Page 2 - Document Revision History; Revision; Added to the feature list updated specifications
© 2011 Seagate Technology LLC. All rights reserved. Publication number: 100633414, Rev. B January 2011 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Pipeline HD and SeaTools are either trademarks or regi...
Page 3 - Contents
Pipeline HD SATA Product Manual, Rev. B Contents Seagate Technology Support Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 5 - Pipeline HD SATA Product Manual, Rev. B; Figures; Figure 1
Pipeline HD SATA Product Manual, Rev. B Figures Figure 1 Typical Current Profiles (5V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Figure 2 Typical Current Profiles (12V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 7 - Seagate Technology Support Services
Pipeline HD SATA Product Manual, Rev. B 7 For information regarding online support and services, visit http://www.seagate.com/www/en-us/about/contact_us/ Available services include: • Presales & Technical support • Global Support Services telephone numbers & business hours • Authorized Servi...
Page 9 - About the Serial ATA Interface
Pipeline HD SATA Product Manual, Rev. B 9 1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate Pipeline HD ® SATA model drives: These drives provide the following key features: • 5900 RPM spindle speed • High instantaneous (burst) d...
Page 11 - Drive Specifications; the drive; Specification summary tables; Drive specification
Pipeline HD SATA Product Manual, Rev. B 11 2.0 Drive Specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive mode...
Page 12 - Drive Specifications
12 Pipeline HD SATA Product Manual, Rev. B Drive Specifications www.seagate.com * One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. * *During periods of drive idle, some offline activity may occur...
Page 13 - Formatted capacity
Pipeline HD SATA Product Manual, Rev. B 13 www.seagate.com Drive Specifications 2.2 Formatted capacity *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. 2.2.1 LBA mode When addressing these drive...
Page 14 - Physical characteristics; Note; Power specifications; Figure 3; Read Write
14 Pipeline HD SATA Product Manual, Rev. B Drive Specifications www.seagate.com 2.5 Physical characteristics Maximum height 2000GB and 1500GB models 26.1mm / 1.028 in Maximum width 101.6mm / 4.0 in (± 0.010 in) Maximum length 147.00mm / 5.78 in Typical weight 2000GB and 1500GB models 635g / 1.39 lb ...
Page 15 - Avg 5V typ amps
Pipeline HD SATA Product Manual, Rev. B 15 www.seagate.com Drive Specifications • Spinup power Spinup power is measured from the time of power-on to the time that the drive spindle reaches operating speed. • Read/write power and current Read/write power is measured with the heads on track, based on ...
Page 17 - mands and returns to Active mode any time disk access is necessary.; Power modes
Pipeline HD SATA Product Manual, Rev. B 17 www.seagate.com Drive Specifications 2.8.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the +12V line or an equivalent 15-ohm resistive load on the +5V line. • Using 12V power, ...
Page 18 - Environmental specifications; Figure 4; Relative humidity
18 Pipeline HD SATA Product Manual, Rev. B Drive Specifications www.seagate.com 2.9 Environmental specifications 2.9.1 Drive case temperature Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Drive case temperature should be measured at the locat...
Page 19 - Operating vibration
Pipeline HD SATA Product Manual, Rev. B 19 www.seagate.com Drive Specifications 2000GB and 1500GB models The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 300 Gs based on a nonrepetitive ...
Page 20 - Electromagnetic immunity; Seek; Test; Surge immunity ± 1 kV differential, ± 2 kV common, AC mains
20 Pipeline HD SATA Product Manual, Rev. B Drive Specifications www.seagate.com 2.10 Acoustics Table 3 Fluid Dynamic Bearing (FDB) motor acoustics 2.0 bels (typ) 2.2 bels (max) 2.2 bels (typ) 2.4 bels (max) Drive acoustics are measured as overall A-weighted acoustic sound power levels (no pure tones...
Page 21 - Agency certification; Korean RRL; • Family name: Pipeline HD; Radio and television interference.
Pipeline HD SATA Product Manual, Rev. B 21 www.seagate.com Drive Specifications 2.12 Warranty To determine the warranty for a specific drive, use a web browser to access the following web page: support.seagate.com/customer/warranty_validation.jsp From this page, click on the “Verify Your Warranty” l...
