Page 2 - Document Revision History; Revision
© 2014 Seagate Technology LLC. All rights reserved.Publication number: 100708406, Rev. C October 2014Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Seagate 1200 SSD and SeaTools are either trademarks or r...
Page 3 - ONTENTS
Seagate 1200 SSD Product Manual, Rev. C 2 C ONTENTS Seagate® Technology Support Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1.0 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 6 - IGURES
Seagate 1200 SSD Product Manual, Rev. C 5 F IGURES Figure 1. Current profiles for 800GB standard and 400GB High Endurance models . . . . . . . . . . . . . . . 36 Figure 2. Current profiles for 400GB standard and 200GB high endurance models . . . . . . . . . . . . . . . 37 Figure 3. Current profiles ...
Page 8 - Scope; This manual describes Seagate
Seagate 1200 SSD Product Manual, Rev. C 7 1.0 Scope This manual describes Seagate ® 1200 SSD (Serial Attached SCSI) drives. Seagate 1200 SSD drives support the SAS Protocol specifications to the extent described in this manual. The SAS Interface Manual (part number 100293071) describes the general S...
Page 9 - Applicable standards and reference documentation; Standards; SAS Interface Manual; Electromagnetic compatibility
Seagate 1200 SSD Product Manual, Rev. C 8 2.0 Applicable standards and reference documentation The drives documented in this manual have been developed as system peripherals to the highest standards of design and construction. The drives depend on host equipment to provide adequate power and environ...
Page 11 - Reference documents
Seagate 1200 SSD Product Manual, Rev. C 10 2.2 Reference documents SCSI Commands Reference Manual Seagate part number: 100293068 SAS Interface Manual Seagate part number: 100293071 ANSI SAS Documents SFF-8144 54mm x 78.5mm Form Factor with micro serial connector SFF-8223 2.5” Drive Form Factor with ...
Page 12 - General description; Standard features
Seagate 1200 SSD Product Manual, Rev. C 11 3.0 General description Seagate 1200 SSD drives provide high performance, high capacity data storage for a variety of systems with a Serial Attached SCSI (SAS) interface. The Serial Attached SCSI interface is designed to meet next-generation computing deman...
Page 14 - Safety and Regulatory Agency Specifications
Seagate 1200 SSD Product Manual, Rev. C 13 3.7 Factory-installed options OEMs may order the following items which are incorporated at the manufacturing facility during production or packaged before shipping. Some of the options available are (not an exhaustive list of possible options):• Other capac...
Page 15 - Drive Configuration
Seagate 1200 SSD Product Manual, Rev. C 14 In SCSI devices, umapped LBAs are defined as part of the Thin Provisioning model. Support of the Thin Provisioning model is indicated by the LBPME bit having a value of '1' in the READ CAPACITY (16) parameter data. When a region of LBA's are erased via cryp...
Page 16 - Performance characteristics
Seagate 1200 SSD Product Manual, Rev. C 15 4.0 Performance characteristics This section provides detailed information concerning performance-related characteristics and features of Seagate 1200 SSD drives. 4.1 Internal drive characteristics Flash Memory Type NAND MLC Emulated LBA Size 512, 520, 524,...
Page 17 - Table 3 Maximum FORMAT UNIT Times (minutes); Notes
Seagate 1200 SSD Product Manual, Rev. C 16 4.2.2 FORMAT UNIT command execution time for 512-byte LBA’s (minutes) The device may be formatted as either a Thin Provisioned device or a Fully Provisioned device. The default format is Thin Provisioned and is recommended for most applications. Thin Provis...
Page 19 - IOMeter is available at h
High Endurance 2.5” Models - Limited Warranty with Media Usage Notes ST400FM0093ST400FM0103 ST200FM0093ST200FM0103 ST100FM0093ST100FM0103 Maximum Burst Transfer Rate 1200MB/s Peak sequential 128KB read/write data transfer rate (MB/s max) [1] 750/500 750/400 Sustained sequential 128KB read/ write dat...
Page 21 - Reliability specifications
Seagate 1200 SSD Product Manual, Rev. C 20 5.0 Reliability specifications The following reliability specifications assume correct host and drive operational interface, including all interface timings, power supply voltages, environmental requirements and drive mounting constraints. Read Error Rates ...
