Page 2 - © 2013 Seagate Technology LLC. All rights reserved.; Document Revision History; Revision
© 2013 Seagate Technology LLC. All rights reserved. Publication number: 100715053, Rev. C September 2013 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Seagate Laptop Ultrathin HDD and SeaTools are either...
Page 3 - HDD SATA P; ONTENTS; ATA I
S EAGATE L APTOP U LTRATHIN HDD SATA P RODUCT M ANUAL , R EV . C III C ONTENTS S EAGATE T ECHNOLOGY S UPPORT S ERVICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.0 I NTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 4 - IGURES; SATA C
S EAGATE L APTOP U LTRATHIN HDD SATA P RODUCT M ANUAL , R EV . C IV F IGURES F IGURE 1 T YPICAL 5V S TARTUP AND O PERATION C URRENT P ROFILE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 F IGURE 2 A TTACHING SATA C ABLING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 5 - Seagate Technology Support Services
Seagate Laptop Ultrathin HDD SATA Product Manual, Rev. C 1 For information regarding online support and services, visit http://www.seagate.com/about/contact-us/technical-support/ Available services include: • Presales & Technical support • Global Support Services telephone numbers & business...
Page 6 - NTRODUCTION; Standard models
S EAGATE L APTOP U LTRATHIN HDD SATA P RODUCT M ANUAL , R EV . C 2 1.0 I NTRODUCTION This manual describes the functional, mechanical and interface specifications for the following Seagate ® Laptop Ultrathin HDD SATA model drives: These drives provide the following key features: 5400-RPM spindle s...
Page 7 - BOUT THE; NTERFACE
S EAGATE L APTOP U LTRATHIN HDD SATA P RODUCT M ANUAL , R EV . C 3 1.1 A BOUT THE S ERIAL ATA I NTERFACE The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages include: Easy installation and configuration with true plug-and-play c...
Page 8 - RIVE; the drive; Drive Specification
S EAGATE L APTOP U LTRATHIN HDD SATA P RODUCT M ANUAL , R EV . C 4 D RIVE S PECIFICATIONS 2.0 D RIVE S PECIFICATIONS Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout...
Page 9 - ORMATTED; LBA mode; HYSICAL ORGANIZATION; Drive model; Vibration, nonoperating
S EAGATE L APTOP U LTRATHIN HDD SATA P RODUCT M ANUAL , R EV . C 5 D RIVE S PECIFICATIONS 2.1 F ORMATTED C APACITY F ORMATTED C APACITY (1) 1. One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. G UARA...
Page 10 - Table 2; Typical; All models; Table 1; Read
S EAGATE L APTOP U LTRATHIN HDD SATA P RODUCT M ANUAL , R EV . C 6 D RIVE S PECIFICATIONS 2.3 R ECORDING AND I NTERFACE T ECHNOLOGY Recording method Perpendicular Recording density 1885 Kb/in Track density 366 ktracks/in avg Areal density 690 Gb/in 2 avg Spindle speed 5400 RPM +/- 0.2% Sustained dat...
Page 11 - Figure 2; Table 3; OWER; Seek average
S EAGATE L APTOP U LTRATHIN HDD SATA P RODUCT M ANUAL , R EV . C 7 D RIVE S PECIFICATIONS 2.7 P OWER S PECIFICATIONS The drive receives DC power (+5V) through a native SATA power connector (refer to Figure 2 ). 2.7.1 Power consumption Power requirements for the drives are listed in the table below. ...
Page 12 - Typical current profiles; The typical 5V startup and operation current profile is shown in
S EAGATE L APTOP U LTRATHIN HDD SATA P RODUCT M ANUAL , R EV . C 8 D RIVE S PECIFICATIONS 2.7.1.1 Typical current profiles The typical 5V startup and operation current profile is shown in Figure 1 . Figure 1 Typical 5V Startup and Operation Current Profile
Page 13 - drive buffer is enabled, the heads are parked and the spindle is at; OWER MODES
S EAGATE L APTOP U LTRATHIN HDD SATA P RODUCT M ANUAL , R EV . C 9 D RIVE S PECIFICATIONS 2.7.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 15-ohm resistive load on the +5 volt line. Using 5-volt power, the drive is expected to operate with a...
Page 14 - NVIRONMENTAL; Parameters
S EAGATE L APTOP U LTRATHIN HDD SATA P RODUCT M ANUAL , R EV . C 10 D RIVE S PECIFICATIONS 2.8 E NVIRONMENTAL S PECIFICATIONS This section provides the temperature, humidity, shock, and vibration specifications for Momentus drives. Ambient temperature is defined as the temperature of the environment...
Page 15 - COUSTICS; Table 4
S EAGATE L APTOP U LTRATHIN HDD SATA P RODUCT M ANUAL , R EV . C 11 D RIVE S PECIFICATIONS 2.9 A COUSTICS Drive emission of sound is measured consistent with the ECMA-74 and its referenced standards. Testing is conducted at room temperature (approximately 25°C). Emission levels are reported as the t...
Page 16 - ELIABILITY; Nonrecoverable read errors; GENCY; Safety certification; Trade name or applicant:; FCC verification
S EAGATE L APTOP U LTRATHIN HDD SATA P RODUCT M ANUAL , R EV . C 12 D RIVE S PECIFICATIONS 2.11 R ELIABILITY Nonrecoverable read errors 1 per 10 14 bits read, max Load/Unload (U/UL) 25°C, 50% relative humidity 600,000 software-controlled power on/off cycles20,000 hard power on/off cycles Warranty To...
