SEL SEL-2600 - User Manual
SEL SEL-2600 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Initial Checkout; Connect Terminal 26 to an appropriate ground.
- Page 3 – Installation
- Page 4 – SEL-701 Motor Relay Application; Table; Motor
- Page 6 – Use the SEL-2600 RTD Module in combination with the SEL-2030 Commu-; Receive Temperature Data
- Page 8 – Store Temperature Data in SEL-2030 Memory; Use the SET A command to reserve memory.; Perform Temperature Threshold Comparisons; The example SEL-2030 settings shown below compare the measured; Line 1: Stores the temperature threshold in register 033h.
- Page 9 – Line 5: Clears Bit 0 of 35h if RTD is shorted.; Table 2
- Page 10 – Issue Control Commands to Relay; Use the SET P command to set AUTO_CONFIG to “Y.” This enables auto-
- Page 11 – Data Packet Definition
- Page 12 – SEL-2600 Guideform Specifications; Module shall accept a single contact input.
- Page 13 – Wiring Diagram; CT INPUT
- Page 14 – Mechanical Diagram; Top View
- Page 15 – Specifications
- Page 16 – Notes
Date Code 20000525
SEL-2600 RTD Module
SEL-2600 RTD Module
Instruction Manual
Features & Benefits
Transmit 12 RTD-based temperature measurements and a single contact status
up to 500 meters using inexpensive fiber-optic cable with the SEL-2600 RTD
Module. The SEL-2600 connects directly to the SEL-701 Motor Relay using fiber-
optic connectors built into each device and also connects to the SEL-2030 Commu-
nications Processor using a single SEL-2800 Fiber-Optic Transceiver. The fiber-
optic link eliminates expensive cable pulls and provides electrical noise immunity
and ground isolation.
➤
Measure up to 12 RTD temperatures plus one contact input with
zero settings.
➢
100-ohm platinum
➢
100-ohm nickel
➢
120-ohm nickel
➢
10-ohm copper
➤
LEDs indicate device status, transmit status, and contact
input status.
➤
Power from 120 Vac or 240 Vac.
➤
Operates in extreme ambient temperatures from – 40º to +85º C .
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- SEL
- Model
- SEL-2600
- Document type
- User Manual
- Language(s)
- English
- Pages
- 16
- Format
Summary
SEL-2600 RTD Module Date Code 20000525 Initial Checkout 2 Initial Checkout Step 1. Connect Terminal 26 to an appropriate ground. Step 2. Apply line power to the SEL-2600 at Terminals 23 and 24 (120 Vac) or Terminals 23 and 25 (240 Vac). The SEL-2600 will power up and perform internal diagnostics. Th...
Date Code 20000525 SEL-2600 RTD Module Installation 3 Installation Step 1. Locate an appropriate mounting panel or enclosure near the protected device. Step 2. Drill four mounting holes (see Figure 6 on page 14). Step 3. Secure the SEL-2600 using the four bolts and locknuts provided. Step 4. Ground ...
SEL-2600 RTD Module Date Code 20000525 SEL-701 Motor Relay Application 4 Table 1 RTD Typ e an d Lo ca tion Works hee t. SEL-701 Motor Relay Application The SEL-701 Motor Relay provides comprehensive motor protection, includ- ing short circuit, load loss, load jam, and frequent starting protection as...
