Page 2 - Document Revision History; Revision
© 2013 Seagate Technology LLC. All rights reserved. Publication number: 100722681, Rev. A February 2013 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Barracuda and SeaTools are either trademarks or regis...
Page 3 - Contents
Video 3.5 HDD Product Manual, Rev. A Contents Seagate Technology Support Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 5 - Figures; Figure 1
Video 3.5 HDD SATA Product Manual, Rev. A Figures Figure 1 Attaching SATA cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Figure 2 Mounting dimensions (3TB and 4TB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 7 - Seagate Technology Support Services
Video 3.5 HDD SATA Product Manual, Rev. A 7 For information regarding online support and services, visit http://www.seagate.com/www/en-us/about/ contact_us/ Available services include: • Presales & Technical support • Global Support Services telephone numbers & business hours • Authorized Se...
Page 9 - About the SATA interface
Video 3.5 HDD SATA Product Manual, Rev. A 9 1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate ® Video 3.5 HDD model drives: These drives provide the following key features: • 5900-RPM spindle speed • Supports Trusted Send/Receive...
Page 11 - Drive Specifications; the drive; Specification summary tables; The specifications listed in
Video 3.5 HDD SATA Product Manual, Rev. A 11 2.0 Drive Specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive mo...
Page 12 - Drive Specifications; Formatted capacity; Model
12 Video 3.5 HDD SATA Product Manual, Rev. A Drive Specifications www.seagate.com *All specifications above are based on native configurations. ** One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operat...
Page 13 - Default logical geometry
Video 3.5 HDD SATA Product Manual, Rev. A 13 www.seagate.com Drive Specifications 2.2.1 LBA mode When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where n is the number of guaranteed sectors as defined above . See Section 4.3.1, "Identify De...
Page 14 - Physical characteristics; Table 2; Note
14 Video 3.5 HDD SATA Product Manual, Rev. A Drive Specifications www.seagate.com 2.5 Physical characteristics 2.6 Seek time Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The specifications in the table below are defined a...
Page 15 - Avg 5V typ amps
Video 3.5 HDD SATA Product Manual, Rev. A 15 www.seagate.com Drive Specifications • Read/write power and current Read/write power is measured with the heads on track, based on a 16-sector write followed by a 32-ms delay,then a 16-sector read followed by a 32-ms delay. • Operating power and current O...
Page 16 - Power modes
16 Video 3.5 HDD SATA Product Manual, Rev. A Drive Specifications www.seagate.com 2.8.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the +12 volt line or an equivalent 15-ohm resistive load on the +5 volt line. • Using 1...
Page 17 - Environmental specifications; Figure 2
Video 3.5 HDD SATA Product Manual, Rev. A 17 www.seagate.com Drive Specifications activity is required, the drive makes a transition to Standby mode. In both Idle and Standby mode, the driveaccepts all commands and returns to Active mode when disk access is necessary. 2.9 Environmental specification...
Page 18 - Operating shock; Seek
18 Video 3.5 HDD SATA Product Manual, Rev. A Drive Specifications www.seagate.com 2.9.6 Shock All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws. Shock may be applied in the X, Y or Z axis. 2.9.6.1 Operating shock These drives...
Page 19 - Electromagnetic immunity; Table 4; Reliability - Annualized Failure Rate; Test
Video 3.5 HDD SATA Product Manual, Rev. A 19 www.seagate.com Drive Specifications 2.10.1 Test for Prominent Discrete Tones (PDTs) Seagate follows the ECMA-74 standards for measurement and identification of PDTs. An exception to this process is the use of the absolute threshold of hearing. Seagate us...
Page 20 - Agency certification; Korean RRL; • Certificate number: In process; Radio and television interference.; • Reorient the receiving antenna.
20 Video 3.5 HDD SATA Product Manual, Rev. A Drive Specifications www.seagate.com 2.14 Agency certification 2.14.1 Safety certification These products are certified to meet the requirements of UL60950-1, CSA60950-1 and EN60950 and so marked as to the certify agency. 2.14.2 Electromagnetic compatibil...
