANCED items (AV input) (See page 21 for additional Menu item details.) FLESH TONE Adjust the hue control. 3D-NR Reduce the noise of playback images on video. Setting a higher level reduces more noise. However, it may cause blurring on an image. MPEG-NR Reduce block noise caused by digital ...
Page 30 - PC connection; Daisy chain connection...; Communication conditions; Command format
30 E Controlling the Monitor with a PC (RS-232C) You can control this monitor from a PC via RS-232C (COM port) on the PC. You can also connect multiple monitors via a daisy chain by using a PC. By assigning ID numbers to each monitor (see page 31), you can make input mode selection/adjustment or can...
Page 31 - Response code format; Communication interval; ID numbers
31 E Controlling the Monitor with a PC (RS-232C) n Response code format When a command has been executed correctly O K Return code (0D H , 0A H ) A response is returned after a command is executed. * If an ID number has been assigned O K SPC 0 0 1 ID number of responding monitor Space (20 H ) Return...
Page 32 - Commands for ID control
32 E Controlling the Monitor with a PC (RS-232C) n Commands for ID control The command examples shown on this page assume the following connection and ID number set up. ID number: 1 ID number: 2 ID number: 3 ID number: 4 IDST ........ . A monitor receiving this command sets its own ID number in the ...
Page 33 - Setting of the GAMMA user data
33 E Controlling the Monitor with a PC (RS-232C) n Repeater control This system has a function to allow setting of multiple monitors connected in a daisy chain using a single command. This function is called repeater control. You can use Repeater control function without assigning ID numbers. [Examp...
Page 34 - RS-232C command table; Power control/Input mode selection
34 E RS-232C command table How to read the command table Command: Command field (See page 30.) Direction: W When the “Parameter” is set in the parameter field (see page 30), the command functions as described under “Control/Response Contents”. R The returned value indicated under “Reply” can be obta...
Page 35 - SCREEN menu
35 E SCREEN menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) AUTO ASNC W 1 When the input mode is PC D-SUB, PC RGB. - ○ ○ CLOCK CLCK WR 0-1200 0-1200 When the input mode is PC D-SUB, PC RGB. Varies depending on the signal. PHASE PHSE WR 0-63 0-63 When the input...
Page 36 - PICTURE menu
36 E PICTURE menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) AUTO AGIN W 1 When the input mode is PC D-SUB, PC RGB. - ○ ○ ANALOG GAIN ANGA WR 0-127 0-127 When the input mode is PC D-SUB, PC RGB. ○ ANALOG OFFSET ANOF WR 0-127 0-127 When the input mode is PC D-S...
Page 38 - OPTION menu
38 E Controlling the Monitor with a PC (RS-232C) OPTION menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) DATE/TIME SETTING DATE WR AABBCCDDEE AABBCCDDEE AA: Year, BB: Month, CC: Day, DD: Hour, EE: Minute ○ ○ ○ DATE DISPLAY FORMAT DTFT WR 0-2 0-2 0: YYYY/MM/DD, ...
Page 39 - MULTI menu
39 E MULTI menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) ENLARGE ENLG WR 0-1 0-1 0: OFF, 1: ON - ○ ○ ENLARGE MODE EMAG WR 0-4 0-4 0: OFF, 1: 2 x 2, 2: 3 x 3, 3: 4 x 4, 4: 5 x 5 EMHV WR 11-55 11-55 1 x 1 (OFF) to 5 x 5 (“m x n” is expressed as “mn”, where m a...
Page 40 - Initialization/Functional Restriction Setting (FUNCTION) menu
40 E PIP/PbyP menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) PIP MODES MWIN WR 0-3 0-3 0: OFF, 1: PIP, 2: PbyP, 3: PbyP2 ○ ○ ○ PIP SIZE MPSZ WR 1-64 1-64 ○ PIP POS THE LONGEST DIRECTION MHPS W 0-100 ○ R 0-100 ○ THE SHORTEST DIRECTION MVPS W 0-100 ○ R 0-100 ○ ...
Page 42 - Initializing personal information; Settings to connect to a LAN; ■ To set on the monitor
42 E When the PN-ZB01 (optional) is attached, your monitor can be connected to a LAN allowing you to control it from a PC on the LAN. You can also configure the monitor to send e-mail notification when it has a problem. The connection requires a commercially available LAN cable (UTP cable, Category ...
Page 43 - ■ To set from a PC; Set up process; (3) Configuring the monitor’s LAN settings
43 E ■ To set from a PC When the monitor is connected to a PC, LAN settings can be configured via PC. Set up process (1) Connect your monitor to a PC (2) Specify the PC’s IP address (3) Configure the monitor’s LAN settings (1) Connecting your monitor to a PC Connect a commercially available crossove...
Page 44 - Controlling with a PC; ■ Basic operation
44 E 6. Click on “LAN SETUP” under NETWORK. 7. Specify the “DHCP CLIENT”, “IP ADDRESS”,etc. DHCP CLIENT If your LAN has a DHCP server and you wish to obtain an address automatically, change this setting to “ON”. To set the address manually, set this to “OFF”. IP ADDRESS If the DHCP CLIENT is set to ...
Page 45 - ■ INFORMATION; ■ CONTROL; ■ ADJUSTMENT
45 E ■ INFORMATION Information about this monitor appears. ■ CONTROL You can control the operations corresponding to the buttons ( POWER INPUT SIZE ) on the remote control unit. (See page 18.) TIPS • In standby mode, Power ON is the operation available. ■ ADJUSTMENT You can adjust these settings whi...
Page 49 - ■ SNMP; ■ SERVICE & SUPPORT
49 E Controlling the Monitor with a PC (LAN) ■ SNMP You can configure settings related to SNMP. SNMP SETTING Set whether to enable or disable SNMP. VERSION Set the version of the SNMP to be supported. COMMUNITY NAME 1 to 3 Set the name of the community required for the access. USER 1 to 3 Set the us...
Page 50 - Troubleshooting
50 E Troubleshooting If you are experiencing any problem with your display, before calling for service, please review the following troubleshooting tips. There is no picture or sound. • Is the power cord disconnected? (See page 14.)• Is the main power switch off? (See page 16.)• Is the monitor in st...
Page 52 - Product Specifications
52 E Specifications n Product Specifications Model PN-E602 LCD component 60" Class [60-1/16 inch (152.5cm) diagonal] TFT LCD Max. resolution (pixels) 1920 x 1080 Max. colors Approx. 1.06 billion colors Pixel pitch 0.692 mm (H) × 0.692 mm (V) Viewing angle 176° right/left/up/down (contrast ratio ...
Page 55 - PC/AV HDMI input terminal pins; RS-232C input terminal pins; RS-232C output terminal pins
55 E Specifications n PC/AV DVI-D input terminal pins (DVI-D 24 pin) No. Function No. Function 1 TMDS data 2- 13 N.C. 2 TMDS data 2+ 14 +5V 3 TMDS data 2/4 shield 15 GND 4 N.C. 16 Hot-plug detection 5 N.C. 17 TMDS data 0- 6 DDC clock 18 TMDS data 0+ 7 DDC data 19 TMDS data 0/5 shield 8 N.C. 20 N.C. ...
Page 56 - Mounting Precautions
56 E • When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people.• Be sure to use a wall-mount bracket designed or designated for mounting the monitor.• This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessa...
