SEL SEL-2505 - User Manual
SEL SEL-2505 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Product Overview; Figure 1
- Page 3 – Applications
- Page 4 – control equations to issue a bus; message to the protective relays through the; Figure 6
- Page 5 – Functional Description; Figure 7; messages, checks that the receive address matches that set by; The encoder converts the eight-contact inputs into the M; Figure 7; Encode; co
- Page 6 – Table 2 on page 7; Figure 8; Table 2; Function
- Page 7 – Figure 8 on page 6
- Page 8 – Step 2. Connect the chassis ground terminal of the SEL-2505 to
- Page 9 – Step 6. Apply rated voltage to IN1 on one device. The IN1 LED; SEL-2505 Operating Time Performance Diagram; Figure 9
- Page 10 – Mechanical Diagram
- Page 11 – Specifications
- Page 12 – SCHWEITZER ENGINEERING LABORATORIES; Notes
Date Code 20010214
SEL-2505 Remote I/O Module
SEL-2505 Remote I/O Module
Instruction Manual
The SEL-2505 is a remote I/O module
that has eight contact inputs and eight
contact outputs. The status of these
inputs and outputs are communicated
between the SEL-2505 and host device
using M
IRRORED
B
ITS
™ communica-
tions over a dedicated fiber-optic port.
Each contact input controls one of the
eight M
IRRORED
B
ITS
transmit bits,
while each of the eight received
M
IRRORED
B
ITS
controls a Form C
output contact. Use the transmitted
contact input status for control and
indication of a remote device.
Communications Ability
helps you simplify and
improve existing or new
installations.
Add bus protection using
existing relay contact
inputs and outputs.
Add simple pilot
communications to existing two- or three-terminal line applications.
Isolate relay and breaker dc supplies for breaker failure trip distribution schemes.
Replace control wiring to outside cabinets with fiber to reduce dc ground exposure.
Add local or remote trip and close coil monitoring capabilities.
Compact Size
permits panel-mount replacement of existing auxiliary relays.
Self-Testing
increases reliability of auxiliary relay functions.
Simple Diagnostics
consisting of 22 LEDs that indicate contact input, output, channel, and
device status.
Fiber Optics and Channel Monitoring
increase scheme security.
Three Models
provide a wide range of applicable communication paths: 650 nm multimode
fiber for communications paths
≤
500 m, 850 nm multimode fiber for paths
≤
15 km, or 1300 nm
single-mode fiber for paths
≤
80 km.
Fast Operating Speed
compares with high-speed auxiliary relays.
Features, Benefits, and Applications
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- SEL
- Model
- SEL-2505
- Document type
- User Manual
- Language(s)
- English
- Pages
- 12
- Format
Summary
2 SEL-2505 Remote I/O Module Date Code 20010214 Product Overview Product Overview Figure 1 shows the functional overview of the SEL-2505. The SEL-2505 is an excellent auxiliary relay or a simple way ofexpanding the number of I/O points available in a system of relays. Itis superior to hard-wiring re...
3 Date Code 20010214 SEL-2505 Remote I/O Module Applications Applications Figure 2 Channel Interface I/O for Relays Without Native M IRRORED B IT Protocol. Figure 3 Provide Communications-Assisted Tripping Over Existing Digital Communications Networks. f Figure 4 Interface Relays with M IRRORED B IT...
4 SEL-2505 Remote I/O Module Date Code 20010214 Applications f Figure 5 Reduce Wiring From Control House to Outdoor Cabinets. Example Distribution Bus Protection: Radial Feeders Figure 6 shows an SEL-2505 application using existing distribution relays and a SEL-2100 Protection Logic Processor to pro...