Page 21 - • Move the device farther away from the radio or TV.; Environmental protection
Video 3.5 HDD SATA Product Manual, Rev. A 21 www.seagate.com Drive Specifications • Move the device farther away from the radio or TV. • Plug the computer into a different outlet so that the receiver and computer are on different branch outlets. If necessary, you should consult your dealer or an exp...
Page 23 - Configuring and Mounting the Drive; Handling and static-discharge precautions; Caution; • Handle the drive by its edges or frame; Configuring the drive; Table 5
Video 3.5 HDD SATA Product Manual, Rev. A 23 3.0 Configuring and Mounting the Drive This section contains the specifications and instructions for configuring and mounting the drive. 3.1 Handling and static-discharge precautions After unpacking, and before installation, the drive may be exposed to po...
Page 24 - Configuring and Mounting the Drive; Attaching SATA cabling; Drive mounting
24 Video 3.5 HDD SATA Product Manual, Rev. A Configuring and Mounting the Drive www.seagate.com Figure 1 Attaching SATA cabling Each cable is keyed to ensure correct orientation. Video 3.5 HDD drives support latching SATA connectors. 3.4 Drive mounting You can mount the drive in any orientation usin...
Page 25 - Segment; Signal
Video 3.5 HDD SATA Product Manual, Rev. A 25 4.0 SATA Interface These drives use the industry-standard Serial ATA (SATA) interface that supports FIS data transfers. It supports ATA programmed input/output (PIO) modes 0 to 4; multiword DMA modes 0 to 2, and Ultra DMA modes 0 to 6. For detailed inform...
Page 26 - SATA Interface; • All used voltage pins (V; Supported ATA commands; Power
26 Video 3.5 HDD SATA Product Manual, Rev. A SATA Interface www.seagate.com Notes 1. All pins are in a single row, with a 1.27 mm (0.050 in) pitch. 2. The comments on the mating sequence apply to the case of backplane blindmate connector only. In this case, the mating sequences are: • the ground pin...
Page 27 - Command name
Video 3.5 HDD SATA Product Manual, Rev. A 27 www.seagate.com SATA Interface Download Microcode 92 H Execute Device Diagnostics 90 H Flush Cache E7 H Flush Cache Extended EA H Format Track 50 H Identify Device EC H Idle E3 H Idle Immediate E1 H Initialize Device Parameters 91 H Read Buffer E4 H Read ...
Page 29 - The Identify Device command (command code EC; Word
Video 3.5 HDD SATA Product Manual, Rev. A 29 www.seagate.com SATA Interface 4.3.1 Identify Device command The Identify Device command (command code EC H ) transfers information about the drive to the host following power up. The data is organized as a single 512-byte block of data, whose contents ar...
Page 31 - Bit
Video 3.5 HDD SATA Product Manual, Rev. A 31 www.seagate.com SATA Interface 92 Master password revision code FFFE H 93 Hardware reset value xxxx H 94 Automatic acoustic management 8080 H 95–99 ATA-reserved 0000 H 100–103 Total number of user-addressable LBA sectors available (see Section 2.2 for rel...
Page 34 - Draft; Code in features register
34 Video 3.5 HDD SATA Product Manual, Rev. A SATA Interface www.seagate.com 4.3.3 S.M.A.R.T. commands S.M.A.R.T. provides near-term failure prediction for disk drives. When S.M.A.R.T. is enabled, the drive monitors predetermined drive attributes that are susceptible to degradation over time. If self...
Page 35 - Index
Video 3.5 HDD SATA Product Manual, Rev. A 35 A ACA 20acceleration 18acoustics 18Active 16Active mode 16Agency certification 20altitude 17Ambient temperature 17ambient temperature 14areal density 13ATA commands 26Australia/New Zealand Standard AS/NZ CISPR22 20Australian Communication Authority (ACA) ...
Page 36 - quick reference 11
36 Video 3.5 HDD SATA Product Manual, Rev. A N noise 16nominal power 14Nonoperating shock 18Nonoperating vibration 18 O operating 15Operating power 15Operating shock 18Operating vibration 18 P Physical characteristics 14point-to-point 9, 23Power consumption 14power dissipation 15Power modes 16Power ...
Page 40 - Seagate Technology LLC; Publication Number:
Seagate Technology LLC AMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888EUROPE, MIDDLE EAST AND AFRICA Sea...