Page 22 - The error rates stated in this manual assume the following:
Seagate 1200 SSD Product Manual, Rev. C 21 5.1 Error rates The error rates stated in this manual assume the following: • The drive is operated in accordance with this manual using DC power as defined in paragraph 6.3, "DC power require- ments." • Errors caused by host system failures are exc...
Page 23 - No routine scheduled preventive maintenance is required.
Seagate 1200 SSD Product Manual, Rev. C 22 5.2.5 Data Retention Data Retention is another major characteristic of SSD's that must be accounted for by all the algorithms that the SSD implements. While powered up, the Data Retention of SSD cells are monitored and rewritten if the cell levels decay to ...
Page 25 - some fundamental tests and scans portions of the media.; DST failure definition; Recovered errors will not be reported as diagnostic failures.
Seagate 1200 SSD Product Manual, Rev. C 24 Predictive failures S.M.A.R.T. signals predictive failures when the drive is performing unacceptably for a period of time. The firmware keeps a running count of the number of times the error rate for each attribute is unacceptable. To accomplish this, a cou...
Page 26 - The Self-Test Results Value field is set to Fh
Seagate 1200 SSD Product Manual, Rev. C 25 5.3.6.2 Implementation This section provides all of the information necessary to implement the DST function on this drive. 5.3.6.2.1 State of the drive prior to testing The drive must be in a ready state before issuing the SEND DIAGNOSTIC command. There are...
Page 28 - Physical/electrical specifications; Power specifications; • Peak operating mode; AC power requirements
Seagate 1200 SSD Product Manual, Rev. C 27 6.0 Physical/electrical specifications This section provides information relating to the physical and electrical characteristics of the drive. 6.1 Power specifications The 2.5” drive receives DC power (+5V and +12V) through the standard SAS interface. The 1...
Page 29 - DC power requirements; Parameter
Seagate 1200 SSD Product Manual, Rev. C 28 6.3 DC power requirements Table 4 800GB standard 2.5” model DC power requirements (Models ST800FM0013, ST800FM0023, ST800FM0033, ST800FM0043, ST800FM0053, ST800FM0063) Parameter 800GB (6.0Gb) Regulation [4] ±5% ±5% [2] Voltage +5V +12V [2] Current (A) Curre...
Page 40 - Power dissipation
Seagate 1200 SSD Product Manual, Rev. C 39 6.4 Power dissipation 800GB standard 2.5” models in 6Gb operation (Models ST800FM0013, ST800FM0023, ST800FM0033, ST800FM0043, ST800FM0053, ST800FM0063) Typical power dissipation under idle conditions in 6Gb operation is 3.74 watts (12.76 BTUs per hour). To ...
Page 44 - Images may not represent actual product, for reference only.
Seagate 1200 SSD Product Manual, Rev. C 43 6.5 Environmental limits Temperature and humidity values experienced by the drive must be such that condensation does not occur on any drive part. Altitude and atmospheric pressure specifications are referenced to a standard day at 58.7°F (14.8°C). Maximum ...
Page 45 - Relative humidity; The values below assume that no condensation on the drive occurs.; Shock and vibration; drives and integrated drives.
Seagate 1200 SSD Product Manual, Rev. C 44 6.5.2 Relative humidity The values below assume that no condensation on the drive occurs. a. Operating 5% to 95% non-condensing relative humidity with a maximum gradient of 20% per hour. b. Non-operating 5% to 95% non-condensing relative humidity. 6.5.3 Eff...
Page 46 - Figure 16. Recommended mounting; Image may not represent actual product, for reference only.; Vibration; b. Operating—abnormal
Seagate 1200 SSD Product Manual, Rev. C 45 Figure 16. Recommended mounting Note. Image may not represent actual product, for reference only. 6.5.4.2 Vibration a. Operating—normal The drive as installed for normal operation, shall comply with the complete specified performance while subjected to vibr...
Page 47 - lated drives and integrated drives.; Air cleanliness
Seagate 1200 SSD Product Manual, Rev. C 46 c. Non-operating The limits of non-operating vibration shall apply to all conditions of handling and transportation. This includes both iso- lated drives and integrated drives. The drive shall not incur physical damage or degraded performance as a result of...
