Page 2 - Document Revision History; Revision
© 2014 Seagate Technology LLC. All rights reserved. Publication number: 100740544, Rev. C June 2014 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Constellation ES and SeaTools are either trademarks or re...
Page 3 - Contents
Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. C Contents Seagate Technology Support Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 5 - Seagate Technology Support Services
Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. C 1 For information regarding online support and services, visit: http://www.seagate.com/about/contact-us/technical-support/ Available services include: • Presales & Technical support • Global Support Services telephone numbe...
Page 6 - Introduction; These drives provide the following key features:; Note
Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. C 2 1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following: Seagate ® Enterprise Capacity 3.5 HDD v4 Serial ATA model drives:. These drives provide the following key featu...
Page 7 - About the Serial ATA interface
Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. C 3 1.1 About the Serial ATA interface The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages include: • Easy installation and configuration with true plug-and-p...
Page 8 - Drive specifications; the drive; Specification summary tables; Table 1 Drive specifications summary; Drive specification
Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. C 4 2.0 Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to i...
Page 10 - Formatted capacity; ST models; LBA mode; where; Recording and interface technology
Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. C 6 2.2 Formatted capacity ST models Formatted capacity* Guaranteed sectors Bytes per logical sector ST6000NM0024 ST6000NM0044 ST6000NM0084 6TB 11,721,045,168 512 ST5000NM0084 5TB 9,767,541,168 ST4000NM0024 ST4000NM0044 4TB 7,814...
Page 11 - Power specifications; Power consumption
Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. C 7 2.5 Power specifications The drive receives DC power (+5V or +12V) through a native SATA power connector. See Figure 8 on page 22. 2.5.1 Power consumption Power requirements for the drives are listed in Table 2 through Table ...
Page 14 - Typical current profiles
Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. C 10 2.5.1.1 Typical current profiles Figure 1. 6TB & ST5000NM0084 Typical 5V startup and operation current profile Figure 2. 6TB & ST5000NM0084 Typical 12V startup and operation current profile
Page 15 - TB Typical 5V startup and operation current profile
Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. C 11 2.5.1.2 Typical current profiles Figure 3. 4TB Typical 5V startup and operation current profile Figure 4. 4TB Typical 12V startup and operation current profile
Page 16 - TB Typical 5V startup and operation current profile
Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. C 12 2.5.1.3 Typical current profiles Figure 5. 2TB Typical 5V startup and operation current profile Figure 6. 2TB Typical 12V startup and operation current profile
Page 17 - • Using 5V power, the drive is expected to operate with a maximum of
Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. C 13 2.5.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the +12 V line or an equivalent 15-ohm resistive load on the +5V line.• Using 12V power, the ...
Page 19 - Environmental limits; Temperature; The maximum allowable drive case temperature is 140°F (60°C).; Location of the HDA temperature check point; Humidity
Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. C 15 2.6 Environmental limits Temperature and humidity values experienced by the drive must be such that condensation does not occur on any drive part. Altitude and atmospheric pressure specifications are referenced to a standard...
Page 20 - Shock may be applied in the X, Y or Z axis.; TB models
Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. C 16 2.6.4 Shock All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws. Shock may be applied in the X, Y or Z axis. 2.6.4.1 Operating shock These drives compl...
Page 21 - Acoustics; Electromagnetic immunity; Performance seek; Test
Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. C 17 2.7 Acoustics Drive acoustics are measured as overall A-weighted acoustic sound power levels (no pure tones). All measurements are consistent with ISO document 7779. Sound power measurements are taken under essentially free-...
Page 23 - Korean RRL; Enterprise Capacity 3.5 HDD Serial ATA; Australian RCM Mark; Part; Radio and television interference.; How to Identify and Resolve
Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. C 19 Korean RRL If these drives have the Korean Communications Commission (KCC) logo, they comply with paragraph 1 of Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (...
Page 25 - required to determine remaining warranty information.; Shipping
Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. C 21 2.14 Reference documents Trusted Computing Group (TCG) Documents (apply to Self-Encrypting Drive models only) TCG Storage Architecture Core Specification, Rev. 1.0 TCG Storage Security Subsystem Class Enterprise Specificatio...
