Sennheiser HSP 2 - Manual - manualsarea.com

Page 2 - Contents

1 Contents HSP 2/HSP 4 .................................................................................. 2Features.......................................................................................... 2Delivery includes........................................................................... ...

Page 3 - Features

2 HSP 2/HSP 4 High-quality back-electret condenser headmics, designed for professional “hands free” applications. The adjustable neckband is visually unobtrusive and very comfortable to wear. The 12 available HSP variants differ in pick-up pattern, colour and connector. There are two pick-up pattern...

Page 4 - Delivery includes; Boom microphone; Attaching the microphone boom

3 Delivery includes y Boom microphone y Neckband y Neckband connecting cable y Plastic transport case, foam-lined with cut-outs y Instructions for use y Warranty Certificate Attaching the microphone boom The neckband has two holders which are designed so that the microphone booms can be worn on eith...

Page 6 - Changing the microphone

5 Changing the microphone The connection between the microphone boom and the microphone cable ist very tight. To loosen this connection, in-sert your fingernail into the join and then pull the connector and the socket apart as shown. Note: When pulling apart, make sure you hold the thick end of the ...

Page 7 - Positioning the microphone capsule (HSP 2)

6 Positioning the microphone capsule (HSP 2) It is best to keep the micropho-ne capsule at the side of the mouth to minimise the risk of popping noises caused by plosi-ves from the mouth. To position the microphone capsule, push the microphone boom backwards or forwards in the holder. To adjust the ...

Page 8 - Positioning the microphone capsule (HSP 4)

7 Positioning the microphone capsule (HSP 4) The microphone capsule has a cardioid pick-up pattern and is best placed directly at the corner of the mouth. Note: Do not position the micro-phone directly in front of your mouth as it will pick up your breathing and plosive noises from your mouth. Make ...

Page 9 - Accessories; Replacement parts for HSP 2

8 Accessories The following accessories and/or replacement parts are available for the HSP 2 / HSP 4: Replacement parts for HSP 2 Part Cat. No. Neckband with two holders, anthracite 511709 Neckband with two holders, beige 511710 Omni-directional boom microphone, beige 511711 Omni-directional boom mi...

Page 10 - Set of holders, anthracite

9 Replacement parts for HSP 4 Part Cat. No. Neckband with two holders, anthracite 511709 Neckband with two holders, beige 511710 Cardioid boom microphone, beige 511713 Cardioid boom microphone, anthracite 511714 Cardioid boom microphone HSP-M, anthracite 515282 Cardioid boom microphone HSP-M, beige ...

Page 11 - Overview of product variants; sp

10 Overview of product variants Feature Microphone (Cat. No.) 3-pin screw sp ec ial co nn e ct o r ew 3 .5mm l o ck abl e mini-ja ck Open-ended cabl e Pla tinum cable Fl exi b le g oos eneck Anthracite Be ig e HSP 2 (009862) √ √ √ HSP 2-3 (009863) √ √ √ HSP 2-ew (009866) √ √ HSP 2-ew-3 (009872) √ √ ...

Page 12 - Specifications; Specifications HSP 2

11 Specifications Specifications HSP 2 Frequency response 20 − 20,000 Hz ±3 dB Pick-up pattern omni-directional Nominal impedance (1 kHz) 1 k Ω Min. terminating impedance 4.7 k Ω Sensitivity 2 mV/Pa ± 3 dB Diametre of mic capsule 4.8 mm Max. sound pressure level 150 dB Equivalent noise level 28 dB (...

Page 16 - Manufacturer declarations; Warranty; CE Declaration of Conformity

15 Manufacturer declarations Warranty 2 years CE Declaration of Conformity This equipment is in compliance with the essential requirements and other relevant provisions of Directives 1999/5/EC, 89/336/EC or 73/23/EC. The declaration is available on the internet site at www.sennheiser.com. Before put...

Sennheiser HSP 2 - Manual

Table of Contents:

Summary

Other Sennheiser Models