Page 48 - Mechanical specifications
Seagate 1200 SSD Product Manual, Rev. C 47 6.6 Mechanical specifications Refer to Figure 17 or 18 for detailed mounting configuration dimensions. See Section 10.3, “Drive mounting.” Note. These dimensions conform to the Small Form Factor Standard documented in SFF-8201 and SFF-8223 found at www.sffc...
Page 50 - About FIPS; Purpose; Image is for reference only, does not represent actual drive.
Seagate 1200 SSD Product Manual, Rev. C 49 7.0 About FIPS The Federal Information Processing Standard (FIPS) Publication 140-2 is a U.S. Government Computer Security Standard used to accredit cryptographic modules. It is titled 'Security Requirements for Cryptographic Modules (FIPS PUB 140-2)' and i...
Page 51 - About self-encrypting drives; Data encryption; Admin and Locking SPs.
Seagate 1200 SSD Product Manual, Rev. C 50 8.0 About self-encrypting drives Self-encrypting drives (SEDs) offer encryption and security services for the protection of stored data, commonly known as “protection of data at rest.” These drives are compliant with the Trusted Computing Group (TCG) Enterp...
Page 52 - The download file must be signed and authenticated.
Seagate 1200 SSD Product Manual, Rev. C 51 8.4 Drive locking In addition to changing the passwords, as described in Section 8.2.3, the owner should also set the data access controls for the individual bands. The variable "LockOnReset" should be set to "PowerCycle" to ensure that the ...
Page 54 - Defect and error management; Drive internal defects/errors; Bit
Seagate 1200 SSD Product Manual, Rev. C 53 9.0 Defect and error management Seagate continues to use innovative technologies to manage defects and errors. These technologies are designed to increase data integrity, perform drive self-maintenance, and validate proper drive operation. SCSI defect and e...
Page 55 - Levels of PI; There are 4 types of Protection Information.; Setting and determining the current Type Level
Seagate 1200 SSD Product Manual, Rev. C 54 9.4 Auto-Reallocation Auto-Reallocation allows the drive to reallocate unreadable locations on a subsequent write command if the recovery process deems the location to be defective. The drive performs auto-reallocation on every WRITE command. With each writ...
Page 56 - Power is supplied through the SAS connector.; Figure 20. Physical interface
Seagate 1200 SSD Product Manual, Rev. C 55 10.0 Installation Seagate 1200 SSD drive installation is a plug-and-play process. There are no jumpers on the drive. SAS drives are designed to be used in a host system that provides a SAS-compatible backplane with bays designed to accommodate the drive. In...
Page 57 - Drive mounting
Seagate 1200 SSD Product Manual, Rev. C 56 Figure 21. Air flow Note. Image may not represent actual product, for reference only. 10.3 Drive mounting Mount the drive using the bottom or side mounting holes. If mounting the drive using the bottom holes, ensure not to physically distort the drive by at...
Page 58 - Interface requirements
Seagate 1200 SSD Product Manual, Rev. C 57 11.0 Interface requirements This section partially describes the interface requirements as implemented on Seagate 1200 SSD drives. Additional information is provided in the SAS Interface Manual (part number 100293071). 11.1 SAS features This section lists t...
Page 59 - SCSI commands supported; Command name
Seagate 1200 SSD Product Manual, Rev. C 58 11.3 SCSI commands supported Table 15 lists the SCSI commands supported by Seagate 1200 SSD drives. Table 15 Supported commands Command name Command code Supported CHANGE DEFINITION 40h N FORMAT UNIT [1] 04h Y DPRY bit supported N DCRT bit supported Y STPF ...
Page 64 - Bytes; PP 10 = INQUIRY data for an INQUIRY command received on Port A.
Seagate 1200 SSD Product Manual, Rev. C 63 11.3.1 INQUIRY data Table 16 lists the INQUIRY command data that the drive should return to the initiator per the format given in the SAS Interface Manual . Table 16Seagate 1200 SSD INQUIRY data Bytes Data (hex) 0-15 00 00 xx** 12 8B 01 PP 02 53 45 41 47 41...