Page 26 - Configuring and mounting the drive; Handling and static-discharge precautions; Figure 8. Attaching SATA cabling; Drive mounting; Figure 9. Breather hole location - top cover
Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. C 22 3.0 Configuring and mounting the drive This section contains the specifications and instructions for configuring and mounting the drive. 3.1 Handling and static-discharge precautions After unpacking, and before installation,...
Page 27 - Mechanical specifications; Refer to; TB models
Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. C 23 3.4.1 Mechanical specifications Refer to Figure 10 and 11 for detailed mounting configuration dimensions. See Section 3.4, “Drive mounting.” mm in mm in mm in Figure 10. Mounting configuration dimensions (2TB & 4TB) Note...
Page 29 - About FIPS; Purpose; Example of FIPS tamper evidence labels.
Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. C 25 4.0 About FIPS The Federal Information Processing Standard (FIPS) Publication 140-2 is a U.S. Government Computer Security Standard used to accredit cryptographic modules. It is titled 'Security Requirements for Cryptographi...
Page 30 - About self-encrypting drives; • Trusted Send; Data encryption; Admin SP
Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. C 26 5.0 About self-encrypting drives Self-encrypting drives (SEDs) offer encryption and security services for the protection of stored data, commonly known as “protection of data at rest.” These drives are compliant with the Tru...
Page 31 - Admin and Locking SPs.; Drive locking; The download file must be signed and authenticated.
Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. C 27 5.3 Random number generator (RNG) The drive has a 32-byte hardware RNG that it is uses to derive encryption keys or, if requested to do so, to provide random numbers to the host for system use, including using these numbers ...
Page 33 - Hot-Plug compatibility; The drive motor must come to a complete stop; Serial ATA device plug connector pin definitions; Segment Pin; Signal
Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. C 29 6.0 Serial ATA (SATA) interface These drives use the industry-standard Serial ATA interface that supports FIS data transfers. It supports ATA programmed input/output (PIO) modes 0–4; multiword DMA modes 0–2, and Ultra DMA mo...
Page 34 - Supported ATA commands; page; Command name
Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. C 30 Notes: 1. All pins are in a single row, with a 1.27mm (0.050”) pitch. 2. The comments on the mating sequence apply to the case of backplane blindmate connector only. In this case, the mat-ing sequences are: • the ground pins...
Page 36 - Identify Device command; The Identify Device command (command code EC; Word
Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. C 32 6.3.1 Identify Device command The Identify Device command (command code EC H ) transfers information about the drive to the host following power up. The data is organized as a single 512-byte block of data, whose contents ar...
Page 38 - Bit
Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. C 34 100–103 Total number of user-addressable LBA sectors available (see Section 2.2 for related information). These words are required for drives that support the 48-bit addressing feature. Maximum value: 0000FFFFFFFFFFFFh. ST60...
Page 40 - Set Features command
Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. C 36 6.3.2 Set Features command This command controls the implementation of various features that the drive supports. When the drive receives this command, it sets BSY, checks the contents of the Features register, clears BSY and...
Page 41 - Draft; Code in features register
Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. C 37 6.3.3 S.M.A.R.T. commands S.M.A.R.T. provides near-term failure prediction for disk drives. When S.M.A.R.T. is enabled, the drive monitors predetermined drive attributes that are susceptible to degradation over time. If self...
Page 42 - NDEX
S EAGATE E NTERPRISE C APACITY 3.5 HDD V 4 S ERIAL ATA P RODUCT M ANUAL , R EV . C 38 I NDEX A Accessible Max Address Configuration 30 acoustics 17 Admin SP 26 AES-256 data encryption 26 Agency certification 18 altitude 15 ambient 15 ambient temperature 7 Annualized Failure Rate (AFR) 18 areal densi...
Page 45 - Seagate Technology LLC
Seagate Technology LLC AMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000 ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888 EUROPE, MIDDLE EAST AND AFRICA S...