Page 17 - Reorient the receiving antenna.; China Restriction of Hazardous Substances (RoHS) Directive; ORROSIVE
S EAGATE L APTOP U LTRATHIN HDD SATA P RODUCT M ANUAL , R EV . C 13 D RIVE S PECIFICATIONS Reorient the receiving antenna. Move the device to one side or the other of the radio or TV. Move the device farther away from the radio or TV. Plug the computer into a different outlet so that the rec...
Page 18 - ONFIGURING AND; Serial ATA Cables and Connectors; for; CAUTION; drive’s exposure to ESD.
S EAGATE L APTOP U LTRATHIN HDD SATA P RODUCT M ANUAL , R EV . C 14 C ONFIGURING AND M OUNTING THE D RIVE 3.0 C ONFIGURING AND M OUNTING THE D RIVE This section contains the specifications and instructions for configuring and mounting the drive. 3.1 H ANDLING AND S TATIC -D ISCHARGE P RECAUTIONS Aft...
Page 19 - Top cover stiffness/deflection
S EAGATE L APTOP U LTRATHIN HDD SATA P RODUCT M ANUAL , R EV . C 15 3.3 D RIVE M OUNTING Mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes. Refer to Figure 3 for drive mounting dimensions. Follow these important mounting preca...
Page 20 - ERIAL; Serial ATA: High Speed Serialized AT Attachment; ATA D; Notes; Table 5
S EAGATE L APTOP U LTRATHIN HDD SATA P RODUCT M ANUAL , R EV . C 16 S ERIAL ATA (SATA) I NTERFACE 4.0 S ERIAL ATA (SATA) I NTERFACE These drives use the industry-standard Serial ATA interface that supports FIS data transfers. It supports ATA programmed input/output (PIO) modes 0–4; multiword DMA mod...
Page 21 - UPPORTED; ATA C; OMMANDS; ATA-standard commands names
S EAGATE L APTOP U LTRATHIN HDD SATA P RODUCT M ANUAL , R EV . C 17 N OTES 1 All pins are in a single row, with a 1.27 mm (0.050 in) pitch. 2 The comments on the mating sequence apply to the case of backplane blindmate connector only. In this case, the mating sequences are: • the ground pins P4 and ...
Page 22 - Table 6
S EAGATE L APTOP U LTRATHIN HDD SATA P RODUCT M ANUAL , R EV . C 18 S ERIAL ATA (SATA) I NTERFACE Set Features EFh Set Max Address F9h Note: Individual Set Max commands are identified by the value placed in the Set Max Features register as defined to the right. Address: Password: Lock: Unlock: Freez...
Page 23 - Drive Specifications; on page 4; Table 7
S EAGATE L APTOP U LTRATHIN HDD SATA P RODUCT M ANUAL , R EV . C 19 S ERIAL ATA (SATA) I NTERFACE 4.3.1 Identify Device command The Identify Device command (command code EC H ) transfers information about the drive to the host following power up. The data is organized as a single 512-byte block of d...
Page 24 - Word
S EAGATE L APTOP U LTRATHIN HDD SATA P RODUCT M ANUAL , R EV . C 20 S ERIAL ATA (SATA) I NTERFACE 51 PIO data-transfer cycle timing mode 0200 H 52 Retired 0200 H 53 Words 54–58, 64–70 and 88 are valid 0007 H 54 Number of current logical cylinders xxxx H 55 Number of current logical heads xxxx H 56 N...
Page 25 - xxxx; Bit
S EAGATE L APTOP U LTRATHIN HDD SATA P RODUCT M ANUAL , R EV . C 21 S ERIAL ATA (SATA) I NTERFACE 93 Hardware reset value (see description following this table) xxxx H 94 Auto acoustic management setting xxxx H 95 Stream Min. Request Size 0000 H 96 Streaming Transfer Time - DMA 0000 H 97 Streaming A...
Page 27 - Set Features command; Table 8
S EAGATE L APTOP U LTRATHIN HDD SATA P RODUCT M ANUAL , R EV . C 23 S ERIAL ATA (SATA) I NTERFACE 4.3.2 Set Features command This command controls the implementation of various features that the drive supports. When the drive receives this command, it sets BSY, checks the contents of the Features re...
Page 28 - Draft; ODE IN FEATURES REGISTER
S EAGATE L APTOP U LTRATHIN HDD SATA P RODUCT M ANUAL , R EV . C 24 S ERIAL ATA (SATA) I NTERFACE 4.3.3 S.M.A.R.T. commands S.M.A.R.T. provides near-term failure prediction for disk drives. When S.M.A.R.T. is enabled, the drive monitors predetermined drive attributes that are susceptible to degradat...
Page 29 - NDEX
S EAGATE L APTOP U LTRATHIN HDD SATA P RODUCT M ANUAL , R EV . C 25 I NDEX A acoustics 11 active mode 9 Address 18 agency certification 12 ambient temperature 6 areal density 6 ATA commands 17 Australia/New Zealand Standard AS/NZS3548 1995 12 Australian Communication Authority (ACA) 12 Australian C-...
Page 32 - Seagate Technology LLC
Seagate Technology LLC AMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000 ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888EUROPE, MIDDLE EAST AND AFRICA Se...
