Page 2 - Document Revision History; Revision
© 2014 Seagate Technology LLC. All rights reserved.Publication number: 100742811, Rev. D May 2014Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Seagate Ultra Mobile SSHD and SeaTools are either trademarks...
Page 3 - SSHD P; ONTENTS; ATA I
S EAGATE U LTRA M OBILE SSHD P RODUCT M ANUAL , R EV . D III C ONTENTS S EAGATE T ECHNOLOGY S UPPORT S ERVICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.0 I NTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 4 - ATA D
S EAGATE U LTRA M OBILE SSHD P RODUCT M ANUAL , R EV . D IV C ONTENTS 5.7 A UTHENTICATED F IRMWARE D OWNLOAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 5.8 P OWER R EQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 5 - IGURES; SATA C
S EAGATE U LTRA M OBILE SSHD P RODUCT M ANUAL , R EV . D V F IGURES F IGURE 1 T YPICAL 5V S TARTUP AND O PERATION C URRENT P ROFILE FOR 8GB MODELS . . . . . . . . . . . . . . 8 F IGURE 2 T YPICAL 5V S TARTUP AND O PERATION C URRENT P ROFILE FOR 16GB MODELS . . . . . . . . . . . . . 8 F IGURE 3 A TTA...
Page 6 - Seagate Technology Support Services
Seagate Ultra Mobile SSHD Product Manual, Rev. D 1 For information regarding online support and services, visit: http://www.seagate.com/about/contact-us/technical-support/ Available services include: • Presales & Technical support • Global Support Services telephone numbers & business hours ...
Page 7 - NTRODUCTION; About FIPS
S EAGATE U LTRA M OBILE SSHD P RODUCT M ANUAL , R EV . D 2 1.0 I NTRODUCTION This manual describes the functional, mechanical and interface specifications for the following Seagate ® Ultra Mobile SSHD model drives: For more information on FIPS 140-2 Level 2 certification see About FIPS on page 17. F...
Page 8 - NTERFACE
S EAGATE U LTRA M OBILE SSHD P RODUCT M ANUAL , R EV . D 3 1.1 A BOUT THE S ERIAL ATA I NTERFACE The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages include: Easy installation and configuration with true plug-and-play connectiv...
Page 9 - convenience, the phrases; Table 1
S EAGATE U LTRA M OBILE SSHD P RODUCT M ANUAL , R EV . D 4 D RIVE S PECIFICATIONS 2.0 D RIVE S PECIFICATIONS Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this ma...
Page 10 - LBA mode; where; Configuring and Mounting the Drive; addressing support of drives with capacities over 137 GB.
S EAGATE U LTRA M OBILE SSHD P RODUCT M ANUAL , R EV . D 5 D RIVE S PECIFICATIONS 2.1 F ORMATTED C APACITY F ORMATTED C APACITY (1) 1. One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. G UARANTEED S ...
Page 11 - Drive model; All models; Table 2; Read
S EAGATE U LTRA M OBILE SSHD P RODUCT M ANUAL , R EV . D 6 D RIVE S PECIFICATIONS 2.2 P HYSICAL ORGANIZATION Drive model Read/write heads Number of discs All models 2 1 2.3 R ECORDING AND I NTERFACE T ECHNOLOGY Recording method Perpendicular Recording density 1885 Kb/in Track density 366 ktracks/in ...
Page 12 - Table 3; Typical; Figure 3; Power requirements for the drives are listed in the table in; Table 4; Table 4; Write average
S EAGATE U LTRA M OBILE SSHD P RODUCT M ANUAL , R EV . D 7 D RIVE S PECIFICATIONS 2.6 S TART / STOP TIMES Table 3 Start/stop times Typical seek times (ms) Typical Max @ 25 ° C Power-on to ready (sec) 3.4 3.6 Standby to ready (sec) 2.5 3.0 2.7 P OWER S PECIFICATIONS The drive receives DC power (+5V) ...
Page 13 - Typical current profiles; The typical 5V startup and operation current profile is shown in; Figure 1
S EAGATE U LTRA M OBILE SSHD P RODUCT M ANUAL , R EV . D 8 D RIVE S PECIFICATIONS 2.7.1.1 Typical current profiles The typical 5V startup and operation current profile is shown in Figure 1 . Figure 1 Typical 5V Startup and Operation Current Profile for 8GB models Figure 2 Typical 5V Startup and Oper...
