Page 2 - © 2014, Seagate Technology LLC All rights reserved.; Document Revision History; Revision
© 2014, Seagate Technology LLC All rights reserved. Publication number: 100384760, Rev. A February 2014 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in theUnited States and/or other countries. Seagate Surveillance HDD and SeaTools are either trade...
Page 3 - Contents
Seagate Surveillance HDD Product Manual, Rev. A Contents Seagate Technology Support Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 4 - Figures; Figure 1
Seagate Surveillance HDD Product Manual, Rev. A Figures Figure 1 Attaching SATA cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Figure 2 Mounting dimensions (3TB and 4TB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 5 - Seagate Technology Support Services
Seagate Surveillance HDD Product Manual, Rev. A 1 For information regarding online support and services, visit http://www.seagate.com/about/contact-us/technical-support/ Available services include: • Presales & Technical support • Global Support Services telephone numbers & business hours • ...
Page 6 - Introduction
Seagate Surveillance HDD Product Manual, Rev. A 2 1.0 Introduction This manual describes the functional, mechanical and interface specifications for the followingSeagate ® Surveillance HDD model drives: These drives provide the following key features: • Reliability for 24×7 video surveillance applic...
Page 7 - About the SATA interface; or other configuration options.
Seagate Surveillance HDD Product Manual, Rev. A 3 www.seagate.com Introduction 1.1 About the SATA interface The Serial ATA (SATA) interface provides several advantages over the traditional (parallel) ATA interface. Theprimary advantages include: • Easy installation and configuration with true plug-a...
Page 8 - Drive Specifications; the drive; Specification summary tables; The specifications listed in
Seagate Surveillance HDD Product Manual, Rev. A 4 2.0 Drive Specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power.For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following driv...
Page 10 - Formatted capacityy; Default logical geometry
Seagate Surveillance HDD Product Manual, Rev. A 6 www.seagate.com Drive Specifications 2.2 Formatted capacityy *One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. 2.2...
Page 11 - Physical characteristics; The start/stop times listed below are for 3TB and 4TB models.
Seagate Surveillance HDD Product Manual, Rev. A 7 www.seagate.com Drive Specifications 2.5 Physical characteristics 2.6 Seek time Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured usingdrive diagnostics. The specifications in the table below are defin...
Page 12 - Power specifications; Table 2; Avg 5V typ amps
Seagate Surveillance HDD Product Manual, Rev. A 8 www.seagate.com Drive Specifications 2.8 Power specifications The drive receives DC power (+5V or +12V) through a native SATA power connector. Refer to Figure 1 on page 15 . 2.8.1 Power consumption Power requirements for the drives are listed in Tabl...
Page 13 - Environmental specifications; Figure 2; Power modes
Seagate Surveillance HDD Product Manual, Rev. A 9 www.seagate.com Drive Specifications 2.8.3 Voltage tolerance Voltage tolerance (including noise): • 5V ±5% • 12V ±10% 2.8.4 Power-management modes The drive provides programmable power management to provide greater energy efficiency. In most systems,...
Page 15 - Operating vibration; Acoustics; Seek
Seagate Surveillance HDD Product Manual, Rev. A 11 www.seagate.com Drive Specifications 2.9.6.3 Operating vibration The maximum vibration levels that the drive may experience while meeting the performance standards specifiedin this document are specified below. All vibration specifications assume th...
Page 16 - Electromagnetic immunity; Table 4; AFR and Warranty; • 10,000 average motor start/stop cycles per year; Warranty; Test
Seagate Surveillance HDD Product Manual, Rev. A 12 www.seagate.com Drive Specifications 2.11 Electromagnetic immunity When properly installed in a representative host system, the drive operates without errors or degradation inperformance when subjected to the radio frequency (RF) environments define...
Page 17 - Korean RRL; • Certificate number: In process; Radio and television interference.; • Reorient the receiving antenna.
Seagate Surveillance HDD Product Manual, Rev. A 13 www.seagate.com Drive Specifications 2.14.2 Electromagnetic compatibility Hard drives that display the CE mark comply with the European Union (EU) requirements specified in theElectromagnetic Compatibility Directive (2004/108/EC) as put into place 2...