Page 22 - • Reorient the receiving antenna.; Environmental protection
22 Pipeline HD SATA Product Manual, Rev. B Drive Specifications www.seagate.com This equipment is designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this e...
Page 23 - Corrosive environment
Pipeline HD SATA Product Manual, Rev. B 23 www.seagate.com Drive Specifications 2.15 Corrosive environment Seagate electronic drive components pass accelerated corrosion testing equivalent to 10 years exposure to light industrial environments containing sulfurous gases, chlorine and nitric oxide, cl...
Page 25 - Configuring and Mounting the Drive; Handling and static-discharge precautions; • Handle the drive by its edges or frame; Configuring the drive; Table 5
Pipeline HD SATA Product Manual, Rev. B 25 3.0 Configuring and Mounting the Drive This section contains the specifications and instructions for configuring and mounting the drive. 3.1 Handling and static-discharge precautions After unpacking, and before installation, the drive may be exposed to pote...
Page 26 - Configuring and Mounting the Drive; Drive mounting
26 Pipeline HD SATA Product Manual, Rev. B Configuring and Mounting the Drive www.seagate.com Figure 3 Attaching SATA cabling Each cable is keyed to ensure correct orientation. Pipeline HD drives support latching SATA connectors. 3.4 Drive mounting You can mount the drive in any orientation using fo...
Page 29 - Serial ATA Interface; Hot-Plug compatibility; Segment; Signal
Pipeline HD SATA Product Manual, Rev. B 29 4.0 Serial ATA Interface These drives use the industry-standard Serial ATA (SATA) interface that supports FIS data transfers. It supports ATA programmed input/output (PIO) modes 0 to 4; multiword DMA modes 0 to 2, and Ultra DMA modes 0 to 6. For detailed in...
Page 30 - Serial ATA Interface; Supported ATA commands; Power; Command name
30 Pipeline HD SATA Product Manual, Rev. B Serial ATA Interface www.seagate.com Notes: 1. All pins are in a single row, with a 1.27mm (0.050”) pitch. 2. The comments on the mating sequence apply to the case of backplane blindmate connector only. In this case, the mating sequences are: • the ground p...
Page 33 - Word
Pipeline HD SATA Product Manual, Rev. B 33 www.seagate.com Serial ATA Interface 4.3.1 Identify Device command The Identify Device command (command code EC H ) transfers information about the drive to the host following power up. The data is organized as a single 4096-byte block of data, whose conten...
Page 35 - xx
Pipeline HD SATA Product Manual, Rev. B 35 www.seagate.com Serial ATA Interface 81 Minor version number 0028 H 82 Command sets supported 346B H 83 Command sets supported 7F01 H 84 Command sets support extension (see note following this table) 4123 H See Word 108-111 note. (4123 H = 010000010010001 b...
Page 36 - Bit
36 Pipeline HD SATA Product Manual, Rev. B Serial ATA Interface www.seagate.com Table 8 Bit Descriptions Description (if bit is set to 1) Bit Word 63 0 Multiword DMA mode 0 is supported. 1 Multiword DMA mode 1 is supported. 2 Multiword DMA mode 2 is supported. 8 Multiword DMA mode 0 is currently act...
Page 38 - Draft; Code in features register
38 Pipeline HD SATA Product Manual, Rev. B Serial ATA Interface www.seagate.com 4.3.3 S.M.A.R.T. commands S.M.A.R.T. provides near-term failure prediction for disk drives. When S.M.A.R.T. is enabled, the drive monitors predetermined drive attributes that are susceptible to degradation over time. If ...
Page 39 - Index
Pipeline HD SATA Product Manual, Rev. B 39 Index A ACA 21 Acceleration 19 Acoustics 20 Active 17 Active mode 17 Agency certification 21 Altitude 18 Ambient temperature 14 , 18 Areal density 9 , 13 ATA commands 30 Australia/New Zealand Standard AS/NZ CISPR22 21 Australian Communication Authority (ACA...