Page 14 - drive buffer is enabled, the
S EAGATE U LTRA M OBILE SSHD P RODUCT M ANUAL , R EV . D 9 D RIVE S PECIFICATIONS 2.7.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 15-ohm resistive load on the +5 volt line. Using 5-volt power, the drive is expected to operate with a maximum...
Page 15 - Shock; Table 5: Environmental specifications
S EAGATE U LTRA M OBILE SSHD P RODUCT M ANUAL , R EV . D 10 D RIVE S PECIFICATIONS 2.8 E NVIRONMENTAL S PECIFICATIONS This section provides the temperature, humidity, shock, and vibration specifications for Seagate Ultra Mobile SSHD drives. Ambient temperature is defined as the temperature of the en...
Page 16 - Vibration; document are specified below.; Nonoperating vibration; COUSTICS; Table 6
S EAGATE U LTRA M OBILE SSHD P RODUCT M ANUAL , R EV . D 11 D RIVE S PECIFICATIONS 2.8.2 Vibration All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive mounting screws. Vibration may be applied in the X, Y, or Z axis. 2.8.2.1 Operating ...
Page 17 - ELIABILITY; Table 7
S EAGATE U LTRA M OBILE SSHD P RODUCT M ANUAL , R EV . D 12 D RIVE S PECIFICATIONS 2.10 E LECTROMAGNETIC I MMUNITY When properly installed in a representative host system, the drive operates without errors or degradation in performance when subjected to the radio frequency (RF) environment as define...
Page 18 - Korean RRL
S EAGATE U LTRA M OBILE SSHD P RODUCT M ANUAL , R EV . D 13 D RIVE S PECIFICATIONS 2.12 A GENCY C ERTIFICATION 2.12.1 Safety certification These products are certified to meet the requirements of UL60950-1, CSA60950-1 and EN60950 and so marked as to the certify agency. 2.12.2 Electromagnetic Compati...
Page 20 - ONFIGURING AND; Serial ATA Cables and Connectors; Table 8; for connector pin definitions.; Figure 3 Attaching SATA Cabling; CAUTION; drive’s exposure to ESD.
S EAGATE U LTRA M OBILE SSHD P RODUCT M ANUAL , R EV . D 15 3.0 C ONFIGURING AND M OUNTING THE D RIVE This section contains the specifications and instructions for configuring and mounting the drive. 3.1 H ANDLING AND S TATIC -D ISCHARGE P RECAUTIONS After unpacking, and before installation, the dri...
Page 21 - Figure 4; for drive; Figure 4 Mounting Dimensions (for standard models); Top cover stiffness/deflection; mechanical damage, or hard errors; For reference only. May not represent actual drive.
S EAGATE U LTRA M OBILE SSHD P RODUCT M ANUAL , R EV . D 16 C ONFIGURING AND M OUNTING THE D RIVE 3.3 D RIVE M OUNTING Users can mount the drive in any orientation using four screws in the side-mounting holes. Refer to Figure 4 for drive mounting dimensions. Follow these important mounting precautio...
Page 22 - BOUT; FIPS
S EAGATE U LTRA M OBILE SSHD P RODUCT M ANUAL , R EV . D 17 4.0 A BOUT FIPS The Federal Information Processing Standard (FIPS) Publication 140-2, FIPS PUB 140-2, is a U.S. government computer security standard used to accredit cryptographic modules. It is titled “Security Requirements for Cryptograp...
Page 23 - TCG Storage Architecture Core Specification, Version 2.0
S EAGATE U LTRA M OBILE SSHD P RODUCT M ANUAL , R EV . D 18 A BOUT (SED) S ELF -E NCRYPTING D RIVES 5.0 A BOUT (SED) S ELF -E NCRYPTING D RIVES Self-encrypting drives (SEDs) offer encryption and security services for the protection of stored data, commonly known as "protection of data at rest.&#...
Page 24 - Erase; SP
S EAGATE U LTRA M OBILE SSHD P RODUCT M ANUAL , R EV . D 19 A BOUT (SED) S ELF -E NCRYPTING D RIVES 5.3 R ANDOM N UMBER G ENERATOR (RNG) The drive has a 32-byte hardware RNG that it is uses to derive encryption keys or, if requested to do so, to provide random numbers to the host for system use, inc...