Page 18 - Environmental protection
Seagate Surveillance HDD Product Manual, Rev. A 14 www.seagate.com Drive Specifications 2.15 Environmental protection Seagate designs its products to meet environmental protection requirements worldwide, including regulationsrestricting certain chemical substances. 2.15.1 European Union Restriction ...
Page 19 - Configuring and Mounting the Drive; Handling and static-discharge precautions; • Handle the drive by its edges or frame; Configuring the drive; Table 5
Seagate Surveillance HDD Product Manual, Rev. A 15 www.seagate.com Configuring and Mounting the Drive 3.0 Configuring and Mounting the Drive This section contains the specifications and instructions for configuring and mounting the drive. 3.1 Handling and static-discharge precautions After unpacking...
Page 20 - Drive mounting; Figure 2
Seagate Surveillance HDD Product Manual, Rev. A 16 3.4 Drive mounting Users can mount the drive in any orientation using four screws in the side-mounting holes or four screws in thebottom-mounting holes. Refer to Figure 2 for drive mounting dimensions. Follow these important mounting precautions whe...
Page 21 - SATA Interface; Hot-Plug compatibility
Seagate Surveillance HDD Product Manual, Rev. A 17 www.seagate.com SATA Interface 4.0 SATA Interface These drives use the industry-standard Serial ATA (SATA) interface that supports FIS data transfers. It supportsATA programmed input/output (PIO) modes 0 to 4; multiword DMA modes 0 to 2, and Ultra D...
Page 22 - SATA device plug connector pin definitions; Notes; • All used voltage pins (V
Seagate Surveillance HDD Product Manual, Rev. A 18 4.2 SATA device plug connector pin definitions Table 5 summarizes the signals on the SATA interface and power connectors. Notes 1. All pins are in a single row, with a 1.27 mm (0.050 in) pitch. 2. The comments on the mating sequence apply to the cas...
Page 23 - Supported ATA commands
Seagate Surveillance HDD Product Manual, Rev. A 19 4.3 Supported ATA commands The following table lists SATA standard commands that the drive supports.For a detailed description of the ATA commands, refer to the Serial ATA International Organization:Serial ATA Revision 3.0 (http://www.sata-io.org). ...
Page 25 - The Identify Device command (command code EC; Word
Seagate Surveillance HDD Product Manual, Rev. A 21 www.seagate.com SATA Interface 4.3.1 Identify Device command The Identify Device command (command code EC H ) transfers information about the drive to the host following power up. The data is organized as a single 512-byte block of data, whose conte...
Page 27 - Bit
Seagate Surveillance HDD Product Manual, Rev. A 23 www.seagate.com SATA Interface 100–103 Total number of user-addressable LBA sectors available (see Section 2.2 for related information). These words are required for drives that support the 48-bit addressing feature. Maximum value: 0000FFFFFFFFFFFFh...
Page 30 - Draft; Code in features register
Seagate Surveillance HDD Product Manual, Rev. A 26 www.seagate.com SATA Interface 4.3.3 S.M.A.R.T. commands S.M.A.R.T. provides near-term failure prediction for disk drives. When S.M.A.R.T. is enabled, the drive monitorspredetermined drive attributes that are susceptible to degradation over time. If...
Page 31 - buffer 7; Index
Seagate Surveillance HDD Product Manual, Rev. A 27 A ACA 13acceleration 11acoustics 11Active 9Active mode 9AFR 12Agency certification 12altitude 10Ambient temperature 9ambient temperature 7, 8Annualized Failure Rate 12areal density 6ATA commands 19Australia/New Zealand Standard AS/NZ CISPR22 13Austr...
Page 32 - quick reference 4
28 Seagate Surveillance HDD Product Manual, Rev. A N noise 8nominal power 7Nonoperating shock 10Nonoperating vibration 11 O operating 8Operating power 8Operating shock 10Operating vibration 11 P Physical characteristics 8point-to-point 3, 15Power consumption 8power dissipation 8Power modes 9Power sp...
Page 34 - Seagate Technology LLC; Publication Number:
Seagate Technology LLC AMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888EUROPE, MIDDLE EAST AND AFRICA Sea...