Page 66 - Table 17 MODE SENSE data for 800GB drives
Seagate 1200 SSD Product Manual, Rev. C 65 Table 17 MODE SENSE data for 800GB drives MODE DATA HEADER: 01 5a 00 10 01 00 00 10 BLOCK DESCRIPTOR: 00 00 00 00 5d 26 ce b0 00 00 00 00 00 00 02 00 MODE PAGES: DEF 81 0a c0 01 5a 00 00 00 0b 00 ff ffCHG 81 0a 38 00 00 00 00 00 ff 00 00 00 DEF 82 0e 00 00 ...
Page 67 - Table 18 MODE SENSE data for 400GB drives
Seagate 1200 SSD Product Manual, Rev. C 66 Table 18 MODE SENSE data for 400GB drives MODE DATA HEADER: 01 5a 00 10 01 00 00 10 BLOCK DESCRIPTOR: 00 00 00 00 2e 93 90 b0 00 00 00 00 00 00 02 00 MODE PAGES: DEF 81 0a c0 01 5a 00 00 00 0b 00 ff ffCHG 81 0a 38 00 00 00 00 00 ff 00 00 00 DEF 82 0e 00 00 ...
Page 68 - MODE SENSE data for 200GB drives
Seagate 1200 SSD Product Manual, Rev. C 67 Table 19 MODE SENSE data for 200GB drives MODE DATA HEADER: 01 5a 00 10 01 00 00 10 BLOCK DESCRIPTOR: 00 00 00 00 17 49 f1 b0 00 00 00 00 00 00 02 00 MODE PAGES: DEF 81 0a c0 01 5a 00 00 00 0b 00 ff ffCHG 81 0a 38 00 00 00 00 00 ff 00 00 00 DEF 82 0e 00 00 ...
Page 69 - Table 20 MODE SENSE values for 100GB drives
Seagate 1200 SSD Product Manual, Rev. C 68 Table 20 MODE SENSE values for 100GB drives MODE DATA HEADER: 01 5a 00 10 01 00 00 10 BLOCK DESCRIPTOR: 00 00 00 00 0b a5 22 30 00 00 00 00 00 00 02 00 MODE PAGES: DEF 81 0a 00 01 5a 00 00 00 0b 00 ff ffCHG 81 0a 08 00 00 00 00 00 ff 00 00 00 DEF 82 0e 00 0...
Page 71 - Figure 23. SAS device plug dimensions; C OF DATUM B
Seagate 1200 SSD Product Manual, Rev. C 70 Figure 23. SAS device plug dimensions C OF DATUM B L 5.08 1.27 (6X) 1.27 (14X) 15.875 0.35MIN 15.875 33.43 0.05 B 4.90 0.08 0.84 0.05 (22X) 0.15 B P15 P1 S7 S1 SEE Detail1 0.30 0.05 (4X) 4.00 0.08 0.15 D 0.30 0.05 (2X) 41.13 0.15 B B C C A A 0.20 B 42.73 RE...
Page 73 - Figure 25. Micro SAS device plug dimensions
Seagate 1200 SSD Product Manual, Rev. C 72 Figure 25. Micro SAS device plug dimensions
Page 76 - Micro SAS pin descriptions
Seagate 1200 SSD Product Manual, Rev. C 75 Table 24 Micro SAS pin descriptions Pin Signal name Signal type Pin Signal name Signal type S1 Port A Ground P1* 3.3 Volts S2* +Port A_in Diff. input pair P2 3.3 Volts charge S3* -Port A_in P3 Ground S4 Port A Ground P4 Ground S5* -Port A_out Diff output pa...
Page 77 - and signal name information.
Seagate 1200 SSD Product Manual, Rev. C 76 11.4.7 Power The drive receives power (+3.3 volts, +5 volts and +12 volts) through the SAS device connector. Three +12 volt pins provide power to the drive, 2 short and 1 long. The current return for the +12 volt power supply is through the common ground pi...
Page 78 - SAS; Characteristic
Seagate 1200 SSD Product Manual, Rev. C 77 11.5.2 Differential signals The drive SAS differential signals comply with the intra-enclosure (internal connector) requirements of the SAS standard. Table 27 defines the general interface characteristics 11.6 SAS-3 Specification compliance Seagate SAS-3 dr...
Page 79 - Seagate Technology LLC
Seagate Technology LLC AMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000 ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888 EUROPE, MIDDLE EAST AND AFRICA S...