Page 25 - the IORDY signal to provide reliable high-speed data transfers.
S EAGATE U LTRA M OBILE SSHD P RODUCT M ANUAL , R EV . D 20 S ERIAL ATA (SATA) I NTERFACE 6.0 S ERIAL ATA (SATA) I NTERFACE These drives use the industry-standard Serial ATA interface that supports FIS data transfers. It supports ATA programmed input/output (PIO) modes 0–4; multiword DMA modes 0–2, ...
Page 26 - Power
S EAGATE U LTRA M OBILE SSHD P RODUCT M ANUAL , R EV . D 21 S ERIAL ATA (SATA) I NTERFACE 6.2 S ERIAL ATA D EVICE P LUG C ONNECTOR P IN D EFINITIONS Table 8 summarizes the signals on the Serial ATA interface and power connectors. Refer to the Notes below. N OTES 1 All pins are in a single row, with ...
Page 27 - ATA C; OMMANDS; the; Table 9; ATA-standard commands names
S EAGATE U LTRA M OBILE SSHD P RODUCT M ANUAL , R EV . D 22 S ERIAL ATA (SATA) I NTERFACE 6.3 S UPPORTED ATA C OMMANDS Table 9 lists Serial ATA standard commands that the drive supports. For a detailed description of the ATA commands, refer to the Serial ATA International Organization: Serial ATA (R...
Page 28 - ATA-standard security commands
S EAGATE U LTRA M OBILE SSHD P RODUCT M ANUAL , R EV . D 23 S ERIAL ATA (SATA) I NTERFACE S.M.A.R.T. Enable Operations B0h/D8h S.M.A.R.T. Enable/Disable Auto Offline B0h/DBh S.M.A.R.T. Enable One Attribute Modification B0h/E0h S.M.A.R.T. Execute Offline B0h/D4h S.M.A.R.T. Free Fall Protection Host I...
Page 29 - Identify Device command; The Identify Device command (command code EC; Drive; on page 4 for default parameter settings.; Table 10 Identify Device command; Word; xxxx
S EAGATE U LTRA M OBILE SSHD P RODUCT M ANUAL , R EV . D 24 S ERIAL ATA (SATA) I NTERFACE 6.3.1 Identify Device command The Identify Device command (command code EC H ) transfers information about the drive to the host following power up. The data is organized as a single 512-byte block of data, who...
Page 31 - Table 11 Bit Descriptions
S EAGATE U LTRA M OBILE SSHD P RODUCT M ANUAL , R EV . D 26 S ERIAL ATA (SATA) I NTERFACE 100–103 Total number of user-addressable LBA sectors available (see Section 3.2 for related information) These words are required for drives that support the 48-bit addressing feature. Maximum value: 0000FFFFFF...
Page 33 - Set Features command; look-ahead and write caching features enabled.; Table 12 Set Features command values
S EAGATE U LTRA M OBILE SSHD P RODUCT M ANUAL , R EV . D 28 S ERIAL ATA (SATA) I NTERFACE 6.3.2 Set Features command This command controls the implementation of various features that the drive supports. When the drive receives this command, it sets BSY, checks the contents of the Features register, ...
Page 34 - If an appropriate code is not written to the Features Register, the
S EAGATE U LTRA M OBILE SSHD P RODUCT M ANUAL , R EV . D 29 S ERIAL ATA (SATA) I NTERFACE 6.3.3 S.M.A.R.T. commands S.M.A.R.T. provides near-term failure prediction for disk drives. When S.M.A.R.T. is enabled, the drive monitors predetermined drive attributes that are susceptible to degradation over...
Page 35 - NDEX; UMERICS
S EAGATE U LTRA M OBILE SSHD P RODUCT M ANUAL , R EV . D 30 I NDEX N UMERICS 32-byte Data Encryption Key 18 32-byte hardware RNG 19 A acoustics 11 active mode 9 Address 22 Admin SP 18 AES-256 18 agency certification 13 ambient temperature 6 areal density 6 ATA commands 22 ATA Enhanced Security 18 Au...
Page 38 - Seagate Technology LLC
Seagate Technology LLC AMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000 ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888EUROPE, MIDDLE EAST AND AFRICA Se...
